Senseo HD7825 User manual

Page is loading ...

6

Table of contents

Introduction 6

General description 8

Important 8

First use 11

Brewing SENSEO

®

coffee 12

Cleaning the machine 16

Descaling 19

Frost-free storage 22

Replacement 23

Environment 23

Guarantee and service 23

Troubleshooting 23

Introduction

Congratulations on your purchase and welcome

to Philips! To fully benet from the support

that Philips offers, register your product at

www.philips.com/welcome.

Make your coffee moments truly special with

SENSEO

®

. This unique system combines the

easy-to-use Philips SENSEO

®

coffee machine with

the specially developed Douwe Egberts SENSEO

®

coffee pods, giving you a full, smooth coffee with a

delicious foam layer.

The Douwe Egberts coffee in convenient SENSEO

®

coffee pods and Philips’ unique new SENSEO

®

brewing system are perfectly matched to ensure

that the best taste and aroma are extracted from

the coffee.

To ensure a smooth and full coffee taste, you should

keep the following things in mind:

ENGLISH

Fresh water

Use fresh water every day. If you have not used the

coffee machine for three days, you have to ush it

with fresh water before you use it again (see section

‘Flushing’ in chapter ‘Cleaning’).

Fresh coffee pods

Use the SENSEO

®

coffee pods that have been

specially developed by Douwe Egberts for your

SENSEO

®

coffee machine for a full, round taste.

The Douwe Egberts SENSEO

®

coffee pods stay

fresh longer if you store them in an airtight

storage container.

Discover all SENSEO

®

coffee blends that are available

at www.senseo.com.

A clean machine - new ushing and

descaling procedures!

Note: Philips has improved the ushing and descaling

procedures. See chapters ‘Cleaning’ and ‘Descaling’ for

the new procedures.

Clean and descale your Philips SENSEO

®

coffee

machine regularly.

- Remove used coffee pods after brewing. If a used

pod has been left in the coffee machine and you

have not used the machine for some time, ush

the machine before you use it again (see section

‘Flushing’ in chapter ‘Cleaning’).

- If you have not used the coffee machine for three

days, you have to ush the machine with fresh

water before you use the machine again (see

section ‘Flushing’ in chapter ‘Cleaning’).

ENGLISH 7

- Descale the SENSEO

®

coffee machine as

described in chapter ‘Descaling’ when the

CALC light goes on (after you have brewed

approx. 400 cups of SENSEO

®

coffee). You can

also descale the SENSEO

®

coffee machine more

often (every 3 months) in the same way. Descaling

takes 20 to 30 minutes. Do not interrupt the

descaling process.

General description (Fig. 1)

A Water reservoir

B Water reservoir cover

C Sealing ring

D Water distribution disc

E CALC light

F 1-cup button q

G On/off button with light ring

H 2-cup button qq

I Drip tray

J Cup tray

K Coffee spout

L Cover of coffee spout

M Coffee collector

N 2-cup pod holder qq

O 1-cup pod holder q

Important

Read this user manual carefully before you use the

machine and save it for future reference.

Danger

- Never immerse the machine in water or any

other liquid.

ENGLISH8

Warning

- Check if the voltage indicated on the bottom of

the machine corresponds to the local mains voltage

before you connect the machine.

- This machine is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the machine by a

person responsible for their safety.

- Children should be supervised to ensure that they

do not play with the machine.

- Do not use the machine if the plug, the mains cord

or the machine itself is damaged.

- If the mains cord is damaged, you must have it

replaced by Philips, a service centre authorised by

Philips or similarly qualied persons in order to

avoid a hazard.

Caution

- Always return the machine to a service centre

authorised by Philips for examination or repair.

Do not attempt to repair the machine yourself,

otherwise your guarantee becomes invalid.

- Never put normal ground coffee or use torn pods

in the SENSEO

®

machine, as this causes it to

become blocked.

- Do not use the machine in combination with a

transformer, as this could cause hazardous situations.

- Always put the machine on a at and stable

surface.

- Never let the machine operate unattended.

- Do not use the machine at altitudes higher than

2200 metres above sea level.

- The machine does not work at temperatures

below 10°C.

ENGLISH 9

- Flush the coffee machine with fresh water before

you use it for the rst time (see chapter ‘Before rst

use’). This causes the boiler to ll with water, which

is essential for the machine to work properly.

- Do not use the SENSEO

®

machine in combination

with water softeners based on sodium exchange.

- Philips strongly advises you to descale this SENSEO

®

machine every 3 months. If the machine is not

descaled in time and according to the procedure

described in chapter ‘Descaling’, this may lead to

technical failures.

- Never interrupt the descaling process.

- Never use a descaling agent based on mineral

acids such as sulphuric acid, hydrochloric acid,

sulphamic acid and acetic acid (e.g. vinegar).

These descaling agents may damage your

SENSEO

®

coffee machine.

- After unpacking the machine, never put your

SENSEO

®

machine on its side. Always keep it in

upright position, also during transport.

- This machine is intended for normal household

use only. It is not intended for use in environments

such as staff kitchens of shops, ofces, farms or

other work environments. Nor is it intended

to be used by clients in hotels, motels, bed and

breakfasts and other residential environments.

Compliance with standards

, This machine complies with all standards regarding

electromagnetic elds (EMF). If handled properly

and according to the instructions in this user

manual, the machine is safe to use based on

scientic evidence available today.

, The energy consumption of this machine in off

mode is less than 1 watt. This means that this

machine complies with European Directive

2005/32/EC, which sets the ecological design

requirements for energy-using products.

ENGLISH10

First use

Unpacking

1 Remove the machine from the box.

Note: Make sure you store the 2-cup pod holder in a

safe place. It is an essential part of the machine.

Flushing the machine to ll the boiler

YOU CANNOT BREW COFFEE IF YOU

HAVE NOT FLUSHED THE SENSEO

®

COFFEE

MACHINE FIRST!

The ushing causes the boiler to be lled with water.

After this, the machine is ready for use.

Flush the machine in the following way:

1 Place a bowl with a capacity of at least 1.5 litres

on the cup tray.

2 Fill the water reservoir with cold water up to

the MAX indication and put it back onto the

machine.

3 Make sure a pod holder, without pod or pods,

is in place.

4 Put the plug in an earthed wall socket.

5 Press the on/off button 3.

The light rings around the 1-cup button q and the

2-cup button qq light up continuously.

6 To start ushing, press the 1-cup button q and

the 2-cup button qq briey at the same time.

ENGLISH 11

During the ushing cycle, the water in the water

reservoir is ushed through the machine and the

boiler is lled with water. The ushing cycle takes

some time (approx. 90 to 150 seconds).

Never interrupt the ushing cycle halfway. If you

do, the boiler does not ll itself properly.

Note: During the ushing cycle, the machine produces

more noise than during a regular brewing cycle.

The machine switches off automatically when the

ushing cycle ends.

Now your Philips SENSEO

®

coffee machine

is ready for use.

Note: If the machine does not work, repeat steps 1-7.

Do not interrupt the ushing cycle.

Brewing SENSEO

®

coffee

Filling the water reservoir

1 Fill the water reservoir with cold water up to

the MAX indication and put it back onto the

machine.

The MIN indication on the water reservoir

indicated the minimum amount of water required

for brewing coffee. Always ll the water reservoir

beyond the MIN level.

Never pour milk, coffee, hot water or carbonated

water into the water reservoir.

ENGLISH12

Switching on the machine

1 Press the on/off button 3.

, The light ring ashes slowly while the water

heats up. Heating up takes approx. 75 seconds.

, The coffee machine is ready for use when

the light ring lights up continuously.

Note: If the light ring ashes rapidly, the water reservoir

does not contain enough water for brewing one cup

of coffee.

Placing a pod holder

1 Release the lid by moving the lever upwards.

, The lid opens automatically.

2 Place the appropriate pod holder in the

machine.

Note: Make sure the pod holder is clean and the sieve

in the centre is not clogged, e.g. with loose coffee grounds.

- If you want to make one cup of SENSEO

®

coffee,

use 1 coffee pod in combination with the 1-cup

pod holder q and the 1- cup button q.

- If you want to make two cups of SENSEO coffee,

use 2 coffee pods in combination with the deeper

2-cup pod holder qq and the 2-cup button qq.

ENGLISH 13

Placing one or two pods

1 Place the SENSEO

®

coffee pod(s) properly in

the centre of the pod holder, with the convex

side pointing downwards.

Note: Use SENSEO

®

coffee pods from Douwe Egberts

specially designed for your SENSEO

®

coffee machine

for a full and round taste.

Note: Make sure the coffee in the pod(s) is evenly

distributed and press the pod(s) lightly into the pod

holder.

Note: Never put normal ground coffee or use torn pods

in the SENSEO

®

machine, as this causes it to become

blocked.

- Place 1 SENSEO

®

coffee pod in the 1-cup pod

holder q.

- Place 2 SENSEO

®

coffee pods in the 2-cup pod

holder qq.

2 Close the lid and lock the lever.

It is not possible to brew coffee when the lid is not

properly closed and the lid lever is not locked. In

this case, the light ring around the on/off button

ashes intermittently

3 Place one cup or two cups under the spout

openings. You can adjust the height of the coffee

spout by sliding it upwards or downwards.

The cups you use should have a capacity of at least

150 ml. Do not use cups that are too large, as

they cause the coffee to get cold more quickly.

ENGLISH14

4 Press the button indicating the number of cups

of SENSEO

®

coffee you want to brew.

- Press the 1-cup button q for one cup.

- Press the 2-cup button qq for two cups.

The SENSEO

®

coffee machine starts

brewing.

- The machine automatically supplies the optimal

amount of water.

- You can interrupt the brewing process at any time

by pressing the on/off button 3. If you switch

the machine back on after having interrupted the

brewing process, the machine does not complete

the interrupted brewing cycle.

Do not remove the water reservoir during a

brewing cycle, as this causes the machine to

draw in air. When this happens, the next cup is

only partly lled.

Note: If no coffee comes out of the machine, you have

not ushed the machine before rst use. As a result,

the boiler is not lled. Flush the machine as described

in chapter ‘Before rst use’ before you start brewing

coffee. If only a small amount of coffee comes out of

the machine, ush the machine as described in section

‘Flushing’ in chapter ‘Cleaning’ before you brew another

cup of coffee.

5 Remove the coffee pod(s) after use by lifting

the pod holder out of the machine and

emptying it.

Be careful when you do this, for there may still be

some water/coffee on the coffee pod(s).

ENGLISH 15

Interrupting the brewing process

1 Press the on/off button 3 to interrupt the

brewing proces.

Note: If you do not switch of the machine, it switches

off automatically after 30 minutes.

Switching off

1 After use, press the on/off button 3 to switch

off the machine.

Note: If you do not switch off the machine, it switches

off automatically after 30 minutes.

Tips for the best SENSEO

®

quality

- Use fresh water every time.

- Use the SENSEO

®

coffee pods that have been

specially developed by Douwe Egberts for your

SENSEO

®

coffee machine for a full, round taste.

Cleaning the machine

Never immerse the SENSEO

®

coffee machine in

water.

Cleaning the coffee machine

1 Always unplug the machine before you clean it.

2 Clean the outside of the machine with a

moist cloth.

3 Remove the coffee collector.

ENGLISH16

4 Take the coffee spout out of the machine by

sliding it upwards.

Note: You can only remove the coffee spout after you

have removed the coffee collector.

5 Disassemble the coffee spout if you want to

clean it more thoroughly.

6 Clean the coffee spout, the coffee collector

and the drip tray in hot water, if necessary with

some washing-up liquid, or in the dishwasher.

7 Hold the cup tray in your hand while you

clean it with hot water. If necessary, use some

washing-up liquid.

The cup tray can also be cleaned in the dishwasher.

To clean the cup tray, always remove it from the

machine, as it might prove sharp when handled

incorrectly. Always handle it carefully.

8 Clean the pod holders in hot water, if

necessary with some washing-up liquid, or in

the dishwasher.

Check if the sieve in the centre of the pod holder is

clogged. If this is the case, unclog the sieve by rinsing

the pod holder under a running tap. If necessary, use

a washing-up brush to clean the sieve.

ENGLISH 17

9 Clean the water reservoir in hot water, if

necessary with some washing-up liquid.

Note: If you use a washing-up brush, be careful not to

damage the valve in the bottom of the water reservoir.

Remove the water reservoir cover for easier cleaning.

10 Clean the water inlet on the machine with a

moist cloth.

Do not use an object with sharp edges to clean the

water inlet.

11 Rinse the parts with fresh water and put them

back into the machine.

12 Clean the water distribution disc with a moist

cloth.

Be careful when you do this; make sure that the

rubber sealing ring does not get stuck under the

edge of the water distribution disc. If it does, the

coffee machine will start leaking!

Note: Be careful not to damage the metal tab on the

water distribution disc.

Flushing the coffee machine

If you have not used the coffee machine for three

days, you have to ush the machine with fresh water

before you use the machine again.

To ush the boiler, brew two cups of hot water in

the following way:

1 Fill the water reservoir with cold water at least

up to the MIN level and put it back into the

machine.

ENGLISH18

2 Put the 1-cup pod holder q or the 2-cup pod

holder qq in the machine without pod(s).

3 Close the lid and lock the lever.

4 Put two cups or a bowl under the coffee spout

to collect the water.

5 Press the on/off button 3.

, The light ring ashes slowly while the water

heats up. Heating up takes approx. 75 seconds.

, The coffee machine is ready for use when

the light ring lights up continuously.

6 Press the 2-cup button qq to brew two cups

of hot water.

7 Throw away this water. Now the machine is

ready for use again.

Descaling

When to descale

Descale the SENSEO

®

coffee machine as described

below when the CALC light goes on (after you have

brewed approx. 400 cups of SENSEO

®

coffee). You

can also descale the SENSEO

®

coffee machine more

often (every 3 months) in the same way. Descaling

takes 20 to 30 minutes. Do not interrupt the

descaling process.

ENGLISH 19

Why to descale

Scale builds up inside the machine during use. It is

essential to descale the SENSEO

®

coffee machine at

least every 3 months. Your reasons to descale:

- It prolongs the life of your SENSEO

®

coffee

machine

- It ensures maximum cup volume

- It ensures maximum coffee temperature

- The machine produces less sound during brewing

- It prevents malfunctioning

If the descaling procedure is not performed correctly,

scale residue remains behind in the machine. This

causes scale to build up more quickly and may cause

permanent and irreparable damage to the machine.

Use the correct descaling agent

Only citric acid-based descalers are suitable for

descaling the SENSEO

®

machine. This type of

descaler descales the machine without damaging

it. For the correct amount, see under ‘Descaling

procedure’ below. Each descaling mixture can be

used only once. After use, the descaling mixture is no

longer active.

We advise you to use the special SENSEO

®

Descaler (HD7012, HD7011, HD7006). For more

information about this descaler, visit our website

www.philips.com.

Never use a descaling agent based on mineral acids

such as sulphuric acid, hydrochloric acid, sulphamic

acid and acetic acid (e.g. vinegar). These descaling

agents may damage your SENSEO

®

coffee machine.

ENGLISH20

Descaling procedure

Descaling cycle

1 Mix 50 grams of citric acid with 1 litre of water

in a measuring jug. Stir until the powder is

completely dissolved.

2 Fill the water reservoir with the descaler

mixture. Then put the water reservoir back

onto the coffee machine.

3 Press the on/off button 3.

, The machine is ready for use when the light ring

lights up continuously.

4 Place the 1-cup pod holder q with a used

coffee pod in it in the coffee machine. Close

the lid and make sure it is properly locked.

It is not possible to descale the machine

when the lid is not properly closed and the lid

lever is not locked. In this case, the indicator

light ashes intermittently.

Note: Always put a used coffee pod in the pod holder

when you descale the machine. This pod serves as a

‘lter’ to prevent the sieve or hole in the pod holder

from getting clogged with scale residue.

5 Put a bowl with a capacity of at least 1500ml

under the spout to collect the descaling

mixture.

6 Press the 1-cup button q and the 2-cup button

qq briey at the same time to start the

descaling cycle.

, The CALC light starts ashing to indicate that

the descaling cycle has started.

ENGLISH 21

, Hot water comes out of the coffee spout in

intervals. During the descaling cycle, the machine

stops descaling 3 to 4 times to let the descaler

mixture soak in and to heat up.

Let the machine complete the entire descaling cycle,

which takes 4 to 5 minutes. Do not switch off the

machine during the descaling cycle!

, When all the water in the water reservoir has

been used up, the descaling cycle is nished.

The light ring around the on/off button starts to

ash rapidly.

7 Repeat the descaling procedure (steps 1 to 6)

once. Replace the used pod with another used

pod to lter out the scale residue.

8 Rinse the water reservoir with tap water. Fill

the water reservoir up to the MAX indication

with tap water and repeat steps 3 to 6.

Note: Do not rell the water reservoir with used hot

water or the used descaling mixture.

9 Fill the water reservoir with fresh tap water up

to the MAX indication again and repeat steps

3 to 6 once more.

Note: Always rinse the machine by letting it empty two

full water reservoirs.

10 Remove the used pod and clean the pod holder

after descaling to prevent the sieve in the centre

from getting clogged.

ENGLISH22

Frost-free storage

After you have ushed the machine for the rst

time (see chapter ‘Before rst use’), it may only

be used and stored in a frost-free place to

prevent damage.

Replacement

You can order all removable parts from your Philips

dealer or a Philips service centre. You can also order

them online at www.support.philips.com.

Environment

- Do not throw away the machine with the normal

household waste at the end of its life, but hand

it in at an ofcial collection point for recycling. By

doing this, you help to preserve the environment.

Guarantee and service

If you need service or information or if you have

a problem, please visit the Philips website at

www.philips.com or contact the Philips Consumer

Care Centre in your country (you nd its phone

number in the worldwide guarantee leaet). If there

is no Consumer Care Centre in your country, go

to your local Philips dealer.

The purchase of the Philips SENSEO

®

coffee machine

does not exhaust any of the rights of Sara Lee/

Douwe Egberts or Philips under any of their patents

nor does it confer upon the purchaser a licence

under these patents.

ENGLISH 23

Troubleshooting

This chapter summarises the most common problems

you could encounter with the machine. If you are

unable to solve the problem with the information

below, contact the Consumer Care Centre in

your country.

Problem Solution

The light

ring around

the on/off

button ashes

slowly.

You have used the SENSEO

®

coffee machine at an

altitude higher than 2200 metres above sea level. This

has caused the water in the machine to start boiling

before it has reached the required temperature,

which prevents the machine from functioning

properly. Switch off the machine and no longer use it

at altitudes higher than 2200 metres above sea level.

The CALC light

ashes.

You have pressed the 1-cup button and the 2-cup

button at the same time. This started the descaling

cycle. If you did not intend to start the descaling

cycle, simply press the on/off button to switch off the

machine. If you did intend to start the descaling cycle,

do not interrupt this cycle but let the appliance

operate until the water reservoir is empty.

The light ring

around the

on/off button

continues to

ash rapidly.

Make sure that:

the water reservoir is placed properly;

there is enough water in the water reservoir (i.e.

above the q MIN level if you want to brew 1 cup);

the ambient temperature is not lower than 10°C. If it

is, the machine does not function properly.

ENGLISH24

Problem Solution

Water leaks

from the coffee

machine.

Make sure that:

the water reservoir has not been lled beyond the

MAX level;

the sieve in the centre of the pod holder is not

clogged. If it is, unclog the sieve by holding the pod

holder under a running tap;

the coffee pod has been put properly in the centre

of the pod holder;

the sealing ring has not got stuck under the edge

of the water distribution disc (see gure 1 at the

beginning of this user manual).

the water drops on the worktop are not the result

of placing or removing the water reservoir or

removing used coffee pods.

you do not remove the water reservoir when the

coffee machine is heating up. This may cause water

that normally ends up in the water reservoir to leak

out of the machine.

In all other cases, contact the Philips Consumer Care

Centre in your country.

I cannot take

the coffee

spout out of

the machine.

You can only remove the coffee spout after you have

removed the coffee collector.

I cannot open

the lid.

A vacuum may have temporarily formed under

the lid.

ENGLISH 25

Page is loading ...

Senseo HD7825, HD7825/51, HD7825/80 User manual

Related papers

Other documents