D-Link DHP-300 - PowerLine HD EN Adapter Bridge User manual

Category
Routers
Type
User manual

This manual is also suitable for

2D-Link DHP-W306AV User Manual
Table of Contents

Package Contents ...................................................4
System Requirements ............................................. 5
Introduction ..............................................................6
Hardware Overview ................................................. 8
Connections ....................................................... 8
Side ....................................................................9
LEDs ................................................................10

Connecting the Powerline AV Adapter .................. 11
Wireless Installation Considerations ...................... 12
 
Encryption Button Usage .......................................13
Conguring a Powerline Network .......................... 14
Connecting two Powerline AV devices for the rst
time ..................................................................14
Connecting a Powerline AV device to an existing
Powerline network ........................................... 14
 
PLC Settings .......................................................... 15
Wireless .................................................................18
Wireless Setup Wizard .................................... 19
Add Wireless Device with WPS ................... 24
Wireless Setup ............................................. 26
LAN Setup - DHCP ...................................... 28
LAN Setup - Static IP ................................... 29
MAC Address Filter ...................................... 30
Advanced Wireless ...................................... 31
User Limit ..................................................... 32
Admin ...........................................................33
System ......................................................... 34
Language Pack ............................................ 35
Firmware ...................................................... 35
Time ............................................................. 36
Schedules .................................................... 37
Device Info ................................................... 38
Logs ............................................................. 39
Statistics ....................................................... 40
Wireless ....................................................... 41
Help .............................................................. 42

What is WEP? .......................................................43
What is WPA? .......................................................44
Congure WEP ......................................................45
Congure WPA/WPA2 Personal ...........................46
Congure WPA/WPA2 Enterprise ......................... 47
 
Using Windows
®
7 ................................................. 48
Congure WPS ......................................................51
Table of Contents
3D-Link DHP-W306AV User Manual
Table of Contents
 
Using Windows Vista
®
.......................................... 55
Congure WEP ......................................................57
Congure WPA-PSK .............................................58
 
Using Windows
®
XP ............................................... 59
Congure WEP ......................................................60
Congure WPA-PSK .............................................62
 
 
What is Wireless? ..................................................68
Tips ........................................................................ 70
Wireless Modes ..................................................... 71
 
Check your IP address ..........................................72
Statically Assign an IP address ............................. 73
 
4D-Link DHP-W306AV User Manual
Section 1 - Product Overview
Product Overview




Package Contents
5D-Link DHP-W306AV User Manual
Section 1 - Product Overview

• IEEE 802.11n or 802.11g wireless clients
• 10/100 Ethernet clients



• Windows
®
, Macintosh
®
, or Linux-based operating system
• An installed Ethernet adapter

• Internet Explorer 6.0 or higher
• Firefox 3.0 or higher
• Safari 3.0 or higher
• Chrome 2.0 or higher

 Make sure you have the latest version of Java installed.
Visit www.java.com to download the latest version.



• Windows
®
XP with Service Pack 2 / Vista
®
/ Windows 7
• An installed Ethernet adapter
• CD-ROM drive
System Requirements
6D-Link DHP-W306AV User Manual
Section 1 - Product Overview
Introduction
The DHP-W306AV allows you to connect both wired and wireless computers, high-denition TVs, networking devices,
and gaming consoles using the most pervasive medium in your home - the electrical wiring. Share Internet connections
and experience smooth le transfers, streaming multimedia, online gaming and more. The Powerline AV Wireless N
Extender features easy plug-and-play installation and can be connected to any Ethernet-enabled device.
The Powerline AV Wireless N Extender incorporates the latest technology to deliver up to 200 Mbps over a home’s
existing electrical wiring. This fast transmission speed provides ample bandwidth suitable for streaming high-quality
video HDTV signals while simultaneously providing high-speed Internet access throughout the home. With Quality of
Service (QoS) support, the performance of applications which require real-time communication, such as VoIP phone
calls and multiplayer online games, will not be compromised even while streaming Internet TV and music.
7D-Link DHP-W306AV User Manual
Section 1 - Product Overview

The D-Link DHP-W306AV Powerline AV Wireless N Extender, compliant with the Powerline AV standard, uses your home’s
existing electrical wiring to create a network or extend your existing network.
1
It turns every power outlet into a possible network
connection to access digital media devices, game consoles, print servers, computers, and network storage devices throughout
your home. Additionally, Wireless N provides high speed transfers without the need for unsightly network cables.

The Wireless N technology incorporated into the DHP-W306AV offers increased speed and range over standard 802.11g/b.
Initial wireless setup can be accomplished quickly, thanks to a convenient WPS button atop the device. WEP, WPA, and WPA2
encryption keep your network trafc safe and secure.

The DHP-W306AV is capable of delivering data transfer rates of up to 200 Mbps.
2
This rapid transmission speed makes it
ideal for bandwidth-intensive applications, guaranteeing smooth HD video streaming, VoIP calls, and lag-free online gaming
experiences. In addition, it prioritizes Internet trafc, ensuring that multimedia applications do not experience glitches while web
surng and downloads are in progress. This device provides ample network bandwidth, enabling digital home consumers to tap
into existing electrical wiring for high-quality multimedia streaming.

The DHP-W306AV plugs directly into a power outlet, and does not require any additional cables. Extend your home network by
connecting multiple devices in the farthest corners of your home via Ethernet cable or Wireless N. For convenient setup, wired
or wireless encryption keys can be quickly congured with the push of a button on top of the device. The adapter implements
128-bit AES data encryption to protect the network from unauthorized wiretapping. With hassle-free plug and play installation,
the DHP-W306AV is an ideal solution to create a wall-to-wall home network.
1
Power outlets and electrical wiring must all be part of the same electrical system. Certain electrical conditions in your home, such as wiring condition and conguration,
may affect the performance of this product. Additional D-Link Powerline AV adapters are required to add new devices to the network. A minimum of two D-Link
Powerline AV Network Adapters are required to create a network. Connecting this product to a power strip with a surge protector may adversely affect the performance
of this product. For best results, plug the adapter directly into a wall outlet.
2
Maximum throughput based on theoretical transmission PHY rate. Actual data throughput will vary. Network conditions and environmental factors, including volume
of trafc and network overhead, may lower actual data throughput rate. Interference from devices that emit electrical noise, such as vacuum cleaners and hair dryers,
may adversely affect the performance of this product. This product may interfere with devices such as lighting systems that have a dimmer switch or a touch-sensitive
on/off feature, shortwave radios, or other Powerline devices that do not follow the HomePlug standard.
8D-Link DHP-W306AV User Manual
Section 1 - Product Overview
Hardware Overview
Connections

Connects to Digital Media Devices,
PCs, Game Consoles, Network Storage
Devices

Turns the device on or off.
ON: OFF: (active / inactive)
9D-Link DHP-W306AV User Manual
Section 1 - Product Overview
Hardware Overview
Side

Push this button to establish a
secure powerline network with
other Powerline AV devices.

Press to start the WPS process. You
will have 120 seconds to start the WPS
process on another wireless device.

When enabling WPS, the light will blink
during broadcast. Once connected,
the LED will remain lit 5 seconds and
then will turn off. The LED will start
blinking after the Encryption button
is pushed. The LED will turn off once
the Powerline AV is connected to a
Powerline network.

Press and hold to reset the
device back to the factory
default settings.
10D-Link DHP-W306AV User Manual
Section 1 - Product Overview
Hardware Overview
LEDs

A solid light indicates a proper
connection to the power supply.

A solid light indicates that the wireless
segment is ready. This LED blinks
during wireless data transmission.

A solid light indicates a connection to
an Ethernet-enabled device. This LED
blinks during data transmission.

A solid light indicates that a powerline
connection is established. The LED will
blink quickly when data is transmitted
to or from another Powerline unit.
11D-Link DHP-W306AV User Manual
Section 2 - Installation
Installation
Connecting the Powerline AV Adapter
It is easy to connect the DHP-W306AV simply by performing the
following instructions:
1. Plug the DHP-W306AV into the wall outlet/socket.
2. Connect one end of the supplied CAT5 Ethernet cable to the
Ethernet port on the DHP-W306AV and the other end of the cable
to the device’s Ethernet interface. You can also enable wireless
to connect to the WiFi devices using WPS.
12D-Link DHP-W306AV User Manual
Section 2 - Installation
Wireless Installation Considerations
The D-Link wireless access point lets you access your network using a wireless connection from virtually anywhere
within the operating range of your wireless network. Keep in mind that the number, thickness and location of walls,
ceilings, or other objects that the wireless signals must pass through may limit the range. Typical ranges vary depending
on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing
wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link access point and other network devices to a
minimum. Each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position
your devices so that the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a
45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet
(14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead
of at an angle) for better reception.
3. Building materials make a difference. A solid metal door or aluminum studs may have a negative effect
on range. Try to position access points, wireless access points, and computers so that the signal passes
through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation,
water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that
generate RF noise.
5. If you are using 2.4GHz cordless phones or wireless products such as ceiling fans, lights, and home
security systems, your wireless connection may degrade dramatically or drop completely. Make sure
your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a
signal even if the phone is not in use.
13D-Link DHP-W306AV User Manual
Section 2 - Installation
Powerline Network - Quick Setup
Encryption Button Usage
The Eny Button is used to add a Powerline AV device to a Powerline network. You can allow the DHP-W306AV to join
a network by pressing the Eny Button to toggle it to the Broadcast state or Join state.
The Eny Button has 3 different trigger states:
 Enables the DHP-W306AV to provide information for another Powerline AV device
to join its Powerline network (works even if it is the only device existing within the network group). The
rst Powerline device will use this state when the Eny Button is pressed.
  This allows an ungrouped Powerline AV device to join an existing Powerline network.
Powerline devices added after the rst device will be in the Join State when the Eny Button is pressed.
 Hold down the Eny Button for more than 10 seconds to detach the device from its
network group.
14D-Link DHP-W306AV User Manual
Section 2 - Installation
Configuring a Powerline Network
Connecting two Powerline AV devices for the first time
To initially connect the DHP-W306AV to another Powerline AV device and create a network:
1. Plug a Powerline device into a power outlet. Press the Eny button for 1 to 3 seconds. The Eny LED
should start to blink.
2. Plug the other Powerline device into a power outlet. Press the Eny button on this Powerline device for
1 to 3 seconds.
3. Wait for both devices to reboot (all LEDs will turn off and on). When the Powerline AV LEDs on both
devices are steadily lit, the two devices will be networked together.
Connecting a Powerline AV device to an existing Powerline network
To add a DHP-W306AV if you already have an existing network with 2 or more Powerline devices:
1. Press the Eny button on the DHP-W306AV for more than 10 seconds to make sure it is not connected
to any other Powerline network.
2. Press the Eny button of any device already in your Powerline network for 1 to 3 seconds. The Eny LED
should start to blink.
3. Press the Eny button on the DHP-W306AV for 1 to 3 seconds. The Power LED should blink.
4. Wait for the devices to reboot (all LEDs will turn off and on). When the Powerline AV LEDs on all devices
are steadily lit, the DHP-W306AV will be connected to the existing network.
15D-Link DHP-W306AV User Manual
Section 3 - Configuration
Configuration
PLC Settings
This section will show you how to congure your new D-Link Powerline AV using the web-based conguration utility.
16D-Link DHP-W306AV User Manual
Section 3 - Configuration
Network Name:
Public Network
Name:
Private Network
Name:
Add Member:
Scan:
Device Name:
MAC Address:
Password:
You can set the name of your network and to make
it either public or private. Make sure the Network
Name of all of the devices within your Powerline
network is the same.
Select this option if you would like to make your
powerline network public with the default Network
Name of “HomePlugAV”. Since this is a commonly
used Network Name, it is less secure than a private
Network Name.
Select this option if you wish to make your powerline
network more secure by using a private Network
Name. Type the name of your private Powerline
network in the eld.
This section lets you add new Powerline AV devices
to your Powerline network. To add a new device, give
it a  and enter its , then click
. When you add a device it is given the current
Network Name.
Scan for new Powerline devices.
Type a name you wish to use to identify a specic
Powerline AV device. For example, “Jack’s room”.
You can nd the MAC address printed on the back
of your device.
The is used to verify that you are
authorized to perform changes on a device. You can
nd the  printed on the back of your device.
17D-Link DHP-W306AV User Manual
Section 3 - Configuration
Member List:
Link Rate:
Status:
QoS Setting:
This section provides information on the Powerline
AV devices in your Powerline network, or any devices
that were previously connected but it are currently
disconnected.
Displays the device’s current data rate in Mbps.
This eld shows the status of the device. If the
eld displays the word , then the device
is connected to your Powerline network. If the eld
displays the word  then the device has
been added to the network but it is not ready. Please
check its password and make sure the device is
powered on.
You can congure your Powerline AV devices to give
priority to powerline network trafc according to its
unique .
18D-Link DHP-W306AV User Manual
Section 3 - Configuration
Wireless
If you wish to change the default settings or optimize
the performance of the DHP-W306AV, you may use
the web-based conguration utility.
To access the conguration utility, open a web browser
such as Internet Explorer and enter either 
or  in the address eld.
Type  as the User Name and then enter your
password. Leave the password blank by default.
If you receive a “Page Cannot be Displayed error,
please refer to the  section on page
64 for assistance.
Connect an Ethernet cable from the Ethernet port on the DHP-W306AV to a computer for conguration.
http://dlinkap
19D-Link DHP-W306AV User Manual
Section 3 - Configuration
Click  to congure
your access point and skip to the next page.
To set up your wireless network, click 
 and skip to page 24.
If you would like to enter your settings without running
the wizard, click  on the left side and
skip to page 26.
Wireless Setup Wizard
20D-Link DHP-W306AV User Manual
Section 3 - Configuration
Enter the Device Name of the AP and click 
to continue. This is the NetBIOS name for the AP.
Changing the Device Name is recommended if there
is more than one D-Link device within the same
wireless network.
This Wizard is designed to assist you in conguring your DHP-W306AV as an access point.
If you would like to change the admin account
password, enter a new password and click .
Changing the password is strongly recommended.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74

D-Link DHP-300 - PowerLine HD EN Adapter Bridge User manual

Category
Routers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI