2. Computers & electronics
  3. TVs & monitors
  4. Television antennas
  5. AmerTac
  6. VN1ANTA20
VN1ANTA20

AmerTac VN1ANTA20 User manual

  • Hello! I am an AI chatbot trained to assist you with the AmerTac VN1ANTA20 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
HDTV
Designed For
Questions?, ¿Preguntas? 201.661.9944
©2010 AmerTac™
Saddle River Executive Centre
One Route 17 South
Saddle River, NJ 07458
www.amertac.com
Made in China/Fabriqué en Chine/Hecho en China
I10-0000-A
VHF/UHF
TV Antenna
Digital and Analog Compatible
Amplifier boosts signal strength for increased picture quality
Receives local HD and Digital TV broadcast signals for free
Adjustable VHF dipoles extend up to 39" to improve reception for channels 2-13
UHF loop for improved reception of channels 14-69
Blue power indicator light
High gain and low noise booster
Adjustable wide band amplifier
Receives horizontal and vertical signals
Includes power adapter and 58" coax cable
VN1ANTA20
Zenith is a registered trademark of Zenith Electronics LLC and used under license.
Zenith est une marque de commerce déposée de Zenith Electronics LLC et utilisée sous licence.
Zenith es una marca registrada de Zenith Electronics LLC y se utiliza bajo licencia.
Installation
Note:
Do not use antenna during thunderstorms. Turn off power.
Turn off power when not in use.
If antenna is not receiving correctly, try placing in different position.
Reception Frequency: VHF (47
~
230MHz) / UHF (470
~860MHz)
BLOWN-UP Gain:
VHF (15db) / UHF (20db)
Impedance: 75 Ohm
VSWR: 2
Power Connection
- Plug AC adapter into DC12V jack on back of antenna
Connect to Analog TV
- Connect coaxial cable connector to TV’s RF input.
Turning Antenna On/Gain Adjustment
- Turn antenna ON by rotating Min/Max switch.
Adjust Gain Control for best reception
Adjust Antenna
-Rotate and adjust hoop to improve UHF reception
-Extend and move dipoles to improve VHF reception
1
2
3
4
To TV
AC Adapter
Compatible con señales digitales y análogas
El amplificador refuerza la potencia de la señal para optimizar
la calidad de la imagen
Recibe señales de transmisión de TV digital y de alta definición
locales gratis
Los dipolos VHF ajustables se extienden hasta 39 pulg. para
mejorar la recepción de los canales 2 a 13
Bucle UHF para mejorar la recepción de los canales 14 a 69
Luz indicadora de potencia azul
Reforzador de alta ganancia y ruido bajo
Amplificador de banda ancha ajustable
Recibe señales horizontales y verticales
Incluye adaptador de potencia y cable coaxial de 58 pulg.
VHF/UHF
Antena de TV
HDTV
Diseñada para
TVHD
Conçue pour
VHF/UHF
Antenne TV
Compatibilité analogique et numérique
L’amplificateur augmente la force du signal pour une plus
grande qualité de l’image
Réception gratuite de signaux de diffusion TV numérique
et HD locaux
Doublets VHF réglables et extensibles jusqu’à 1 m (39 po) pour
améliorer la réception des chaînes 2 à 13
Boucle UHF pour améliorer la réception des chaînes 14 à 69
Voyant d’alimentation bleu
Amplificateur à gain élevé et faible bruit
Amplificateur large bande réglable
Réception de signaux horizontaux et verticaux
Inclut un adaptateur d’alimentation et un câble coaxial
de 1,4 m (58 po)
VN1ANTA20
Installation/Installation
Note:
Do not use antenna during thunderstorms. Turn off power.
Turn off power when not in use.
If antenna is not receiving correctly, try placing in different position.
Note:
Do not use antenna during thunderstorms. Turn off power.
Turn off power when not in use.
If antenna is not receiving correctly, try placing in different position.
Power Connection
- Plug AC adapter into DC12V jack on back of antenna
Connect to Analog TV
- Connect coaxial cable connector to TV’s RF input.
Turning Antenna On/Gain Adjustment
- Turn antenna ON by rotating Min/Max switch.
Adjust Gain Control for best reception
Adjust Antenna
-Rotate and adjust hoop to improve UHF reception
-Extend and move dipoles to improve VHF reception
1
2
3
4
To TV
AC Adapter
Power Connection
- Plug AC adapter into DC12V jack on back of antenna
Connect to Analog TV
- Connect coaxial cable connector to TV’s RF input.
Turning Antenna On/Gain Adjustment
- Turn antenna ON by rotating Min/Max switch.
Adjust Gain Control for best reception
Adjust Antenna
-Rotate and adjust hoop to improve UHF reception
-Extend and move dipoles to improve VHF reception
Reception Frequency:
VHF (47
~
230MHz) / UHF (470
~860MHz)
BLOWN-UP Gain:
VHF (15db) / UHF (20db)
Impedance: 75 Ohm
VSWR: 2
Reception Frequency:
VHF (47
~
230MHz) / UHF (470
~860MHz)
BLOWN-UP Gain:
VHF (15db) / UHF (20db)
Impedance: 75 Ohm
VSWR: 2
/