Homelite ut42100 User manual

OPERATOR’S MANUAL

MANUEL D’UTILISATION

MANUAL DEL OPERADOR

ELECTRIC BLOWER/VAC

SOUFFLANTE/ASPIRATEUR ÉLECTRIQUE

SOPLADORA/ASPIRADORA ELÉCTRICA

UT42120

ALL VERSIONS/TOUTES LES VERSIONS/

TODAS LAS VERSIONES

GUARDE ESTE MANUAL PARA

FUTURAS CONSULTAS

CONSERVER CE MANUEL POUR

FUTURE RÉFÉRENCE

Cette soufflante/aspirateur électrique a été conçue et fabriquée

conformément aux strictes normes de fiabilité, simplicité d’emploi

et sécurité d’utilisation de Homelite. Correctement entretenue,

elle vous donnera des années de fonctionnement robuste et sans

problème.

AVERTISSEMENT : Pour

réduire les risques de blessures, l’utilisateur doit lire et veiller

à bien comprendre le manuel d’utilisation avant d’employer

ce produit.

Merci d’avoir acheté un produit Homelite.

Your blower/vac has been engineered and manufactured to Homelite’s high standard for dependability, ease of operation,

and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.

WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before

using this product.

Thank you for buying a Homelite product.

Su sopladora/aspiradora ha sido diseñada y fabricada de

conformidad con las estrictas normas de Homelite para brindar

fiabilidad, facilidad de uso y seguridad para el operador. Con el

debido cuidado, le brindará muchos años de sólido y eficiente

funcionamiento.

ADVERTENCIA: Para reducir el

riesgo de lesiones, el usuario debe leer y comprender el manual

del operador antes de usar este producto.

Le agradecemos la compra de un producto Homelite.

SAVE THIS MANUAL FOR FUTURE REFERENCE

Page is loading ...

Page 3 – English

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

READ AND UNDERSTAND ALL INSTRUCTIONS. Fail-

ure to follow all instructions listed below may result in

electric shock, fire, and/or serious personal injury.

READ THESE INSTRUCTIONS BEFORE USING

THIS BLOWER/VAC

Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases, or

dust. Power tools create sparks which may ignite the dust

or fumes.

To reduce the risk of electric shock, this tool has a po-

larized plug (one blade is wider than the other) and will

require the use of a polarized extension cord. The plug

will fit into a polarized extension cord only one way. If the

plug does not fit fully into the extension cord, reverse the

plug. If the plug still does not fit, obtain a correct polarized

extension cord. A polarized extension cord will require

the use of a polarized wall outlet. This plug will fit into the

polarized wall outlet only one way. If the plug does not fit

fully into the wall outlet, reverse the plug. If the plug still

does not fit, contact a qualified electrician to install the

proper wall outlet. Do not change the equipment plug,

extension cord receptacle, or extension cord plug in any

way.

Avoid body contact with grounded surfaces such as pipes,

radiators, ranges, and refrigerators. There is an increased

risk of electric shock if your body is grounded.

Don’t expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

Do not handle plug or tool with wet hands.

Use outdoor extension cords marked W-A, W, SW-A,

SOW-A, STW-A, STOW-A, SJW-A, SJTW-A, or SJTOW-A.

These cords are rated for outdoor use and reduce the risk

of electric shock.

Never allow children to operate the equipment. Never

allow adults to operate the equipment without proper

instruction.

 Wear eye protection with side shields which is marked to

comply with ANSI Z87.1, along with hearing protection

when operating this product.

Always use face or dust mask if operation is dusty.

Use extra care when cleaning on stairs.

Do not leave appliance plugged in. Unplug from outlet

when not in use and before servicing.

Do not expose to rain, store indoors.

Use only as described in this manual. Use only manufac-

turer’s recommended attachments.

Keep hair, loose clothing, fingers, and all body parts away

from openings and moving parts.

To reduce the risk of electric shock, this appliance has a

polarized plug (one blade is wider than the other). This

plug will fit in a polarized outlet only one way. If the plug

does not fit fully in the outlet, reverse the plug. If it still

does not fit, contact a qualified electrician to install the

proper outlet. Do not change the plug in any way.

Wear heavy long pants, long sleeves, boots, and gloves.

Avoid loose garments or jewelry that could get caught in

moving parts of the machine or its motor.

Do not force tool. Use the correct tool for your

application. The correct tool will do the job better and

safer at the rate for which it is designed.

Do not operate the equipment while barefoot or when

wearing sandals or similar lightweight footwear. Wear

protective footwear that will protect your feet and improve

your footing on slippery surfaces.

Do not use on steps, a ladder, roof top, tree, or other

unstable support. Stable footing on a solid surface

enables better control of the blower/vac in unexpected

situations.

Secure long hair so it is above shoulder level to prevent

entanglement in any moving parts.

Keep firm footing and balance. Do not overreach.

Overreaching can result in loss of balance.

Turn off all controls before unplugging.

Do not allow to be used as a toy. Close attention is nec-

essary when used by or near children.

 Avoid accidental starting. Be sure the power switch is

not on before plugging in. Turn off power switch before

unplugging.

Do not use tool if switch does not turn it on or off. Any

tool that cannot be controlled with the switch is danger-

ous and must be repaired.

Do not leave the tool when plugged in. Unplug from

the power outlet when not in use, before servicing, and

before storing the tool. Such preventative safety measures

reduce the risk of starting the tool accidentally.

Keep all bystanders, children, and pets at least 50 ft.

away.

Do not operate this unit when you are tired, ill, upset, or

under the influence of alcohol, drugs, or medication.

Do not operate in poor lighting.

Keep all parts of your body away from any moving parts

and all hot surfaces of the unit.

Check the work area before each use. Remove all objects

such as rocks, broken glass, nails, wire, or string which

can be thrown or become entangled in the machine.

Never use blower/vac near fires, fireplaces, hot ashes,

barbecue pits, etc., which may cause fire to spread.

Do not pull or carry by cord, use cord as a handle, close

a door on a cord, or pull cord around sharp edges or

corners. Keep cord away from heated surfaces.

Page 4 – English

Make sure your extension cord is in good condition.

When using an extension cord, be sure to use one heavy

enough to carry the current your product will draw. A wire

gauge size (A.W.G.) of at least 14 is recommended for an

extension cord 50 feet or less in length. If in doubt, use the

next heavier gauge. The smaller the gauge number, the

heavier the cord. An undersized cord will cause a drop in

line voltage resulting in loss of power and overheating.

Do not point the blower nozzle in the direction of people

or pets.

Never place blower/vac on any surface, except a hard,

clean surface when motor is running. Gravel, sand, and

other debris can be picked up by the air inlet and thrown

at the operator or bystanders, causing possible serious

injuries.

When used as a blower, always install the blower tubes.

When used as a vacuum, always install the vacuum tubes

and vacuum bag. Make sure the vacuum bag is completely

zipped when the unit is running to avoid flying debris.

Do not operate vacuum without vacuum bag installed;

flying debris could cause serious injury. Always close

vacuum bag completely before operating.

Rotating impeller blades can cause severe injury. Stop

the engine before opening the vacuum door or installing/

SPECIFIC SAFETY RULES

changing tubes. Do not put hands or any other object into

the vacuum tubes while they are installed on the unit.

Avoid situations that could catch the vacuum bag on

fire. Do not operate near an open flame. Do not vacuum

warm ash from fireplaces, barbeque pits, brush piles, etc.

Do not vacuum discarded cigars or cigarettes unless the

cinders are completely cool.

When not in use, blower/vac should be stored indoors in

a dry, locked up place—out of the reach of children.

Maintain tool with care. Keep fan area clean for best

and safest performance. Follow instructions for proper

maintenance.

Do not attempt to clear clogs from tool without first

unplugging it.

 If the power supply cord is damaged, it must be replaced

only by the manufacturer or by an authorized service

center to avoid risk.

 Protect your lungs. Wear a face or dust mask if the

operation is dusty. Following this rule will reduce the risk

of serious personal injury.

Save these instructions. Refer to them frequently and

use them to instruct others who may use this power tool.

If you loan someone this power tool, loan them these

instructions also.

IMPORTANT SAFETY INSTRUCTIONS

Do not pick up flammable or combustible liquids such as

gasoline or use in areas where they may be present.

Do not pick up anything that is burning or smoking such

as cigarette matches or hot ashes.

Do not unplug by pulling on cord. To unplug, grasp the

plug, not the cord.

Do not put any object into openings. Do not use with any

opening blocked; keep free of dust, lint, hair, and anything

that may reduce air flow.

Use only identical manufacturer’s replacement parts and

accessories. Use of any other parts may create a hazard

or cause product damage.

Do not use with damaged cord or plug. If appliance is

not working as it should, has been dropped, damaged,

left outdoors, or dropped into water, return it to a service

center.

In a double insulated appliance, two systems of insulation

are provided instead of grounding. No grounding means

is provided on a double insulated appliance, nor should

a means for grounding be added to the appliance.

Servicing a double insulated appliance requires extreme

care and knowledge of the system and should be done

only by qualified service personnel. Replacement parts

for a double insulated appliance must be identical to the

parts they replace.

For household use only.

SAVE THESE INSTRUCTIONS

Page 5 – English

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper

interpretation of these symbols will allow you to operate the product better and safer.

Safety Alert Indicates a potential personal injury hazard.

Read Operator’s Manual

To reduce the risk of injury, user must read and understand

operator’s manual before using this product.

Eye and Hearing Protection

Always wear eye protection with side shields marked to comply

with ANSI Z87.1, along with hearing protection.

Wet Conditions Alert Do not expose to rain or use in damp locations.

Keep Bystanders Away Keep all bystanders at least 50 ft. away.

Long Hair

Failure to keep long hair away from the air inlet could result in

personal injury.

Blower Tubes Do not operate without tubes in place.

Loose Clothing

Failure to keep loose clothing from being drawn into air intake

could result in personal injury.

V Volts Voltage

A Amperes Current

Hz Hertz Frequency (cycles per second)

W Watt Power

min Minutes Time

Alternating Current Type of current

Direct Current Type or a characteristic of current

Class II Construction Double-insulated construction

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL SIGNAL MEANING

DANGER:

Indicates an imminently hazardous situation, which, if not avoided, will result

in death or serious injury.

WARNING:

Indicates a potentially hazardous situation, which, if not avoided, could

result in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided, may result

in minor or moderate injury.

CAUTION:

(Without Safety Alert Symbol) Indicates a situation that may result in prop-

erty damage.

SYMBOL NAME

DESIGNATION/EXPLANATION

Page 6 – English

EXTENSION CORDS

When using a power product at a considerable distance from

a power source, be sure to use an extension cord that has

the capacity to handle the current the product will draw. An

undersized cord will cause a drop in line voltage, resulting in

overheating and loss of power. Use the chart to determine

the minimum wire size required in an extension cord. Only

round jacketed cords listed by Underwriter’s Laboratories

(UL) should be used.

When working outdoors with a product, use an extension

cord that is designed for outside use. This type of cord is

designated with “W-A” or “W” on the cord’s jacket.

Before using any extension cord, inspect it for loose or

exposed wires and cut or worn insulation.

**Ampere rating (on product data plate)

0-2.0 2.1-3.4 3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0

Cord Length Wire Size (A.W.G.)

25´ 16 16 16 16 14 14

50´ 16 16 16 14 14 12

100´ 16 16 14 12 10 —

**Used on 12 gauge - 20 amp circuit.

NOTE: AWG = American Wire Gauge

WARNING:

Keep the extension cord clear of the working area.

Position the cord so that it will not get caught on lumber,

tools, or other obstructions while you are working with

a power tool. Failure to do so can result in serious per-

sonal injury.

WARNING:

Check extension cords before each use. If damaged

replace immediately. Never use product with a damaged

cord since touching the damaged area could cause elec-

trical shock resulting in serious injury.

DOUBLE INSULATION

Double insulation is a concept in safety in electric power

tools, which eliminates the need for the usual three-

wire grounded power cord. All exposed metal parts are

isolated from the internal metal motor components with

protecting insulation. Double insulated tools do not need

to be grounded.

WARNING:

The double insulated system is intended to protect

the user from shock resulting from a break in the tool’s

internal insulation. Observe all normal safety precautions

to avoid electrical shock.

NOTE: Servicing of a product with double insulation requires

extreme care and knowledge of the system and should be

performed only by a qualified service technician. For service,

we suggest you return the tool to your nearest authorized

service center for repair. Always use original factory replace-

ment parts when servicing.

ELECTRICAL CONNECTION

This product has a precision-built electric motor. It should

be connected to a power supply that is 120 volts, AC only

(normal household current), 60 Hz. Do not operate this

product on direct current (DC). A substantial voltage drop

will cause a loss of power and the motor will overheat. If

your product does not operate when plugged into an outlet,

double-check the power supply.

GFCI

Ground Fault Circuit Interrupter (GFCI) protection should be

provided on the circuit(s) or outlet(s) to be used for the prod-

uct. Receptacles are available having built-in GFCI protection

and may be used for this measure of safety.

ELECTRICAL

Page 7 – English

FEATURES

PRODUCT SPECIFICATIONS

Weight ......................................................................................................................................................................... 6.4 lbs.

Input .....................................................................................................................................120 V, AC only, 60 Hz, 12 Amps

Air Velocity: MPH .....................................................................................................................................Low – 150/Hi – 220

CFM ..............................................................................................................................................................350

KNOW YOUR BLOWER/VAC

See Figure 1.

The safe use of this product requires an understanding of

the information on the tool and in this operator’s manual as

well as a knowledge of the project you are attempting. Before

use of this product, familiarize yourself with all operating

features and safety rules.

CORD RETAINER

A convenient cord retainer helps keep the extension cord

connection secure during blower/vac operation.

HIGH VELOCITY NOZZLE

The high velocity nozzle is great for wet sticky leaves. It

allows you to scrape wet leaves or debris while operating

the blower.

TOOLLESS ATTACHMENTS

The blower tube with high velocity nozzle, vacuum bag, and

vacuum tubes can be easily installed on the product without

any additional tools.

TWO-SPEED

The two-speed switch is designed for LOW or HI speeds.

ASSEMBLY

UNPACKING

This product requires assembly.

 Carefully remove the product and any accessories from

the box. Make sure that all items listed in the packing list

are included.

WARNING:

Do not use this product if any parts on the Packing List

are already assembled to your product when you unpack

it. Parts on this list are not assembled to the product by

the manufacturer and require customer installation. Use

of a product that may have been improperly assembled

could result in serious personal injury.

 Inspect the product carefully to make sure no breakage

or damage occurred during shipping.

 Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the product.

 If any parts are damaged or missing, please call

1-800-242-4672 for assistance.

PACKING LIST

Blower/Vac

Blower Tube with High Velocity Nozzle

Upper and Lower Vacuum Tubes

Vacuum Bag

Operator’s Manual

NOTE: Read and remove all hang tags and store with your

operator’s manual.

WARNING:

If any parts are damaged or missing do not operate this

product until the parts are replaced. Use of this product

with damaged or missing parts could result in serious

personal injury.

WARNING:

Do not attempt to modify this product or create acces-

sories not recommended for use with this product. Any

such alteration or modification is misuse and could result

in a hazardous condition leading to possible serious

personal injury.

WARNING:

Do not connect to power supply until assembly is com-

plete. Failure to comply could result in accidental starting

and possible serious personal injury.

Page 8 – English

ASSEMBLY

ASSEMBLING THE UNIT FOR BLOWER

OPERATION

See Figure 2.

To assemble the unit for blower operation:

 Slide blower tube onto blower housing until the button

on the blower housing clicks into the slot on the tube.

 To remove, depress the button on the blower housing

and remove the tube.

 The high velocity nozzle on the end of the blower tube can

be removed to allow a larger area to be covered during

blower operation. To remove, lift the flap and slide the

nozzle off. To reinstall, slide nozzle on tube until the tab

on the blower tube snaps into the slot on nozzle flap.

ASSEMBLING THE UNIT FOR VACUUM

OPERATION

See Figures 3 - 4.

To install the vacuum bag:

 Slide the vacuum bag inlet onto blower housing until the

button on the blower housing clicks into the slot on the

bag outlet.

To install the vacuum tubes:

 Secure the upper and lower vacuum tubes together by

aligning the raised tab on the lower tube with the slot

on the upper tube. Push the tubes together until the tab

snaps securely into the slot.

 Unlock the vacuum door by pushing the door latch away

from the door.

WARNING:

Rotating impeller blades can cause severe injury. Always

stop the motor, unplug the power cord from the power

source, and ensure impeller blades have stopped rotating

before opening the vacuum door or installing/changing

tubes. Do not put hands or any other object into the

vacuum tubes while they are installed on the unit. Failure

to follow these instructions can result in serious personal

injury.

 Open the vacuum door and hold open with your left

hand.

 Insert the side of the vacuum tube with the ribbed tab

into the slot in the catch on the door hinge side (opposite

the door latch).

 Secure the other side of the vacuum tube by pushing it into

the slot in the door latch and closing the door latch.

 Gently let go of the vacuum door until it rests against the

vacuum tube.

To remove the vacuum tubes:

 Open the door latch.

 Remove the ribbed tab from the catch opposite the door

latch and remove tube assembly.

 Close vacuum door and secure with door latch.

Page 9 – English

OPERATION

WARNING:

Do not allow familiarity with products to make you care-

less. Remember that a careless fraction of a second is

sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1, along with hearing protection.

Failure to do so could result in objects being thrown into

your eyes, resulting in possible serious injury.

WARNING:

Do not use any attachments or accessories not recom-

mended by the manufacturer of this product. The use of

attachments or accessories not recommended can result

in serious personal injury.

APPLICATIONS

You may use this product for the purposes listed below:

Clearing leaves and other debris from your lawn

Keeping decks and driveways free from leaves, pine

needles and other debris



Vacuuming leaves from your lawn

STARTING/STOPPING THE BLOWER/VAC

See Figures 5 - 6.



Attach the outlet end of an extension cord to the plug on

the rear of the blower/vac.

NOTE: Use only an approved outdoor extension cord as

described previously in this manual.

CAUTION:

Always use cord retainer to properly attach extension

cord to blower/vac. Failure to use cord retainer may result

in damage to blower/vac and/or extension cord.



Route the extension cord through the side of the loop

located on the rear of the blower/vac housing and place

underneath the cord retainer.



To start the blower/vac, place the power switch in the

1 (low) or 2 (high) position.



To stop the blower/vac, place the power switch in the

0 (off) position.

OPERATING THE BLOWER

See Figure 7.

WARNING:

Never run the unit without the blower tube installed or

the vacuum door securely closed. Use of an improperly

assembled unit could result in serious personal injury.

 To keep from scattering debris, blow around the outer

edges of a debris pile. Never blow directly into the center

of a pile.

 To reduce sound levels, limit the number of pieces of

equipment used at any one time.

 Use rakes and brooms to loosen debris before blowing.

In dusty conditions, slightly dampen surfaces when water

is available.

 Conserve water by using power blowers instead of hoses

for many lawn and garden applications, including areas

such as gutters, screens, patios, grills, porches, and

gardens.

 Watch out for children, pets, open windows, or freshly

washed cars, and blow debris safely away.

Hold the blower with the handle in your right hand. (Proper

operating position is shown in figure 7.)

Operate power equipment at reasonable hours only —

not early in the morning or late at night when people

might be disturbed. Comply with the times listed in local

ordinances.

Operate blower at the lowest possible speed to do the

job.

 After using blowers or other equipment, CLEAN UP!

Dispose of debris properly.

WARNING:

Do not place blower on top of or near loose debris. Debris

may be sucked into blower intake vent and thrown at the

operator or bystanders, causing possible serious injuries

or resulting in possible damage to the unit.

Page 10 – English

VACUUM OPERATION

See Figure 8.

WARNING:

Never run the unit without the vacuum tubes and vacuum

bag installed. Use of an improperly assembled unit could

result in serious personal injury.

 Install the vacuum tubes and bag. Refer to the Assembly

section earlier in this manual.

 Place the vacuum bag strap over your shoulder and hold

the handle knobs in your hands. (Proper operating posi-

tion is shown in fig. 8.)

 Start the blower/vac. Refer to Starting and Stopping

earlier in this manual.

OPERATION

 Move the unit from side to side along outer edge of the

debris. To avoid clogging, do not place the vacuum tube

directly into the debris pile.

 Hold the motor higher than the inlet end of the vacuum

tube.

 Always point vacuum tube downhill when working on a

hillside.

 To avoid injury to the operator or unit, do not pick up

rocks, broken glass, bottles, any type of metal objects,

or other similar objects.

 If the vacuum tubes should clog, stop the motor, unplug

the power cord, and wait for all moving parts to stop

before cleaning out the obstruction. Remove the vacuum

tubes and clear the debris from the blower fan housing.

Remove the bag and clear the tube. A small rod or stick

may be required to clear the entire tube length. Ensure

that all debris has been cleared before reassembling the

vacuum tubes.

Page 11 – English

MAINTENANCE

WARNING:

When servicing, use only identical replacement parts.

Use of any other parts may create a hazard or cause

product damage.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1, along with hearing protection.

Failure to do so could result in objects being thrown into

your eyes, resulting in possible serious injury.

WARNING:

Before inspecting, cleaning, or servicing the machine,

unplug the power cord and wait for all moving parts to

stop. Failure to follow these instructions can result in

serious personal injury or property damage.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types of

commercial solvents and may be damaged by their use. Use

clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact

with plastic parts. Chemicals can damage, weaken or

destroy plastic, which may result in serious personal

injury.

STORAGE (1 MONTH OR LONGER)

 Unplug the power cord from the power source when

storing the unit.

 Clean all foreign material from the blower/vac.

 Store indoors in a place that is inaccessible to children.

Keep away from corrosive agents such as garden chemi-

cals and de-icing salts.

TROUBLESHOOTING

PROBLEM CAUSE REMEDY

Motor fails to start when switch is

turned on.

Power cord is not plugged in or con-

nection is loose.

Household circuit breaker is tripped.

Plug in the power cord.

Check circuit breaker.

CALL

www.homelite.com

CALL US FIRST

For any questions about operating or maintaining your product,

call the Homelite

®

Help Line!

Your product has been fully tested prior to shipment to ensure

your complete satisfaction.

Page 12 – English

ILLUSTRATED PARTS LIST

1 34115142G High Velocity Nozzle .................................................................................................. 1

2 31104145AG Blower Tube ............................................................................................................... 1

3 099964001901 Logo Label (Blower Tube) .......................................................................................... 1

4 099964001903 Icon Label .................................................................................................................. 1

5 099964001904 Logo Label ................................................................................................................. 1

6 09996400190 Data Label .................................................................................................................. 1

7 31118142AG Vacuum Bag .............................................................................................................. 1

8 31107145G Upper Vacuum Tube .................................................................................................. 1

9 34107142G Lower Vacuum Tube .................................................................................................. 1

10 099964001902 Logo Label (Upper Vacuum Tube) ............................................................................. 2

987000908 Operator’s Manual (Not Shown)

Key Part

No. Number Description Qty.

1

2

3

4

5

6

7

8

9

10

Page 13 – English

WARRANTY

LIMITED WARRANTY STATEMENT

Homelite Consumer Products, Inc., (“Homelite”) warrants

to the original retail purchaser that this HOMELITE brand

outdoor product is free from defect in material and

workmanship and agrees to repair or replace, at Homelite’s,

discretion, any defective product free of charge within these

time periods from the date of purchase.

 Two years for all models if used for personal, family, or

household use;

 90 days for any unit used for other purposes, such as

rental or commercial.

This warranty extends to the original retail purchaser

only and commences on the date of the original retail

purchase.

Any part of the this product manufactured or supplied

by Homelite and found in the reasonable judgment of

Homelite to be defective in material or workmanship will

be repaired or replaced without charge for parts and labor

by a Homelite authorized service center.

The product, including any defective part, must be returned

to an authorized service dealer within the warranty period.

The expense of delivering the product to the dealer for

warranty work and the expense of returning it back to the

owner after repair or replacement will be paid by the owner.

Homelite’s responsibility in respect to claims is limited to

making the required repairs or replacements and no claim

of breach of warranty shall be cause for cancellation or

rescission of the contract of sale of any HOMELITE brand

product. Proof of purchase will be required by the dealer

to substantiate any warranty claim. All warranty work must

be performed by a Homelite authorized service center.

This warranty is limited to ninety (90) days from the date of

original retail purchase for any HOMELITE brand product

that is used for rental or commercial purposes, or any other

income-producing purpose.

This warranty does not cover any HOMELITE brand product

that has been subject to misuse, neglect, negligence, or

accident, or that has been operated in any way contrary

to the operating instructions as specified in this operator’s

manual. This warranty does not apply to any damage to

the product that is the result of improper maintenance

or to any product that has been altered or modified. The

warranty does not extend to repairs made necessary

by normal wear or by the use of parts or accessories

which are either incompatible with the HOMELITE

brand product or adversely affect its operation,

performance, or durability. In addition, this warranty does

not cover:

A. Tune-ups – Spark Plugs, Carburetor, Carburetor

Adjustments, Ignition, Filters

B. Wear items – Bump Knobs, Outer Spools, Cutting

Lines, Inner Reels, Starter Pulleys, Starter Ropes, Drive

Belts, Tines, Felt Washers, Hitch Pins, Mulching Blades,

Blower Fans, Blower and Vacuum Tubes, Vacuum Bags

and Straps, Guide Bars, Saw Chains

Homelite reserves the right to change or improve

the design of any HOMELITE brand product without

assuming any obligation to modify any product previously

manufactured.

ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION

TO THE STATED WARRANTY PERIOD. ACCORDINGLY,

ANY SUCH IMPLIED WARRANTIES INCLUDING

MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, OR OTHERWISE, ARE DISCLAIMED IN

THEIR ENTIRETY AFTER THE EXPIRATION OF THE

APPROPRIATE TWO-YEAR, ONE-YEAR, OR NINETY-DAY

WARRANTY PERIOD. HOMELITE’S OBLIGATION UNDER

THIS WARRANTY IS STRICTLY AND EXCLUSIVELY

LIMITED TO THE REPAIR OR REPLACEMENT OF

DEFECTIVE PARTS AND HOMELITE DOES NOT ASSUME

OR AUTHORIZE ANYONE TO ASSUME FOR THEM ANY

OTHER OBLIGATION. SOME STATES DO NOT ALLOW

LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY

LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY

TO YOU. HOMELITE ASSUMES NO RESPONSIBILITY

FOR INCIDENTAL, CONSEQUENTIAL, OR OTHER

DAMAGES INCLUDING, BUT NOT LIMITED TO, EXPENSE

OF RETURNING THE PRODUCT TO AN AUTHORIZED

HOMELITE SERVICE CENTER AND EXPENSE OF

DELIVERING IT BACK TO THE OWNER, MECHANIC’S

TRAVEL TIME, TELEPHONE OR TELEGRAM CHARGES,

RENTAL OF A LIKE PRODUCT DURING THE TIME

WARRANTY SERVICE IS BEING PERFORMED, TRAVEL,

LOSS OR DAMAGE TO PERSONAL PROPERTY, LOSS

OF REVENUE, LOSS OF USE OF THE PRODUCT,

LOSS OF TIME, OR INCONVENIENCE. SOME STATES

DO NOT ALLOW THE EXCLUSION OR LIMITATION OF

INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE

ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY

TO YOU.

This warranty gives you specific legal rights, and you may

also have other rights which vary from state to state.

This warranty applies to all HOMELITE brand products

manufactured by or for Homelite and sold in the United

States and Canada.

To locate your nearest Homelite authorized service

center, dial 1-800-242-4672 or log on to our website at

www.homelite.com.

Page is loading ...

987000-908

11-25-09 (REV:01)

SERVICE

For parts or service, contact your nearest Homelite authorized service dealer. Be sure to provide all relevant informa-

tion when you call or visit. For the location of the authorized service dealer nearest you, please call 1-800-242-4672

or visit us online at www.homelite.com.

REPAIR PARTS

The model number of this product is found on a plate or label attached to the housing. Please record the serial num-

ber in the space provided below.

MODEL NO. _______________________________

SERIAL NO. _______________________________

DÉPANNAGE

Pour tout entretien ou réparation du produit, contacter le centre de réparations Homelite agréé le plus proche. Veiller

à fournir toutes les informations pertinentes lors de tout appel téléphonique ou visite. Pour obtenir l’adresse du centre

de réparations agréé le plus proche, téléphoner au 1-800-242-4672, ou visiter notre site www.homelite.com.

PIÈCES DE RECHANGE

Le numéro de modèle se trouve sur une plaquette ou étiquette placée sur le bâti. Noter le numéro de série dans

l’espace ci-dessous.

NUMÉRO DE MODÈLE ________________________

NUMÉRO DE SÉRIE ___________________________

SERVICIO

Para obtener piezas o servicio, comuníquese con el centro de servicio autorizado de Homelite más cercano. Asegúrese

de proporcionar todos los datos pertinentes al llamar o al presentarse personalmente. Para obtener información sobre

el establecimiento de servicio autorizado más cercano a usted, le suplicamos llamar al 1-800-242-4672 o visitar

nuestro sitio en la red mundial, en la dirección www.homelite.com.

PIEZAS DE REPUESTO

El número de modelo de este producto se encuentra en una placa o etiqueta pegada a la caja del motor. Le

recomendamos anotar el número de serie en el espacio suministrado abajo.

NÚMERO DE MODELO ________________________

NÚMERO DE SERIE _________________________

HOMELITE CONSUMER PRODUCTS, INC.

1428 Pearman Dairy Road, Anderson, SC 29625

1-800-242-4672 • www.homelite.com

UT42120

ELECTRIC BLOWER/VAC

SOUFFLANTE/ASPIRATEUR ÉLECTRIQUE

SOPLADORA/ASPIRADORA ELÉCTRICA

UT42120

ALL VERSIONS/TOUTES LES VERSIONS/

TODAS LAS VERSIONES

OPERATOR’S MANUAL

MANUEL D’UTILISATION

MANUAL DEL OPERADOR

UT42120

Homelite ut42100 User manual

Homelite ut42100 User manual

in other languages

Related papers

Other documents