ASROCK FM2A85X Extreme6 User manual

Brand: ASROCK

Model: FM2A85X Extreme6

Category: Motherboards

Type: User manual

FM2A85X Extreme6

User Manual

Version 1.0

Published September 2012

No part of this manual may be reproduced, transcribed, transmitted, or translated in

any language, in any form or by any means, except duplication of documentation by

the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this manual may or may not be regis-

tered trademarks or copyrights of their respective companies, and are used only for

identication or explanation and to the owners’ benet, without intent to infringe.

Disclaimer:

Specications and information contained in this manual are furnished for informa-

tional use only and subject to change without notice, and should not be constructed

as a commitment by ASRock. ASRock assumes no responsibility for any errors or

omissions that may appear in this manual.

With respect to the contents of this manual, ASRock does not provide warranty of

any kind, either expressed or implied, including but not limited to the implied warran-

ties or conditions of merchantability or tness for a particular purpose.

In no event shall ASRock, its directors, ofcers, employees, or agents be liable for

any indirect, special, incidental, or consequential damages (including damages for

loss of prots, loss of business, loss of data, interruption of business and the like),

even if ASRock has been advised of the possibility of such damages arising from

any defect or error in the manual or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-

lowing two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic

substance controlled in Perchlorate Best Management Practices (BMP) regulations

passed by the California Legislature. When you discard the Lithium battery in Cali-

fornia, USA, please follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see

www.dtsc.ca.gov/hazardouswaste/perchlorate”

ASRock Website: http://www.asrock.com

Contents

1. Introduction ................................................................ 5

1.1 Package Contents ..................................................................... 5

1.2 Specications ............................................................................. 6

1.3 Unique Features ........................................................................ 10

1.4 Motherboard Layout ................................................................. 14

1.5 I/O Panel .................................................................................. 15

2. Installation .................................................................. 17

Pre-installation Precautions ................................................................ 17

2.1 CPU Installation ......................................................................... 18

2.2 Installation of CPU Fan and Heatsink ...................................... 18

2.3 Installation of Memory Modules (DIMM) .................................... 19

2.4 Expansion Slots (PCI and PCI Express Slots) ........................... 21

2.5 CrossFireX

, 3-Way CrossFireX

and Quad CrossFireX

Operation Guide ........................................................................ 22

2.6 Dual Graphics Operation Guide ................................................ 27

2.7 Multi Monitor and Surround Display Features .......................... 29

2.8 ASRock Smart Remote Installation Guide ................................. 32

2.9 Jumpers Setup ........................................................................... 34

2.10 Onboard Headers and Connectors ....................................... 35

2.11 Smart Switches .......................................................................... 40

2.12 Dr. Debug .............................................................................. 41

2.13 Serial ATA3 (SATA3) Hard Disks Installation ......................... 42

2.14 Hot Plug and Hot Swap Functions for SATA3 HDDs ................. 42

2.15 SATA3 HDD Hot Plug and Hot Swap Feature and Operation

Operation Guide ........................................................................ 43

2.16 Driver Installation Guide ............................................................ 45

2.17 Installing Windows

8 / 8 64-bit / 7 / 7 64-bit / Vista

/ Vista

64-bit With RAID Functions ....................................................... 45

2.18 Installing Windows

8 / 8 64-bit / 7 / 7 64-bit / Vista

/ Vista

64-bit Without RAID Functions .................................................. 46

3. UEFI SETUP UTILITY .................................................. 47

3.1 Introduction ................................................................................ 47

3.1.1 UEFI Menu Bar ................................................................ 47

3.1.2 Navigation Keys ............................................................... 48

3.2 Main Screen ............................................................................... 48

3.3 OC Tweaker Screen................................................................... 49

3.4 Advanced Screen ...................................................................... 52

3.4.1 CPU Conguration ........................................................... 53

3.4.2 North Bridge Conguration .............................................. 54

3.4.3 South Bridge Conguration ............................................. 55

3.4.4 Storage Conguration ...................................................... 56

3.4.5 Super IO Conguration .................................................... 57

3.4.6 ACPI Conguration .......................................................... 58

3.4.7 USB Conguration ........................................................... 60

3.5 Tool ............................................................................................ 61

3.6 Hardware Health Event Monitoring Screen ............................... 64

3.7 Boot Screen ............................................................................... 65

3.8 Security Screen ......................................................................... 67

3.9 Exit Screen ................................................................................ 69

4. Software Support ....................................................... 70

4.1 Install Operating System ............................................................ 70

4.2 Support CD Information ............................................................. 70

4.2.1 Running Support CD ....................................................... 70

4.2.2 Drivers Menu ................................................................... 70

4.2.3 Utilities Menu ................................................................... 70

4.2.4 Contact Information ......................................................... 70

1. Introduction

Thank you for purchasing ASRock FM2A85X Extreme6 motherboard, a reliable

motherboard produced under ASRock’s consistently stringent quality control. It

delivers excellent performance with robust design conforming to ASRock’s commit-

ment to quality and endurance.

In this manual, chapter 1 and 2 contain introduction of the motherboard and step-

by-step guide to the hardware installation. Chapter 3 and 4 contain the conguration

guide to BIOS setup and information of the Support CD.

Because the motherboard specications and the BIOS software might

be updated, the content of this manual will be subject to change without

notice. In case any modications of this manual occur, the updated ver-

sion will be available on ASRock website without further notice. You may

nd the latest VGA cards and CPU support lists on ASRock website as

well. ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit

our website for specic information about the model you are using.

www.asrock.com/support/index.asp

1.1 Package Contents

ASRock FM2A85X Extreme6 Motherboard (ATX Form Factor)

ASRock FM2A85X Extreme6 Quick Installation Guide

ASRock FM2A85X Extreme6 Support CD

4 x Serial ATA (SATA) Data Cables (Optional)

1 x I/O Panel Shield

ASRock Reminds You...

To get better performance in Windows

8 / 8 64-bit / 7 / 7 64-bit / Vista

/ Vista

64-bit, it is recommended to set the BIOS option in Storage

Conguration to AHCI mode.

1.2 Specications

Platform -ATXFormFactor

 -PremiumGoldCapacitordesign(100%Japan-made

 high-qualityConductivePolymerCapacitors)

CPU -SupportforSocketFM2100Wprocessors

 -DigiPowerDesign

 -8+2PowerPhaseDesign

 -SupportsAMD’sCool‘n’Quiet

Technology

 -UMI-LinkGEN2

Chipset -AMDA85X(Hudson-D4)

Memory -DualChannelDDR3MemoryTechnology

 -4xDDR3DIMMslots

 -SupportDDR32600+(OC)/2400(OC)/2133(OC)/1866/1600/

 1333/1066/800non-ECC,un-bufferedmemory

 (seeCAUTION 1)

 *2600+isonlysupportedwithtwoDIMMs

 -Max.capacityofsystemmemory:64GB(seeCAUTION 2)

 -SupportsIntel

ExtremeMemoryProle(XMP)1.3/1.2

 -SupportsAMDMemoryProle(AMP)

Expansion Slot -3xPCIExpress2.0x16slots

 (PCIE2/PCIE4:singleatx16(PCIE2)/x8(PCIE4),ordual

 atx8(PCIE2)/x8(PCIE4);PCIE5:x4mode)

 -2xPCIExpress2.0x1slots

 -2xPCIslots

 -SupportsAMDQuadCrossFireX

,3-WayCrossFireX

,

 CrossFireX

andDualGraphics

Graphics  -AMDRadeonHD7000graphics

 -DirectX11,PixelShader5.0

 -Max.sharedmemory2GB

 -FourVGAOutputoptions:D-Sub,DVI-D,HDMIand

 DisplayPort(seeCAUTION 3)

 -SupportsHDMI1.4aTechnologywithmax.resolutionupto

 1920x1200@60Hz

 -SupportsDual-linkDVIwithmax.resolutionupto

 2560x1600@75Hz

 -SupportsD-Subwithmax.resolutionupto1920x1600@

 60Hz

 -SupportsDisplayPort1.2withmax.resolutionupto

 4096x2160@30Hz

 -SupportsDP++

 -SupportsMulti-Streaming

 -SupportsAutoLipSync,DeepColor(12bpc),xvYCCand

 HBR(HighBitRateAudio)withHDMI(CompliantHDMI

 monitorisrequired)(seeCAUTION 4)

 -SupportsBlu-rayStereoscopic3DwithHDMI1.4a

 -SupportsAMDSteadyVideo

2.0:Newvideopost

 processingcapabilityforautomaticjutterreductiononhome/

 onlinevideo

 -SupportsHDCPfunctionwithDVI,HDMIandDisplayPort

 ports

 -SupportsFullHD1080pBlu-ray(BD)/HD-DVDplayback

 withDVI,HDMIandDisplayPortports

Audio -7.1CHHDAudiowithContentProtection

 (RealtekALC898AudioCodec)

 -PremiumBlu-rayaudiosupport

 -SupportsTHXTruStudio

LAN -PCIEx1GigabitLAN10/100/1000Mb/s

 -RealtekRTL8111E

 -SupportsWake-On-LAN

 -SupportsLANCableDetection

 -SupportsEnergyEfcientEthernet802.3az

 -SupportsPXE

Rear Panel I/O I/OPanel

 -1xPS/2Mouse/KeyboardPort

 -1xD-SubPort

 -1xDVI-DPort

 -1xHDMIPort

 -1xDisplayPort

 -1xOpticalSPDIFOutPort

 -2xReady-to-UseUSB2.0Ports

 -1xeSATA3Connector

 -4xReady-to-UseUSB3.0Ports

 -1xRJ-45LANPortwithLED(ACT/LINKLEDandSPEED

 LED)

 -1xClearCMOSSwitchwithLED

 -HDAudioJack:RearSpeaker/Central/Bass/Linein/Front

 Speaker/Microphone

SATA3 -7xSATA36.0Gb/sconnectors,supportRAID(RAID0,

 RAID1,RAID5andRAID10),NCQ,AHCIand“HotPlug”

 functions

USB 3.0 -2xRearUSB3.0portsbyAMDA85X(Hudson-D4),support

 USB1.1/2.0/3.0upto5Gb/s

 -2xRearUSB3.0portsbyASMediaASM1042,supportUSB

 1.1/2.0/3.0upto5Gb/s

 -1xFrontUSB3.0header(supports2USB3.0ports)by

 AMDA85X(Hudson-D4),supportsUSB1.1/2.0/3.0upto

 5Gb/s

Connector -7xSATA36.0Gb/sconnectors

 -1xIRheader

 -1xCIRheader

 -1xCOMportheader

 -1xHDMI_SPDIFheader

 -1xPowerLEDheader

 -1xChassisIntrusionheader

 -2xCPUFanconnectors(1x4-pin,1x3-pin)

 -3xChassisFanconnectors(1x4-pin,2x3-pin)

 -1xPowerFanconnector(3-pin)

 -24pinATXpowerconnector

 -8pin12Vpowerconnector

 -XFirepowerconnector

 -Frontpanelaudioconnector

 -3xUSB2.0headers(support6USB2.0ports)

 -1xUSB3.0header(supports2USB3.0ports)

 -1xDr.Debug(7-SegmentDebugLED)

 -1xPowerSwitchwithLED

 -1xResetSwitchwithLED

BIOS Feature -64MbAMIUEFILegalBIOSwithGUIsupport

 -Supports“PlugandPlay”

 -ACPI1.1ComplianceWakeUpEvents

 -Supportsjumperfree

 -SMBIOS2.3.1Support

 -DRAM,APUPCIEVDDP,CPUandCPUNB/GFXVoltage

 Multi-adjustment

Support CD -Drivers,Utilities,AntiVirusSoftware(TrialVersion),

 CyberLinkMediaEspresso6.5Trial,GoogleChrome

 BrowserandToolbar

Hardware  -CPUTemperatureSensing

Monitor -ChassisTemperatureSensing

 -CPU/Chassis/PowerFanTachometer

 -CPUQuietFan

 -CPU/ChassisFanMulti-SpeedControl

 -CASEOPENdetection

 -VoltageMonitoring:+12V,+5V,+3.3V,Vcore

WARNING

Please realize that there is a certain risk involved with overclocking,

including adjusting the setting in the BIOS, applying Untied Overclocking

Technology, or using third-party overclocking tools. Overclocking may

affect your system’s stability, or even cause damage to the components

and devices of your system. It should be done at your own risk and

expense. We are not responsible for possible damage caused by

overclocking.

CAUTION!

1. Whether 2600/2400/2133/1866/1600MHz memory speed is

supported depends on the CPU you adopt. If you want to adopt

DDR3 2600/2400/2133/1866/1600 memory module on this

motherboard, please refer to the memory support list on our

website for the compatible memory modules.

ASRock website http://www.asrock.com

2. Due to the operating system limitation, the actual memory size

may be less than 4GB for the reservation for system usage un-

der Windows

8 / 7 / Vista

. For Windows

64-bit OS with 64-

bit CPU, there is no such limitation. You can use ASRock XFast

RAM to utilize the memory that Windows

cannot use.

3. You can choose to use three of the four monitors only. D-Sub,

DVI-D, HDMI and DisplayPort monitors cannot be enabled at

the same time. Besides, with the DVI-to-HDMI adapter, the DVI-

D port can support the same features as HDMIport.

4. xvYCC and Deep Color are only supported under Windows

64-bit / 8 / 7 64-bit / 7. Deep Color mode will be enabled only

if the display supports 12bpc in EDID. HBR is supported under

Windows

8 64-bit / 8 / 7 64-bit / 7 / Vista

64-bit / Vista

OS - Microsoft

Windows

8 / 8 64-bit / 7 / 7 64-bit / Vista

Vista

64-bit compliant

Certications - FCC, CE, WHQL

- ErP/EuP Ready (ErP/EuP ready power supply is required)

* For detailed product information, please visit our website: http://www.asrock.com

1.3 Unique Features

ASRock Extreme Tuning Utility (AXTU)

ASRock Extreme Tuning Utility (AXTU) is an all-in-one tool to

ne-tune different system functions in a user-friendly interface,

which includes Hardware Monitor, Fan Control, Overclocking,

OC DNA, IES and XFast RAM. In Hardware Monitor, it shows

the major readings of your system. In Fan Control, it shows the

fan speed and temperature for you to adjust. In Overclocking,

you are allowed to overclock CPU frequency for optimal system

performance. In OC DNA, you can save your OC settings as

a prole and share it with your friends. Your friends then can

load the OC prole to their own system to get the same OC set-

tings. In IES (Intelligent Energy Saver), the voltage regulator

can reduce the number of output phases to improve efciency

when the CPU cores are idle without sacricing computing per-

formance. In XFast RAM, it fully utilizes the memory space that

cannot be used under Windows

OS 32-bit CPU.

ASRock Instant Boot

ASRock Instant Boot allows you to turn on your PC in just a few

seconds, provides a much more efcient way to save energy,

time, money, and improves system running speed for your sys-

tem. It leverages the S3 and S4 ACPI features which normally

enable the Sleep/Standby and Hibernation modes in Windows

to shorten boot up time. By calling S3 and S4 at specic timing

during the shutdown and startup process, Instant Boot allows

you to enter your Windows

desktop in a few seconds.

ASRock Instant Flash

ASRock Instant Flash is a BIOS ash utility embedded in Flash

ROM. This convenient BIOS update tool allows you to update

system BIOS without entering operating systems rst like MS-

DOS or Windows

. With this utility, you can press the <F6> key

during the POST or the <F2> key to enter into the BIOS setup

menu to access ASRock Instant Flash. Just launch this tool and

save the new BIOS le to your USB ash drive, oppy disk or

hard drive, then you can update your BIOS only in a few clicks

without preparing an additional oppy diskette or other compli-

cated ash utility. Please be noted that the USB ash drive or

hard drive must use FAT32/16/12 le system.

ASRock APP Charger

If you desire a faster, less restricted way of charging your

Apple devices, such as iPhone/iPad/iPod Touch, ASRock has

prepared a wonderful solution for you - ASRock APP Charger.

Simply install the APP Charger driver, it makes your iPhone

charge much quickly from your computer and up to 40% faster

than before. ASRock APP Charger allows you to quickly charge

many Apple devices simultaneously and even supports continu-

ous charging when your PC enters into Standby mode (S1),

Suspend to RAM (S3), hibernation mode (S4) or power off (S5).

With APP Charger driver installed, you can easily enjoy the mar-

velous charging experience.

ASRock XFast USB

ASRock XFast USB can boost USB storage device perfor-

mance. The performance may depend on the properties of the

device.

ASRock XFast LAN

ASRock XFast LAN provides a faster internet access, which

includes the benefits listed below. LAN Application Prioritiza-

tion: You can congure your application’s priority ideally and/or

add new programs. Lower Latency in Game: After setting online

game’s priority higher, it can lower the latency in games. Trafc

Shaping: You can watch Youtube HD videos and download si-

multaneously. Real-Time Analysis of Your Data: With the status

window, you can easily recognize which data streams you are

transferring currently.

ASRock XFast RAM

ASRock XFast RAM is a new function that is included into AS-

Rock Extreme Tuning Utility (AXTU). It fully utilizes the memory

space that cannot be used under Windows

OS 32-bit CPU.

ASRock XFast RAM shortens the loading time of previously

visited websites, making web surfing faster than ever. And it

also boosts the speed of Adobe Photoshop 5 times faster. An-

other advantage of ASRock XFast RAM is that it reduces the

frequency of accessing your SSDs or HDDs in order to extend

their lifespan.

ASRock Crashless BIOS

ASRock Crashless BIOS allows users to update their BIOS

without fear of failing. If power loss occurs during the BIOS up-

date process, ASRock Crashless BIOS will automatically nish

the BIOS update procedure after regaining power. Please note

that BIOS les need to be placed in the root directory of your

USB disk. Only USB2.0 ports support this feature.

ASRock OMG (Online Management Guard)

Administrators are able to establish an internet curfew or restrict

internet access at specied times via OMG. You may schedule

the starting and ending hours of internet access granted to other

users. In order to prevent users from bypassing OMG, guest

accounts without permission to modify the system time are re-

quired.

ASRock Internet Flash

ASRock Internet Flash searches for available UEFI firmware

updates from our servers. In other words, the system can auto-

detect the latest UEFI from our servers and ash them without

entering Windows

OS. Please note that you must be running

on a DHCP congured computer in order to enable this function.

ASRock UEFI System Browser

ASRock UEFI system browser is a useful tool included in

graphical UEFI. It can detect the devices and configurations

that users are currently using in their PC. With the UEFI system

browser, you can easily examine the current system congura-

tion in UEFI setup.

ASRock Dehumidier Function

Users may prevent motherboard damages due to dampness by

enabling “Dehumidier Function”. When enabling Dehumidier

Function, the computer will power on automatically to dehumidi-

fy the system after entering S4/S5 state.

ASRock Easy RAID Installer

ASRock Easy RAID Installer can help you to copy the RAID

driver from a support CD to your USB storage device. After

copying the RAID driver to your USB storage device, please

change “SATA Mode” to “RAID”, then you can start installing the

OS in RAID mode.

ASRock Interactive UEFI

ASRock Interactive UEFI is a blend of system configuration

tools, cool sound effects and stunning visuals. The unprec-

edented UEFI provides a more attractive interface and brings a

lot more amusing.

ASRock Fast Boot

With ASRock’s exclusive Fast Boot technology, it takes less

than 1.5 seconds to logon to Windows

8 from a cold boot. No

more waiting! The speedy boot will completely change your user

experience and behavior.

ASRock X-Boost

Brilliantly designed for combo overclocking, ASRock X-Boost

Technology is able to unleash the hidden power of your CPUs.

Simply press “X” when turning on the PC, X-Boost will automati-

cally overclock the relative components to get up to 15.77%

performance boost! With the smart X-Boost, overclocking CPU

can become a near one-button process.

ASRock Restart to UEFI

Windows

8 brings the ultimate boot up experience. The light-

ning boot up speed makes it hard to access the UEFI setup. AS-

Rock Restart to UEFI technology is designed for those requiring

frequent UEFI access. It is included in ASRock’s exclusive all-

in-one AXTU tuning program that allows users to easily enter

the UEFI automatically when turning on the PC next time. Just

simply enable this function; the PC will be assured to access the

UEFI directly in the very beginning.

Lucid Virtu Universal MVP

VIRTU Universal MVP includes the base features of Virtu

Universal technology, which virtualizes integrated GPU and

discrete GPU for best of breed functionality. It also features Vir-

tual Vsync™ for no-compromise visual quality. With the added

benets of HyperFormance technology, VIRTU Universal MVP

improves game performance by intelligently reducing redundant

rendering tasks in the ow between the CPU, GPU and the dis-

play.

1.4 Motherboard Layout

1 ATX 12V Power Connector (ATX12V1) 22 Chassis Fan Connector (CHA_FAN1)

2 CPU Heatsink Retention Module 23 Infrared Module Header (IR1)

3 CPU Socket 24 Clear CMOS Jumper (CLRCMOS1)

4 Power Fan Connector (PWR_FAN1) 25 SPI Flash Memory (64Mb)

5 CPU Fan Connector (CPU_FAN1) 26 USB 2.0 Header (USB_0_1)

6 CPU Fan Connector (CPU_FAN2) 27 USB 2.0 Header (USB_2_3)

7 2 x 240-pin DDR3 DIMM Slots 28 USB 2.0 Header (USB_4_5)

(Dual Channel A: DDR3_A1, DDR3_B1) 29 Consumer Infrared Module Header (CIR1)

8 2 x 240-pin DDR3 DIMM Slots 30 Chassis Intrusion Header (CI1)

(Dual Channel B: DDR3_A2, DDR3_B2) 31 COM Port Header (COM1)

9 ATX Power Connector (ATXPWR1) 32 HDMI_SPDIF Header (HDMI_SPDIF1)

10 USB 3.0 Header (USB3_5_6) 33 Front Panel Audio Header (HD_AUDIO1)

11 Southbridge Controller 34 PCI Express 2.0 x16 Slot (PCIE5)

12 SATA3 Connectors (SATA3_1_2) 35 PCI Slot (PCI2)

13 SATA3 Connectors (SATA3_3_4) 36 PCI Express 2.0 x16 Slot (PCIE4)

14 SATA3 Connectors (SATA3_7_8) 37 PCI Slot (PCI1)

15 SATA3 Connector (SATA3_5) 38 PCI Express 2.0 x1 Slot (PCIE3)

16 Power LED Header (PLED1) 39 PCI Express 2.0 x16 Slot (PCIE2)

17 System Panel Header (PANEL1) 40 PCI Express 2.0 x1 Slot (PCIE1)

18 Power Switch (PWRBTN) 41 Chassis Fan Connector (CHA_FAN2)

19 Dr. Debug (LED) 42 XFire Power Connector (CROSS_FIRE_PWR1)

20 Reset Switch (RSTBTN) 43 Chassis Fan Connector (CHA_FAN3)

21 Chassis Speaker Header (SPEAKER1)

SOCKET FM2

AMD

A85X

(Hudson-D4)

Chipset

ATXPWR1

DDR3_ A1 (64 bi t, 240-pin modul e)

DDR3_ A2 (64 bi t, 240-pin modul e)

DDR3_ B1 (64 bi t, 240-pin modul e)

DDR3_ B2 (64 bi t, 240-pin modul e)

SATA3_1 _2

SATA3_5

SATA3_3 _4SATA3_7 _8

CPU_ FAN1

CPU_ FAN2

PWR_ FAN1

64M b

BIO S

PCIE4

PCIE2

PCIE5

PCIE1

PCIE3

PCI2

PCI1

AUDI O

CODE C

HD_A UDIO1

HDMI _SPDIF1

CLRC MOS1

USB3 _5_6

SPEA KER1

CHA_ FAN1

HDLED R ESET

PLED PWRBT N

PANEL 1

CIR1

USB_ 4_5

USB_ 2_3

USB_ 0_1

FM2A85X Extreme6

Fast RAM

Fast LAN

Fast USB

Front US B 3.0

RoHS

DX11

DDR3 26 00+

Dual Graphics

Top:

RJ- 45

USB 3.0

T: USB 3

B: U SB4

USB 2.0

T: USB 6

B: U SB7

eSATA

DVI1

VGA1

USB 3. 0

T: USB1

B: USB 2

Ps2

Key boar d

/Mo use

PLED 1

CHA_ FAN3

CHA_ FAN2

Super

I/ O

CMOS

BATTER Y

IR1

CI1

DP_1

HDMI

Clr

CMO S

CROS S_FIRE _PWR1

Dr.

De b ug

RES ET

POW ER

COM1

ATX12V 1

3031

ErP/EuP Ready

Top:

CTR BAS S

Cen ter:

REA R S PK

Bot tom:

Opt ical

SPD IF

Top:

LIN E I N

Cen ter:

FRO NT

Bot tom:

MIC IN

LAN

1.5 I/O Panel

** There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

Off No Link Off 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

1 PS/2 Mouse/Keyboard Port (Green/Purple) *** 10 Front Speaker (Lime)

2 D-Sub Port (VGA1) 11 Microphone (Pink)

3 DisplayPort (DP_1) 12 USB 3.0 Ports (USB3_3_4)

* 4 USB 2.0 Ports (USB_6_7) **** 13 eSATA3 Connector (SATA3_6)

** 5 LAN RJ-45 Port 14 Clear CMOS Switch (CLRCBTN)

6 Central / Bass (Orange) 15 HDMI Port (HDMI1)

7 Rear Speaker (Black) 16 DVI-D Port (DVI1)

8 Optical SPDIF Out Port 17 USB 3.0 Ports (USB3_1_2)

9 Line In (Light Blue)

LAN Port

ACT/LINK

LED

SPEED

LED

***

If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”.

See the table below for connection details in accordance with the type of speaker you use.

TABLE for Audio Output Connection

Audio Output Channels Front Speaker Rear Speaker Central / Bass Line In or

(No. 10) (No. 7) (No. 6) Side Speaker

(No. 9)

2 V -- -- --

4 V V -- --

6 V V V --

8 V V V V

* It is recommended to install the USB Keyboard/Mouse cable to USB 2.0 ports (USB_7_9)

instead of USB 3.0 ports.

To enable Multi-Streaming function, you need to connect a front panel audio cable to the front

panel audio header. After restarting your computer, you will nd “Mixer” tool on your system.

Please select “Mixer ToolBox” , click “Enable playback multi-streaming”, and click “ok”.

Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are allowed to select “Realtek HDA Pri-

mary output” to use Rear Speaker, Central/Bass, and Front Speaker, or select “Realtek HDA

Audio 2nd output” to use front panel audio.

**** eSATA3 connector supports SATA Gen3 in cable 1M.

2. Installation

This is an ATX form factor motherboard. Before you install the motherboard, study

the conguration of your chassis to ensure that the motherboard ts into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard

components or change any motherboard settings.

Before you install or remove any component, ensure that the

power is switched off or the power cord is detached from the

power supply. Failure to do so may cause severe damage to the

motherboard, peripherals, and/or components.

1. Unplug the power cord from the wall socket before touching any

component.

2. To avoid damaging the motherboard components due to static elec-

tricity, NEVER place your motherboard directly on the carpet or the

like. Also remember to use a grounded wrist strap or touch a safety

grounded object before you handle components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded anti-

static pad or in the bag that comes with the component.

5. When placing screws into the screw holes to secure the mother-

board to the chassis, please do not over-tighten the screws! Doing

so may damage the motherboard.

2.1 CPU Installation

Step 1. Unlock the socket by lifting the lever up to a 90

angle.

Step 2. Position the CPU directly above the socket such that the CPU corner with

the golden triangle matches the socket corner with a small triangle.

Step 3. Carefully insert the CPU into the socket until it ts in place.

The CPU ts only in one correct orientation. DO NOT force the CPU

into the socket to avoid bending of the pins.

Step 4. When the CPU is in place, press it rmly on the socket while you push

down the socket lever to secure the CPU. The lever clicks on the side tab

to indicate that it is locked.

2.2 Installation of CPU Fan and Heatsink

After you install the CPU into this motherboard, it is necessary to install a

larger heatsink and cooling fan to dissipate heat. You also need to spray

thermal grease between the CPU and the heatsink to improve heat dis-

sipation. Make sure that the CPU and the heatsink are securely fastened

and in good contact with each other. Then connect the CPU fan to the

CPU FAN connector (CPU_FAN1, see Page 14, No. 5 or CPU_FAN2,

see Page 14, No. 6). For proper installation, please kindly refer to the

instruction manuals of the CPU fan and the heatsink.

STEP 1:

Lift Up The Socket Lever

STEP 2 / STEP 3:

Match The CPU Golden Triangle

To The Socket Corner Small

Triangle

STEP 4:

Push Down And Lock

The Socket Lever

CPU Golden Triangle

Lever 90° Up

Socket Corner Small

Triangle

2.3 Installation of Memory Modules (DIMM)

This motherboard provides four 240-pin DDR3 (Double Data Rate 3) DIMM

slots, and supports Dual Channel Memory Technology. For dual channel con-

guration, you always need to install identical (the same brand, speed, size

and chip-type) DDR3 DIMM pair in the slots of the same color. In other words,

you have to install identical DDR3 DIMM pair in Dual Channel A (DDR3_A1

and DDR3_B1; see p.14 No.7) or identical DDR3 DIMM pair in Dual Channel

B (DDR3_A2 and DDR3_B2; see p.14 No.8), so that Dual Channel Memory

Technology can be activated. This motherboard also allows you to install four

DDR3 DIMMs for dual channel conguration, and please install identical DDR3

DIMMs in all four slots. You may refer to the Dual Channel Memory Congura-

tion Table below.

Dual Channel Memory Congurations

DDR3_A1 DDR3_A2 DDR3_B1 DDR3_B2

(1) Populated - Populated -

(2) - Populated - Populated

(3)* Populated Populated Populated Populated

For the conguration (3), please install identical DDR3 DIMMs in all four

slots.

1. If you want to install two memory modules, for optimal compatibility

and reliability, it is recommended to install them in the slots: DDR3_

A1 and DDR3_B1, or DDR3_A2 and DDR3_B2.

2. If only one memory module or three memory modules are installed

in the DDR3 DIMM slots on this motherboard, it is unable to activate

the Dual Channel Memory Technology.

3. If a pair of memory modules is NOT installed in the same Dual

Channel, for example, installing a pair of memory modules in

DDR3_A1 and DDR3_A2, it is unable to activate the Dual Channel

Memory Technology .

4. It is not allowed to install a DDR or DDR2 memory module into

DDR3 slot; otherwise, this motherboard and DIMM may be dam-

aged.

5. If you adopt DDR3 2600/2400/2133/1866/1600 memory modules

on this motherboard, it is recommended to install them on DDR3_

A2 and DDR3_B2 slots.

notch

break

notch

break

Installing a DIMM

Please make sure to disconnect power supply before adding or

removing DIMMs or the system components.

Step 1. Unlock a DIMM slot by pressing the retaining clips outward.

Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the

break on the slot.

The DIMM only ts in one correct orientation. It will cause permanent

damage to the motherboard and the DIMM if you force the DIMM into

the slot at incorrect orientation.

Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends

fully snap back in place and the DIMM is properly seated.

Page is loading ...

ASROCK FM2A85X Extreme6 User manual

Brand: ASROCK

Model: FM2A85X Extreme6

Category: Motherboards

Type: User manual

Download PDF

report

ASROCK FM2A85X Extreme6 User manual

ASROCK FM2A85X Extreme6 User manual

Related papers

Other documents