EXSYS 15.06.1032 Datasheet

Category
Interface cards/adapters
Type
Datasheet

EXSYS 15.06.1032 is a high-performance PCI parallel card that provides one SPP/EPP/ECP port. It's designed for PCs, thin clients, or servers to expand LPT ports via PCI or PCI-X Bus. It supports data transfer rates up to 2MB/s and is compatible with motherboards with 5V and 3.3V. No IRQ and I/O address conflict problems. Ideal for plotters, measuring instruments, ZIP drives, laser printers, and scanners.

EXSYS 15.06.1032 is a high-performance PCI parallel card that provides one SPP/EPP/ECP port. It's designed for PCs, thin clients, or servers to expand LPT ports via PCI or PCI-X Bus. It supports data transfer rates up to 2MB/s and is compatible with motherboards with 5V and 3.3V. No IRQ and I/O address conflict problems. Ideal for plotters, measuring instruments, ZIP drives, laser printers, and scanners.

PCI I/O Interface
EX
-
41211
LowProfile 1P Parallel SPP/EPP/ECP PCI 32
-
Bit Karte
Beschreibung :
Die EX
-
41211 LowProfile PCI Parallel Karte stellt einen Parallel SPP/EPP/ECP High Performance Ausgang zur Verfügung. Er ist entw
i-
ckelt worden um einen weiteren Parallele Ausgang für PCs, kleine Workstations oder Server über den PCI Bus zu erweitern. Die
EX
-
41211 kann in schmale Gehäuse bis zu einer maximaler Bauhöhe von 8cm eingesetzt werden.
Merkmale :
Universal PCI 32
-
Bit Parallel Karte mit einem Anschluss
Schnittstelle: SPP (Standard Parallel Port ), EPP (Enhanced Parallel Port), ECP (Enhanced Capacity Port)
I/O Adressen: wird vom Betriebs System vergeben
Interrupt: wird vom System BIOS vergeben mit Interrupt Sharing
Keine Jumper Einstellung erforderlich (nicht möglich)
Unterstützt Motherboard mit 5V und 3.3V
Chip
-
Set :
Oxford OX12PCI840
Datentransfer
-
Rate :
2Mbyte/Sek.
Anschlüsse :
1 x 25 Pin D
-
SUB Parallel Buchse
Betriebstemperatur :
Luftfeuchtigkeit :
0 bis 55
0
C (32 bis 131
0
F)
5 bis 95%
Abmessung / Gewicht :
120 x 63 mm / 100g
Lieferumfang :
EX
-
41211
Treiber CD
Handbuch
Hardwaresysteme :
PCI 32
-
Bit und PCI
-
X 64
-
Bit Bus
LowProfile 1P Parallel SPP/EPP/ECP PCI 32
-Bit card
Description :
The EX
-
41211 LowProfile PCI parallel adapter provides one SPP/EPP/ECP high performance ports. It is designed for PC´s, thin clie
nts or
server to provide instant LPT port expansion via the PCI
or PCI
-
X Bus.
The card is fully Universal PCI Plug
-
and
-
Play compatible and no
IRQ and I/O address conflict problems. The EX
-
41211 can be use for a small computer chassis of maximum 8cm high.
Feature :
Universal PCI 32
-
Bit Parallel card with one port
Interface: SPP (Standard Parallel Port),
EPP (Enhanced Parallel Port), ECP (Enhanced Capacity Port)
I/O addresses: Setting from the operating system
Interrupt: Setting from the System BIOS with Interrupt Sharing
No Jumper setting
Support Motherboard with 5V and 3.3V
Chip
-
Set :
Oxford OX12PCI840
Data transfer rate :
2Mbyte/Sec.
Connectors :
1 x 25 pin D
-
SUB parallel female connector
Operating Temperature :
Humidity :
0 to 55
0
C (32 to 131
0
F)
5 to 95%
Size / Weight :
120 x 63 mm / 100g
Packaging contents :
EX
-
41211
Driver CD
Manual
Hardware system :
PCI 32
-
Bit and PCI
-
X 64
-
Bit Bus
Anwendung/Application :
Operating System (OS):
Geprüft/Approved:
Verpackung/Packing:
Scanner
Laser Printer
ZIP Drives
Messgeräte
Measuring instruments
Plotter
CE
WEEE Reg.Nr.:
DE97424562
FC
C
  • Page 1 1

EXSYS 15.06.1032 Datasheet

Category
Interface cards/adapters
Type
Datasheet

EXSYS 15.06.1032 is a high-performance PCI parallel card that provides one SPP/EPP/ECP port. It's designed for PCs, thin clients, or servers to expand LPT ports via PCI or PCI-X Bus. It supports data transfer rates up to 2MB/s and is compatible with motherboards with 5V and 3.3V. No IRQ and I/O address conflict problems. Ideal for plotters, measuring instruments, ZIP drives, laser printers, and scanners.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages