Antsig AP536 User manual

Brand
Antsig
Model
AP536
Category
Network antennas
Type
User manual

Antsig AP536 is a compact and stylish antenna designed for terrestrial broadcasting reception. With a built-in amplifier and a wide frequency range covering VHF and UHF bands, it provides excellent signal reception for your TV or digital set-top box. The multi-directional base allows for easy adjustment to optimize signal strength, while the water-resistant and UV-protected housing ensures durability in outdoor conditions. Enjoy enhanced TV viewing with the Antsig AP536 antenna.

Antsig AP536 is a compact and stylish antenna designed for terrestrial broadcasting reception. With a built-in amplifier and a wide frequency range covering VHF and UHF bands, it provides excellent signal reception for your TV or digital set-top box. The multi-directional base allows for easy adjustment to optimize signal strength, while the water-resistant and UV-protected housing ensures durability in outdoor conditions. Enjoy enhanced TV viewing with the Antsig AP536 antenna.

USER GUIDE
Thanks for purchasing this AP536 Outdoor/Indoor Antenna.
Before installation,
Please read this manual carefully and keep this manual
for further information.
INTRODUCTION
AP536 is especially designed for terrestrial broadcasting reception.
With state-of-art low noise amplifier technology and circuitry, it will
provide best reception. It has compact and stylish housing, and will
accompany your TV or digital Set Top Box (STB).
With UV protected housing and water resistant sealing,
AP536 series antenna can be installed on a wall, window-shelter.
The special multi-directional base mechanism, allows adjustment to
any direction to get the best reception
FEATURES:
• CompactandStylishdesign
• UHF470~870MHz
• VHF47~230MHz
• Gain20±3dB
• Lownoiseampliertechnology
• HighDirectionality
• Water-proofandanti-UVhousing
Powering method:
ViaDCadaptor9V@100mA(intoDCinputsocket)
INSTALLATION
Under Eave Antenna with Built In Amplifier
AP536
ACAdaptor
STBorDigitalTV
1.5mFlylead
RFOutRFIn
10mCoaxialcable
AP536 Antenna
AP536 Instructions.indd 1 17/11/09 2:38:22 PM
PACKAGE CONTENTS
Please check the content before installation
1. AP536mainunit
2. Multi-directionalbase
3. Wall mounting package (plastic insert X3, screw X3)
4. 10metreCoaxialcable(FmaletoFmale)X1
5. 1.5metreCoaxialcable(FmaletoFmale)X1
5. ACadaptorX1
6. Instruction sheet
Notes:
Forthebestreception,Pleasecheckthefollowingconditions
1. Farawaythesourceofinterference:Farawaythosebigpowerconsumptiondevices,suchasair
conditioner, elevator, hair dryer and microwave oven. Etc
2. InstalledAshighaspossible:Incaseofterrestrialreception,iftherearesomeinterceptions
between Antenna and transmission tower, it will cause the signal loss temporary.
So if the antenna is installed as high as possible, this interference will be reduced.
ANTSIG an Arlec Consumer Products Brand
For all Sales Phone (03) 9727 8860 Fax 1300 360 650
CPIN1086
Frequency range : VHF 47~230MHz
UHF 470~870MHz
Antenna gain VHF : 20dB
Output resistance : 75Ω
Polarization method : Horizontal
Power supply : 9V DC, 100mA
Cable length : 1.5 and 10 metre
AP536 Instructions.indd 2 17/11/09 2:38:22 PM
  • Page 1 1
  • Page 2 2

Antsig AP536 User manual

Brand
Antsig
Model
AP536
Category
Network antennas
Type
User manual

Antsig AP536 is a compact and stylish antenna designed for terrestrial broadcasting reception. With a built-in amplifier and a wide frequency range covering VHF and UHF bands, it provides excellent signal reception for your TV or digital set-top box. The multi-directional base allows for easy adjustment to optimize signal strength, while the water-resistant and UV-protected housing ensures durability in outdoor conditions. Enjoy enhanced TV viewing with the Antsig AP536 antenna.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents