Aaeon HSB-800I-A11 User manual

Last Updated: January 7, 2021

HSB-800I-A11

Half-Sized ISA SBC

User’s Manual 1

st

Ed

Preface II

Half-Sized ISA SBC HSB-800I-A11

Copyright Notice

This document is copyrighted, 2021. All rights are reserved. The original manufacturer

reserves the right to make improvements to the products described in this manual at

any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted in any

form or by any means without the prior written permission of the original

manufacturer. Information provided in this manual is intended to be accurate and

reliable. However, the original manufacturer assumes no responsibility for its use, or for

any infringements upon the rights of third parties that may result from its use.

The material in this document is for product information only and is subject to change

without notice. While reasonable efforts have been made in the preparation of this

document to assure its accuracy, AAEON assumes no liabilities resulting from errors or

omissions in this document, or from the use of the information contained herein.

AAEON reserves the right to make changes in the product design without notice to its

users.

Preface III

Half-Sized ISA SBC HSB-800I-A11

Acknowledgement

All other products’ name or trademarks are properties of their respective owners.

⚫ Microsoft Windows is a registered trademark of Microsoft Corp.

⚫ AMD and AMD Geode™ are registered trademarks of Advanced Micro Devices,

Inc.

⚫ ITE is a trademark of Integrated Technology Express, Inc.

⚫ IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines

Corporation.

⚫ CompactFlash™ is a registered trademark of the CompactFlash Association

All other product names or trademarks are properties of their respective owners. The

publisher of this document neither assumes nor implies ownership of any trademarks

not herein listed.

Preface IV

Half-Sized ISA SBC HSB-800I-A11

Packing List

Before setting up your product, please make sure the following items have been

shipped:

Item

Description

Quantity

HSB-800I-A11

Half-Sized Board

1

1701260307

Flat Cable.9P/DB9P MALE&25P DB25P FEMALE.10P

2mm&26P 2mm/IDC NO FOLD.30cm.W/BKT

1

1701400453

Cable.40P 2.54mm IDC W/Nose W/Fold.40P 2.54mm

IDC W/Nose W/Fold.45cm.Blue ATA-100

1

1700060192

Cable.6P-6P-6P.19cm.IVORY PS2/KB&Mouse

1

1701340704

Flat Cable.34P.70cm.GRAY for FDD

1

1703030501

Wire.3P 2.5mm Housing.3P 2.5mm Housing.50cm

1

170910020A

USB Cable.USB*2.5P 2.mm

Housing*2.20cm.W/Bracket

1

1709140302

Cable.Phone Jack*3.t0 14P 2.54mm Housing.DB9P(M)

10P 2.0mm IDC.4P 2.54mm Housing.30cm.W/Backet

1

1701200301

Flat Cable.9P DB9P MALE.10P 2.0mm

Pitch*2.30cm.IDC NO FOLD.W/BRACKET

1

If any of these items are missing or damaged, please contact your distributor or sales

representative immediately.

Preface V

Half-Sized ISA SBC HSB-800I-A11

About this Document

This User’s Manual contains all the essential information, such as detailed descriptions

and explanations on the product’s hardware and software features (if any), its

specifications, dimensions, jumper/connector settings/definitions, and driver installation

instructions (if any), to facilitate users in setting up their product.

Users may refer to the product page at AAEON.com for the latest version of this

document.

Preface VI

Half-Sized ISA SBC HSB-800I-A11

Safety Precautions

Please read the following safety instructions carefully. It is advised that you keep this

manual for future references

1. All cautions and warnings on the device should be noted.

2. Make sure the power source matches the power rating of the device.

3. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

4. Always completely disconnect the power before working on the system’s

hardware.

5. No connections should be made when the system is powered as a sudden rush

of power may damage sensitive electronic components.

6. If the device is not to be used for a long time, disconnect it from the power

supply to avoid damage by transient over-voltage.

7. Always disconnect this device from any AC supply before cleaning.

8. While cleaning, use a damp cloth instead of liquid or spray detergents.

9. Make sure the device is installed near a power outlet and is easily accessible.

10. Keep this device away from humidity.

11. Place the device on a solid surface during installation to prevent falls

12. Do not cover the openings on the device to ensure optimal heat dissipation.

13. Watch out for high temperatures when the system is running.

14. Do not touch the heat sink or heat spreader when the system is running

15. Never pour any liquid into the openings. This could cause fire or electric shock.

16. As most electronic components are sensitive to static electrical charge, be sure to

ground yourself to prevent static charge when installing the internal components.

Use a grounding wrist strap and contain all electronic components in any

static-shielded containers.

Preface VII

Half-Sized ISA SBC HSB-800I-A11

17. If any of the following situations arises, please the contact our service personnel:

i. Damaged power cord or plug

ii. Liquid intrusion to the device

iii. Exposure to moisture

iv. Device is not working as expected or in a manner as described in

this manual

v. The device is dropped or damaged

vi. Any obvious signs of damage displayed on the device

18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH

TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES

(SEE CHAPTER 1) TO PREVENT DAMAGE.

Preface VIII

Half-Sized ISA SBC HSB-800I-A11

FCC Statement

This device complies with Part 15 FCC Rules. Operation is

subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any

interference received including interference that may cause

undesired operation.

Caution:

There is a danger of explosion if the battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by the manufacturer. Dispose of used batteries

according to the manufacturer’s instructions and your local government’s recycling or

disposal directives.

Attention:

Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.

Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur.

Recycler les batteries usées en accord avec les instructions du fabricant et les directives

gouvernementales de recyclage.

Preface IX

Half-Sized ISA SBC HSB-800I-A11

China RoHS Requirements (CN)

产品中有毒有害物质或元素名称及含量

AAEON Main Board/ Daughter Board/ Backplane

部件名称

有毒有害物质或元素

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

印刷电路板

及其电子组件

○

外部信号

连接器及线材

○

O：表示该有毒有害物质在该部件所有均质材料中的含量均在

SJ/T 11363-2006 标准规定的限量要求以下。

X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出

SJ/T 11363-2006 标准规定的限量要求。

备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。

Preface X

Half-Sized ISA SBC HSB-800I-A11

China RoHS Requirement (EN)

Poisonous or Hazardous Substances or Elements in Products

AAEON Main Board/ Daughter Board/ Backplane

Component

Poisonous or Hazardous Substances or Elements

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

Chromium

(Cr(VI))

Polybrominated

Biphenyls

(PBB)

Polybrominated

Diphenyl Ethers

(PBDE)

PCB & Other

Components

O

○

Wires &

Connectors

for External

Connections

O

O：The quantity of poisonous or hazardous substances or elements found in each of the

component's parts is below the SJ/T 11363-2006-stipulated requirement.

X: The quantity of poisonous or hazardous substances or elements found in at least one of the

component's parts is beyond the SJ/T 11363-2006-stipulated requirement.

Note: The Environment Friendly Use Period as labeled on this product is applicable under normal

usage only

 
 
Preface    XI 
Half-Sized ISA SBC      HSB-800I-A11 
 
Table of Contents 
 
Chapter 1 - Product Specifications.......................................................................................... 1 
1  Specifications ............................................................................................................ 2 
Chapter 2 – Hardware Information ....................................................................................... 4 
1  Dimensions ............................................................................................................... 5 
2  Jumpers and Connectors ....................................................................................... 6 
3  List of Jumpers and Switches ................................................................................ 7 
3.1  CFD Voltage 3.3V/ 5V Selection (JP1) ...................................................... 7 
3.2  Clear CMOS (JP2) ........................................................................................ 7 
3.3  AT/ATX Power Type Selection (JP3) .......................................................... 8 
3.4  LCD Clock and Power Selection (JP4) ...................................................... 8 
3.5  Inverter Voltage Selection (JP5) ................................................................ 8 
4  List of Connectors .................................................................................................... 9 
4.1  Digital I/O (CN1) .......................................................................................... 10 
4.2  Fan Connector (CN2) ................................................................................. 11 
4.3  Audio Input/ Output/ CD-in/ MIC (CN3)............................................... 11 
4.4  LCD Inverter Power Connector (CN4) .................................................... 11 
4.5  TFT LCD Connector (CN5) ........................................................................ 12 
4.6  +5VSB Power Connector (CN6) ............................................................... 13 
4.7  AT Power 5V, 12V Connector (CN7) ........................................................14 
4.8  LVDS Connector (CN9, 10) ........................................................................14 
4.9  PS/2 Keyboard/Mouse Connector (CN11) ............................................. 15 
4.10  Internal Keyboard Connector (CN12) ..................................................... 15 
4.11  RS-232 Serial Port Header (COM1/ COM3/ COM4) ........................... 16 
4.12  RS-232/422/485 Serial Port Header (COM2) ....................................... 16 
4.13  Front Panel Connector 1 (FP1) .................................................................. 16 
4.14  Front Panel Connector 2 (FP2) ................................................................. 17 

 
 
Preface    XII 
Half-Sized ISA SBC      HSB-800I-A11 
 
2.4.15  IrDA Connector (IR1) .................................................................................. 17 
2.4.16  LPT Port Connector (LPT1) ........................................................................ 17 
2.4.17  USB2.0 Header (USB1/ USB2/ USB3) ...................................................... 18 
2.5  Function Block Diagram ........................................................................................ 19 
Chapter 3 - Award BIOS Setup ............................................................................................ 20 
3.1  System Test and Initialization ............................................................................... 21 
3.2  Award BIOS Setup ................................................................................................. 22 
3.3  Standard CMOS Features .................................................................................... 24 
3.4  Advanced BIOS Features ..................................................................................... 27 
3.5  Advanced Chipset Features ................................................................................. 33 
3.6  Integrated Peripherals .......................................................................................... 36 
3.7  Power Management Setup .................................................................................. 40 
3.8  PnP/PCI Configurations ........................................................................................ 43 
3.9  PC Health Status .................................................................................................... 45 
3.10  Frequency/Voltage Control ................................................................................. 47 
Chapter 4 – Drivers Installation ............................................................................................ 48 
4.1  Drivers Download and Installation ..................................................................... 49 
Appendix A - Watchdog Timer ............................................................................................ 50 
A.1  Programming the Watchdog Timer ................................................................... 51 
A.2  Watchdog Timer Initial Program ........................................................................ 55 
Appendix B - I/O Information .............................................................................................. 60 
B.1  I/O Address Map .................................................................................................... 61 
B.2  Memory Address Map ......................................................................................... 62 
B.3  IRQ Mapping Chart ............................................................................................... 63 
B.4  DMA Channel Assignments ................................................................................ 63 
 
 

Half-Sized ISA SBC HSB-800I-A11

Chapter 1

Chapter 1 - Product Specifications

Chapter 1 – Product Specifications 2

Half-Sized ISA SBC HSB-800I-A11

1.1 Specifications

System

Form Factor

PICMG 1.0 Half-Size Pure ISA CPU Card

Bus Interface

ISA

CPU

AMD Geode™ LX 800

Memory Type

Onboard 128 MB DDR 400

Chipset

AMD Geode™ CS 5536

BIOS

Award Plug & Play FWH BIOS – 8MB ROM

Wake on LAN

No

Watchdog Timer

255 Levels

Power Requirement

ATX 2.1

Power Consumption (Typical)

AMD LX800, DDR400 128MB 0.19A at +12V,

1.51A at +5V, 9.83W

Power Supply Type

+5V, +12V operation, AT mode

Dimensions (L x W)

7.3" x 4.8" (185mm x 122mm)

Operating Temperature

32°F ~ 140°F (0°C ~ 60°C)

Storage Temperature

-40°F ~ 176°F (-40°C ~ 80°C)

Operating Humidity

0% ~ 90% relative humidity, non-condensing

MTBF (Hours)

85,000

Certification

CE/FCC, Class A

Chapter 1 – Product Specifications 3

Half-Sized ISA SBC HSB-800I-A11

Display

VGA/LCD Controller

AMD Geode™ LX 800

Video Output

1600 x 1200@32bpp at 100 MHz for VGA

1600 x 1200@24bpp for LCD

Backlight Inverter Supply

5V, 12V

I/O

Ethernet

10/100 Mbps LAN x1

or 10/100/1000 Mbps LAN x1 (optional)

Audio

AC97 Codec

USB Port

USB2.0 x 4

Serial Port

COM x 4 (Internal Pin Header x 4)

COM1, COM3, COM4: RS-232

COM2: RS-232/422/485

Parallel Port

1 (Support SPP/EPP/ECP mode)

HDD Interface

IDE x 1

FDD Interface

Standard FDD port x 1, support up to 1 floppy

device

SSD

CompactFlash™ Type II x 1

Expansion Slot

ISA, PC/104

DIO

8-bit Programmable (4-in/4-out)

TPM

—

Half-Sized ISA SBC HSB-800I-A11

Chapter 2

Chapter 2 – Hardware Information

Chapter 2 – Hardware Information 5

Half-Sized ISA SBC HSB-800I-A11

2.1 Dimensions

185.00

122.00

15.20 8.60

Chapter 2 – Hardware Information 6

Half-Sized ISA SBC HSB-800I-A11

2.2 Jumpers and Connectors

Component Side

Solder Side

Chapter 2 – Hardware Information 7

Half-Sized ISA SBC HSB-800I-A11

2.3 List of Jumpers and Switches

Please refer to the table below for all of the board’s jumpers that you can configure for

your application

Label

Function

JP1

CFD Voltage 3.3V/ 5V Selection

JP2

Clear CMOS

JP3

AT/ATX Power Type Selection

JP4

LCD Clock and Power Selection

JP5

Inverter Voltage Selection

2.3.1 CFD Voltage 3.3V/ 5V Selection (JP1)

3.3V (Default)

5V

2.3.2 Clear CMOS (JP2)

Normal (Default)

Clear CMOS

1 2 3

Chapter 2 – Hardware Information 8

Half-Sized ISA SBC HSB-800I-A11

2.3.3 AT/ATX Power Type Selection (JP3)

Setting

Function

1-2 Closed

ATX Power Supply (Default)

1-2 Open

AT Power Supply

Note: Only AT Function without Backplanes.

2.3.4 LCD Clock and Power Selection (JP4)

LCD Clock Selection

Normal (Default)

Inverse

LCD Power Selection

+5Vlcd

+3Vlcd (Default)

Note: To prevent damage to your system, do not use any other configuration for JP4

than those shown above.

2.3.5 Inverter Voltage Selection (JP5)

+12V

+5V (Default)

1 2 3

Page is loading ...

Aaeon HSB-800I-A11 User manual

Aaeon HSB-800I-A11 User manual

Related papers

Other documents