Ryobi RY42110 User manual

Brand: Ryobi

Model: RY42110

Category: Air blowers/dryers

Type: User manual

Your blower/vacuum has been engineered and manufactured to our high standard for dependability, ease of operation, and

operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.

WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this

product. If you do not understand the warnings and instructions in the operator’s manual, do not use this product.

Cette soufflante / aspirateur a été conçue et fabriquée conformément

à nos strictes normes de fiabilité, simplicité d’emploi et sécurité

d’utilisation. Correctement entretenue, elle vous donnera des

années de fonctionnement robuste et sans problème.

AVERTISSEMENT : Pour réduire les risques de

blessures, l’utilisateur doit lire et veiller à bien comprendre

le manuel d’utilisation avant d’employer ce produit. Si tous

les avertissements et toutes les consignes de sécurités et

instructions du manuel d’utilisation ne sont pas bien compris,

ne pas utiliser ce produit.

Su sopladora / aspiradora ha sido diseñada y fabricada de

conformidad con las estrictas normas para brindar fiabilidad,

facilidad de uso y seguridad para el operador. Con el debido cuidado,

le brindará muchos años de sólido y eficiente funcionamiento.

ADVERTENCIA: Para reducir el riesgo de lesiones,

el usuario debe leer y comprender el manual del operador antes

de usar este producto. Guarde este manual del operador y

estúdielo frecuentemente para lograr un funcionamiento seguro

y continuo de este producto

CONSERVER CE MANUEL POUR

FUTURE RÉFÉRENCE

GUARDE ESTE MANUAL PARA

FUTURAS CONSULTAS

SAVE THIS MANUAL FOR FUTURE REFERENCE

OPERATOR’S MANUAL

MANUEL D’UTILISATION

MANUAL DEL OPERADOR

BLOWER / VACUUM

SOUFFLANTE / ASPIRATEUR

SOPLADORA / ASPIRADORA

RY42110

ALL VERSIONS

TOUTES LES VERSIONS

TODAS LAS VERSIONES

Page is loading ...

Fig.6

Fig. 5

A - Shoulder strap (bandoulière, correa para el

hombro)

B - Shoulder strap hook (shoulder strap hook,

shoulder strap hook)

Fig.8

A - Quick change lever (levier de changement

rapide,, palanca de cambio rápido)

B - Blower mode (blower mode, blower mode)

C - Vacuum / mulch mode (vacuum / mulch

mode, vacuum / mulch mode)

Fig.7

A - Variable speed control (commande de

vitesse variable, control de velocidad

variable)

B - Increase speed (pour augmenter la vitesse,

para aumentar velocidad)

C - Decrease speed (pour réduire la vitesse,

disminuya la velocidad)

A - Switch trigger (gâchette de commutateur,

gatillo del interruptor)

B - Cord retainer (cord retainer, cord retainer)

Fig.9

Fig.10

2 - English

INTRODUCTION

INTRODUCTION / INTRODUCCIÓN

This product has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability

have been given top priority in the design of this product making it easy to maintain and operate.

* * *

Ce produit offre de nombreuses fonctions destinées à rendre son utilisation plus plaisante et satisfaisante. Lors de la

conception de ce produit, l’accent a été mis sur la sécurité, les performances et la fiabilité, afin d’en faire un outil facile à

utiliser et à entretenir.

* * *

Este producto ofrece numerosas características para hacer más agradable y placentero su uso. En el diseño de este producto

se ha conferido prioridad a la seguridad, el desempeño y la fiabilidad, por lo cual se facilita su manejo y mantenimiento.

 Introduction ......................................................................................................................................................................2

Introduction / Introducción

 Important Safety Instructions ........................................................................................................................................3-4

Instructions importantes concernant la sécurité / Instrucciones de seguridad importantes

 Specific Safety Rules ........................................................................................................................................................ 4

Règles de sécurité particulières / Reglas de seguridad específicas

 Symbols ............................................................................................................................................................................ 5

Symboles / Símbolos

Electrical ........................................................................................................................................................................... 6

Caractéristiques électriques / Aspectos eléctricos

 Features ............................................................................................................................................................................7

Caractéristiques / Características

 Assembly .......................................................................................................................................................................7-8

Assemblage / Armado

 Operation ..................................................................................................................................................................... 9-10

Utilisation / Funcionamiento

 Maintenance ................................................................................................................................................................... 11

Entretien / Mantenimiento

 Troubleshooting .............................................................................................................................................................. 12

Dépannage / Solución de problemas

 Warranty ......................................................................................................................................................................... 13

Garantie / Garantía

 Parts Ordering and Service ...............................................................................................................................Back Page

Commande de pièces et réparation / Pedidos de piezas y servicio ......................................................... Page arrière / Pág. posterior

TABLE OF CONTENTS

TABLE DES MATIÈRES / ÍNDICE DE CONTENIDO

3 - English

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

Read and understand all instructions. Failure to follow

all instructions listed below may result in electric shock,

fire and/or serious personal injury.

READ THESE INSTRUCTIONS BEFORE USING

THIS BLOWER/VAC

Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases, or

dust. Power tools create sparks which may ignite the dust

or fumes.

To reduce the risk of electric shock, this tool has a po-

larized plug (one blade is wider than the other) and will

require the use of a polarized extension cord. The plug

will fit into a polarized extension cord only one way. If the

plug does not fit fully into the extension cord, reverse the

plug. If the plug still does not fit, obtain a correct polarized

extension cord. A polarized extension cord will require

the use of a polarized wall outlet. This plug will fit into the

polarized wall outlet only one way. If the plug does not fit

fully into the wall outlet, reverse the plug. If the plug still

does not fit, contact a qualified electrician to install the

proper wall outlet. Do not change the equipment plug,

extension cord receptacle, or extension cord plug in any

way.

Avoid body contact with grounded surfaces such as pipes,

radiators, ranges, and refrigerators. There is an increased

risk of electric shock if your body is grounded.

Don’t expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

Do not handle plug or tool with wet hands.

Use outdoor extension cords marked W-A, W, SW-A,

SOW-A, STW-A, STOW-A, SJW-A, SJTW-A, or SJTOW-A.

These cords are rated for outdoor use and reduce the risk

of electric shock.

Never allow children to operate the equipment. Never

allow adults to operate the equipment without proper

instruction.

 ■Weareyeprotectionwithsideshieldswhichismarkedto

comply with ANSI Z87.1, along with hearing protection

when operating this product.

Always use face or dust mask if operation is dusty.

Use extra care when cleaning on stairs.

Do not leave appliance plugged in. Unplug from outlet

when not in use and before servicing.

Do not expose to rain, store indoors.

Use only as described in this manual. Use only manufac-

turer’s recommended attachments.

Keep hair, loose clothing, fingers, and all body parts away

from openings and moving parts.

To reduce the risk of electric shock, this appliance has a

polarized plug (one blade is wider than the other). This

plug will fit in a polarized outlet only one way. If the plug

does not fit fully in the outlet, reverse the plug. If it still

does not fit, contact a qualified electrician to install the

proper outlet. Do not change the plug in any way.

Wear heavy long pants, long sleeves, boots, and gloves.

Avoid loose garments or jewelry that could get caught in

moving parts of the machine or its motor.

Do not force tool. Use the correct tool for your

application. The correct tool will do the job better and

safer at the rate for which it is designed.

Do not operate the equipment while barefoot or when

wearing sandals or similar lightweight footwear. Wear

protective footwear that will protect your feet and improve

your footing on slippery surfaces.

Do not use on steps, a ladder, roof top, tree, or other un-

stable support. Stable footing on a solid surface enables

better control of the blower/vac in unexpected situations.

Secure long hair so it is above shoulder level to prevent

entanglement in any moving parts.

Keep firm footing and balance. Do not overreach.

Overreaching can result in loss of balance.

Turn off all controls before unplugging.

Do not allow to be used as a toy. Close attention is nec-

essary when used by or near children.

 Avoid accidental starting. Be sure the power switch is

not on before plugging in. Turn off power switch before

unplugging.

Do not use tool if switch does not turn it on or off. Any

tool that cannot be controlled with the switch is danger-

ous and must be repaired.

Do not leave the tool when plugged in. Unplug from

the power outlet when not in use, before servicing, and

before storing the tool. Such preventative safety measures

reduce the risk of starting the tool accidentally.

■Keep all bystanders, children, and pets at least 50 ft.

away.

■Do not operate this unit when you are tired, ill, upset, or

under the influence of alcohol, drugs, or medication.

Do not operate in poor lighting.

■Keep all parts of your body away from any moving parts

and all hot surfaces of the unit.

Check the work area before each use. Remove all objects

such as rocks, broken glass, nails, wire, or string which

can be thrown or become entangled in the machine.

Never use blower/vac near fires, fireplaces, hot ashes,

barbecue pits, etc., which may cause fire to spread.

Do not pull or carry by cord, use cord as a handle, close

a door on a cord, or pull cord around sharp edges or

corners. Keep cord away from heated surfaces.

Do not pick up flammable or combustible liquids such as

gasoline or use in areas where they may be present.

4 - English

IMPORTANT SAFETY INSTRUCTIONS

Never use blower to spread chemicals, fertilizers, or any

other toxic substances. Spreading these substances could

result in serious injury to the operator or bystanders

Do not pick up anything that is burning or smoking such

as cigarette matches or hot ashes.

Do not unplug by pulling on cord. To unplug, grasp the

plug, not the cord.

Do not put any object into openings. Do not use with any

opening blocked; keep free of dust, lint, hair, and anything

that may reduce air flow.

Use only identical manufacturer’s replacement parts and

accessories. Use of any other parts may create a hazard

or cause product damage.

Do not use with damaged cord or plug. If appliance is

not working as it should, has been dropped, damaged,

left outdoors, or dropped into water, return it to a service

center.

In a double insulated appliance, two systems of insulation

are provided instead of grounding. No grounding means

is provided on a double insulated appliance, nor should

a means for grounding be added to the appliance.

Servicing a double insulated appliance requires extreme

care and knowledge of the system and should be done

only by qualified service personnel. Replacement parts

for a double insulated appliance must be identical to the

parts they replace.

For household use only.

SPECIFIC SAFETY INSTRUCTIONS

Make sure your extension cord is in good condition.

When using an extension cord, be sure to use one heavy

enough to carry the current your product will draw. A wire

gauge size (A.W.G.) of at least 14 is recommended for an

extension cord 25 feet or less in length. If in doubt, use

the next heavier gauge. The smaller the gauge number,

the heavier the cord. An undersized cord will cause a drop

in line voltage resulting in loss of power and overheating.

■Do not point the blower nozzle in the direction of people

or pets.

■Never place blower/vac on any surface, except a hard,

clean surface when motor is running. Gravel, sand, and

other debris can be picked up by the air inlet and thrown

at the operator or bystanders, causing possible serious

injuries.

When used as a blower, always install the blower tubes.

When used as a vacuum, always install the vacuum tubes

and vacuum bag. Make sure the vacuum bag is completely

zipped when the unit is running to avoid flying debris.

Do not operate vacuum without vacuum bag installed;

flying debris could cause serious injury. Always close

vacuum bag completely before operating.

Rotating impeller blades can cause severe injury. Stop

the engine before opening the vacuum door or installing/

changing tubes. Do not put hands or any other object into

the vacuum tubes while they are installed on the unit.

Avoid situations that could catch the vacuum bag on

fire. Do not operate near an open flame. Do not vacuum

warm ash from fireplaces, barbeque pits, brush piles, etc.

Do not vacuum discarded cigars or cigarettes unless the

cinders are completely cool.

When not in use, blower/vac should be stored indoors in

a dry, locked up place—out of the reach of children.

Maintain tool with care. Keep fan area clean for best

and safest performance. Follow instructions for proper

maintenance.

Do not attempt to clear clogs from tool without first

unplugging it.

 If the power supply cord is damaged, it must be replaced

only by the manufacturer or by an authorized service

center to avoid risk.

 Protect your lungs. Wear a face or dust mask if the

operation is dusty. Following this rule will reduce the risk

of serious personal injury.

Save these instructions. Refer to them frequently and

use them to instruct others who may use this power tool.

If you loan someone this power tool, loan them these

instructions also.

SAVE THESE INSTRUCTIONS

5 - English

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper

interpretation of these symbols will allow you to operate the product better and safer.

Safety Alert Indicates a potential personal injury hazard.

Read Operator’s Manual

To reduce the risk of injury, user must read and understand

operator’s manual before using this product.

Eye and Hearing Protection

Always wear eye protection with side shields marked to comply

with ANSI Z87.1, along with hearing protection.

Wet Conditions Alert Do not expose to rain or use in damp locations.

Discharge Outlet Elbow Never remove discharge outlet elbow.

Keep Bystanders Away Keep all bystanders at least 50 ft. away.

Long Hair

Failure to keep long hair away from the air inlet could result in

personal injury.

Blower Tubes Do not operate without tubes in place.

Loose Clothing

Failure to keep loose clothing from being drawn into air intake

could result in personal injury.

V Volts Voltage

A Amperes Current

Hz Hertz Frequency (cycles per second)

W Watt Power

min Minutes Time

Alternating Current Type of current

Direct Current Type or a characteristic of current

Class II Tool Double-insulated construction

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL SIGNAL MEANING

DANGER: Indicates an imminently hazardous situation, which, if not avoided, will

result in death or serious injury.

WARNING: Indicates a potentially hazardous situation, which, if not avoided, could

result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may

result in minor or moderate injury.

CAUTION: (Without Safety Alert Symbol) Indicates a situation that may result in

property damage.

SYMBOL NAME

DESIGNATION/EXPLANATION

6 - English

DOUBLE INSULATION

Double insulation is a concept in safety in electric power

tools, which eliminates the need for the usual three-

wire grounded power cord. All exposed metal parts are

isolated from the internal metal motor components with

protecting insulation. Double insulated tools do not need

to be grounded.

WARNING:

The double insulated system is intended to protect

the user from shock resulting from a break in the tool’s

internal insulation. Observe all normal safety precautions

to avoid electrical shock.

NOTE: Servicing of a product with double insulation requires

extreme care and knowledge of the system and should be

performed only by a qualified service technician. For service,

we suggest you return the tool to your nearest authorized

service center for repair. Always use original factory replace-

ment parts when servicing.

ELECTRICAL CONNECTION

This product has a precision-built electric motor. It should

be connected to a power supply that is 120 volts, AC only

(normal household current), 60 Hz. Do not operate this

product on direct current (DC). A substantial voltage drop

will cause a loss of power and the motor will overheat. If

your product does not operate when plugged into an outlet,

double-check the power supply.

GFCI

Ground Fault Circuit Interrupter (GFCI) protection should be

provided on the circuit(s) or outlet(s) to be used for the prod-

uct. Receptacles are available having built-in GFCI protection

and may be used for this measure of safety.

EXTENSION CORDS

When using a power product at a considerable distance from

a power source, be sure to use an extension cord that has

the capacity to handle the current the product will draw. An

undersized cord will cause a drop in line voltage, resulting in

overheating and loss of power. Use the chart to determine

the minimum wire size required in an extension cord. Only

round jacketed cords listed by Underwriter’s Laboratories

(UL) should be used.

When working outdoors with a product, use an extension

cord that is designed for outside use. This type of cord is

designated with “W-A” or “W” on the cord’s jacket.

Before using any extension cord, inspect it for loose or

exposed wires and cut or worn insulation.

**Ampere rating (on product data plate)

0-2.0 2.1-3.4 3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0

Cord Length Wire Size (A.W.G.)

25´ 16 16 16 16 14 14

50´ 16 16 16 14 14 12

100´ 16 16 14 12 10 —

**Used on 12 gauge - 20 amp circuit.

NOTE: AWG = American Wire Gauge

WARNING:

Keep the extension cord clear of the working area.

Position the cord so that it will not get caught on lumber,

tools, or other obstructions while you are working with

a power tool. Failure to do so can result in serious per-

sonal injury.

WARNING:

Check extension cords before each use. If damaged

replace immediately. Never use product with a damaged

cord since touching the damaged area could cause elec-

trical shock resulting in serious injury.

ELECTRICAL

7 - English

FEATURES

KNOW YOUR BLOWER/VACUUM

See Figure 1.

The safe use of this product requires an understanding of

the information on the tool and in this operator’s manual as

well as a knowledge of the project you are attempting. Before

use of this product, familiarize yourself with all operating

features and safety rules.

BLOWER/VAC TUBE

The blower/vac tube can be easily installed on the blower

without any additional tools.

VACUUM BAG

The vacuum bag attaches easily to the blower/vac.

CORD RETAINER

A convenient cord retainer helps keep the extension cord

connection secure during blower operation.

VACUUM/MULCHER

Converting the blower to a vacuum/mulcher is simple and

can be done using the quick change lever.

VACUUM HANDLE

This feature allows user to perform vacuuming duties

comfortably.

VARIABLE SPEED CONTROL

The vairiable speed control allows you to easily select tool

speed.

UNPACKING

This product requires assembly.



Carefully remove the product and any accessories from

the box. Make sure that all items listed in the packing list

are included.

WARNING:

Do not use this product if any parts on the Packing List

are already assembled to your product when you unpack

it. Parts on this list are not assembled to the product by

the manufacturer and require customer installation. Use

of a product that may have been improperly assembled

could result in serious personal injury.



Inspect the product carefully to make sure no breakage

or damage occurred during shipping.

ASSEMBLY



Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the product.



If any parts are damaged or missing, please call

1-800-860-4050 for assistance.

PACKING LIST

Blower/Vacuum Motor Housing

Blower/Vac Tube

Vacuum Bag

Shoulder Strap

Operator’s Manual

NOTE: Read and remove all hang tags and store with your

operator’s manual.

PRODUCT SPECIFICATIONS

Weight ..........................................................................................................................................................................12 lbs.

Input .....................................................................................................................................120 V, AC only, 60 Hz, 12 Amps

Air Velocity: MPH ..............................................................................................................................................................200

CFM ..............................................................................................................................................................330

8 - English

ASSEMBLY

WARNING:

If any parts are damaged or missing do not operate this

product until the parts are replaced. Use of the product

with damaged or missing parts could result in possible

serious personal injury.

WARNING:

Do not attempt to modify this product or create acces-

sories not recommended for use with this product. Any

such alteration or modification is misuse and could result

in a hazardous condition leading to possible serious

personal injury.

WARNING:

To prevent accidental starting that could cause serious

personal injury, always disconnect the engine spark plug

wire from the spark plug when assembling parts.

WARNING:

To prevent accidental starting that could cause serious

personal injury, always disconnect the engine spark plug

wire from the spark plug when assembling parts.

ATTACHING AND EXTENDING THE

BLOWER/VAC TUBE

See Figures 2 - 3.



Slide the blower/vac tube into the motor housing.



Latch into place. Be sure the latches are closed and the

tube and motor housing are securely together.



Push the tube lock button down and pull the lower tube

out of the upper tube by holding the front bracket to fully

telescope the tube out. You will hear a “click” sound when

the tubes are fully extended and locked into place.

ATTACHING AND REMOVING THE

VACUUM BAG

See Figure 4.

WARNING:

Never run the unit without the vacuum tube and vacuum

bag installed. Use of an improperly assembled unit could

result in serious personal injury.



Slide opening of the plastic bracket on the vacuum bag

over the discharge outlet on the bottom of the motor

housing.



Pull the tab on the plastic bracket out and push plastic

bracket and vacuum bag onto motor housing. Let tab

lock into slot on motor housing.



Push clip, located on front of vacuum bag, into vacuum

bag hook, on underside of blower/vac tube.



To remove the vacuum bag, pull the vacuum bag hook

slightly back and pull the vacuum bag clip out.

ATTACHING THE SHOULDER STRAP

See Figure 5.



Clip the shoulder strap into the shoulder strap hook on

the rear handle.



Adjust the shoulder strap so that it is in a comfortable

position for you.

9 - English

STARTING AND STOPPING

See Figure 7.

NOTE: For added safety, your blower/vac has double safety

switching. If the blower/vacuum tube is not properly con-

nected to the motor housing or the tubes are not fully ex-

tended and have not locked in place, the blower/vac will not

start. Check the troubleshooting guide later in this manual

for more information.

To start the blower/vac:



Attach the outlet end of an extension cord to the plug on

the cord at the rear of blower vac.

NOTE: Use only an approved outdoor extension cord as

described previously in this manual.



Route the extension cord through the side of the loop

located on the rear of the blower housing and place

underneath the cord retainer.

CAUTION:

Always secure extension cord to unit by using cord re-

tainer. Failure to use cord retainer may result in damage

to the unit and/or extension cord.



Connect the blower/vac to the power supply. The live tool

indicator will glow blue once the blower/vac is connected

to the electric power supply.



Pull the trigger to start the blower/vac.

To stop the blower/vac:



Release the trigger.

VARIABLE SPEED CONTROL

See Figure 8.

You can adjust the speed of the unit by turning the

variable speed control clockwise to increase speed or

counterclockwise to decrease speed.

WARNING:

Never run the unit without the vacuum tube and vacuum

bag installed. Use of an improperly assembled unit could

result in serious personal injury.

OPERATING THE BLOWER

See Figure 9.

 To keep from scattering debris, blow around the outer

edges of a debris pile. Never blow directly into the center

of a pile.

 To reduce sound levels, limit the number of pieces of

equipment used at any one time.

 Use rakes and brooms to loosen debris before blowing.

In dusty conditions, slightly dampen surfaces when water

is available.

OPERATION

WARNING:

Do not allow familiarity with this product to make you

careless. Remember that a careless fraction of a second is

sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1, along with hearing protection.

Failure to do so could result in objects being thrown into

your eyes and other possible serious injuries.

WARNING:

Never remove discharge outlet elbow. Removal of elbow

could result in contact with moving fan blades and cause

serious personal injuries.

APPLICATIONS

You may use this product for the purposes listed below:



Clearing leaves and other debris from your lawn



Keeping decks and driveways free from leaves and pine

needles



Vacuuming leaves from your lawn

SWITCHING BETWEEN BLOWER MODE AND

VACUUM MODE

See Figure 6.

WARNING:

Always ensure that your unit is switched off and has fully

stopped before changing the mode of operation. Do not

force the quick change lever. It should move smoothly

without resistance. If you encounter problems, discon-

nect from power supply and clean the lever mechanism.

For blower mode:



Switch the quick change lever DOWN so it points to the

blow symbol ( ).

For vacuum mode:



Switch the quick change lever UP so it points to the

vacuum symbol ( ).

10 - English

OPERATION

 Conserve water by using power blowers instead of hoses

for many lawn and garden applications, including areas

such as gutters, screens, patios, grills, porches, and

gardens.

 Watch out for children, pets, open windows, or freshly

washed cars, and blow debris safely away.

Hold the blower with the handle in your right hand.

Operate power equipment at reasonable hours only —

not early in the morning or late at night when people

might be disturbed. Comply with the times listed in local

ordinances.

 After using blowers or other equipment, CLEAN UP!

Dispose of debris properly.

OPERATING THE VACUUM

See Figure 10.

WARNING:

Never run the unit without the vacuum tube and vacuum

bag installed. Use of an improperly assembled unit could

result in serious personal injury.

 Switch the quick change lever UP so it points to the

vacuum symbol.

 Start the blower/vac. Refer to Starting and Stopping

earlier in this manual.

 Place the shoulder strap over your shoulder and hold the

handle knobs in your hands.

 Move the unit from side to side along outer edge of the

debris. To avoid clogging, do not place the vacuum tube

directly into the debris pile.

 Hold the motor higher than the inlet end of the vacuum

tube.

 Always point vacuum tube downhill when working on a

hillside.

 To avoid injury to the operator or unit, do not pick up

rocks, broken glass, bottles, any type of metal objects,

or other similar objects.

 If the blower/vacuum tube should clog, stop the motor,

unplug the power cord, and wait for all moving parts to

stop before cleaning out the obstruction. Remove the

vacuum tube and clear the debris from the blower fan

housing. Remove the vacuum bag and clear the tube. A

small rod or stick may be required to clear the entire tube

length. Ensure that all debris has been cleared before

reassembling the vacuum tubes.

EMPTYING THE VACUUM BAG

It is not necessary to remove the vacuum bag from the

blower/vac when the bag needs to be emptied. The rear side

of the bag has a full length zipper to open it for emptying.

Simply open the zipper and empty the contents. Be sure to

close the zipper prior to operating the blower.

11 - English

WARNING:

When servicing, use only identical replacement parts.

Use of any other parts may create a hazard or cause

product damage.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1, along with hearing protection.

Failure to do so could result in objects being thrown into

your eyes and other possible serious injuries.

WARNING:

Before inspecting, cleaning, or servicing the machine,

shut off engine, wait for all moving parts to stop, and

disconnect spark plug wire and move it away from spark

plug. Failure to follow these instructions can result in

serious personal injury or property damage.

MAINTENANCE

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types of

commercial solvents and may be damaged by their use. Use

clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact

with plastic parts. Chemicals can damage, weaken or

destroy plastic, which may result in serious personal

injury.

STORAGE (1 MONTH OR LONGER)

 Clean all foreign material from the blower.

 Store indoors in a place that is inaccessible to children.

Keep away from corrosive agents such as garden chemi-

cals and de-icing salts.

CALL US FIRST

For any questions about operating or maintaining your product,

call the Ryobi® Help Line!

Your product has been fully tested prior to shipment to ensure

your complete satisfaction.

12 - English

TROUBLESHOOTING

PROBLEM CAUSE REMEDY

Motor won’t start Lower tube hasn’t been telescoped

out to its full length

No power (power failure)

Connection lead wire defect

Motor or switch defect

Pull the lower tube out to its full

length.

Check circuit breaker.

Check fuse

Check circuit breaker.

Replace lead or have lead checked

(electrician); never use defective lead.

Contact the authorized service center.

Material is not sucked in properly (re-

duced vacuuming power)

Machine is clogged or blocked

Vacuum bag too full

Speed setting too low

Clean tool

Empty bag

Adjust to higher speed

IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM, CONTACT YOUR AUTHORIZED SERVICING DEALER.

13 - English

WARRANTY

LIMITED WARRANTY STATEMENT

Techtronic Industries North America, Inc., warrants to the

original retail purchaser that this RYOBI® brand outdoor

product is free from defect in material and workmanship

and agrees to repair or replace, at Techtronic Industries

North America, Inc.’s, discretion, any defective product

free of charge within these time periods from the date of

purchase.

 Three years if the product is used for personal, family

or household use;

 90 days, if used for any other purpose, such as

commercial or rental.

This warranty extends to the original retail purchaser

only and commences on the date of the original retail

purchase.

Any part of this product found in the reasonable judgment

of Techtronic Industries North America, Inc. to be defective

in material or workmanship will be repaired or replaced

without charge for parts and labor by an authorized service

center for RYOBI® brand outdoor products (Authorized

Ryobi Service Center).

The product, including any defective part, must be returned

to an authorized Ryobi service center within the warranty

period. The expense of delivering the product to the service

center for warranty work and the expense of returning it

back to the owner after repair or replacement will be paid

by the owner. Techtronic Industries North America, Inc.’s,

responsibility in respect to claims is limited to making the

required repairs or replacements and no claim of breach of

warranty shall be cause for cancellation or rescission of the

contract of sale of any RYOBI® brand outdoor product. Proof

of purchase will be required by the dealer to substantiate

any warranty claim. All warranty work must be performed

by an authorized service dealer.

This warranty is limited to ninety (90) days from the date

of original retail purchase for any RYOBI® brand outdoor

product that is used for rental or commercial purposes, or

any other income-producing purpose.

This warranty does not cover any product that has been

subject to misuse, neglect, negligence, or accident, or that

has been operated in any way contrary to the operating

instructions as specified in this operator’s manual. This

warranty does not apply to any damage to the product that

is the result of improper maintenance or to any product

that has been altered or modified. The warranty does not

extend to repairs made necessary by normal wear or by the

use of parts or accessories which are either incompatible

with the RYOBI® brand outdoor product or adversely affect

its operation, performance, or durability. In addition, this

warranty does not cover:

A. Tune-ups – Spark Plugs, Carburetor, Carburetor

Adjustments, Ignition, Filters

B. Wear items – Bump Knobs, Outer Spools, Cutting

Lines, Inner Reels, Starter Pulleys, Starter Ropes, Drive

Belts, Tines, Felt Washers, Hitch Pins, Mulching Blades,

Blower Fans, Blower and Vacuum Tubes, Vacuum Bag

and Straps, Guide Bars, Saw Chains

Techtronic Industries North America, Inc., reserves the

right to change or improve the design of any RYOBI® brand

outdoor product without assuming any obligation to modify

any product previously manufactured.

ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION

TO THE STATED WARRANTY PERIOD. ACCORDINGLY,

ANY SUCH IMPLIED WARRANTIES INCLUDING

MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, OR OTHERWISE, ARE DISCLAIMED IN

THEIR ENTIRETY AFTER THE EXPIRATION OF THE

APPROPRIATE TWO-YEAR, ONE-YEAR, OR NINETY-

DAY WARRANTY PERIOD. TECHTRONIC INDUSTRIES

NORTH AMERICA, INC.’S, OBLIGATION UNDER THIS

WARRANTY IS STRICTLY AND EXCLUSIVELY LIMITED TO

THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS

AND TECHTRONIC INDUSTRIES NORTH AMERICA,

INC., DOES NOT ASSUME OR AUTHORIZE ANYONE

TO ASSUME FOR THEM ANY OTHER OBLIGATION.

SOME STATES DO NOT ALLOW LIMITATIONS ON HOW

LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE

LIMITATION MAY NOT APPLY TO YOU. TECHTRONIC

INDUSTRIES NORTH AMERICA, INC., ASSUMES NO

RESPONSIBILITY FOR INCIDENTAL, CONSEQUENTIAL,

OR OTHER DAMAGES INCLUDING, BUT NOT LIMITED

TO, EXPENSE OF RETURNING THE PRODUCT TO AN

AUTHORIZED RYOBI SERVICE CENTER AND EXPENSE

OF DELIVERING IT BACK TO THE OWNER, MECHANIC’S

TRAVEL TIME, TELEPHONE OR TELEGRAM CHARGES,

RENTAL OF A LIKE PRODUCT DURING THE TIME

WARRANTY SERVICE IS BEING PERFORMED, TRAVEL,

LOSS OR DAMAGE TO PERSONAL PROPERTY, LOSS

OF REVENUE, LOSS OF USE OF THE PRODUCT,

LOSS OF TIME, OR INCONVENIENCE. SOME STATES

DO NOT ALLOW THE EXCLUSION OR LIMITATION OF

INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE

ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY

TO YOU.

This warranty gives you specific legal rights, and you may

also have other rights which vary from state to state.

This warranty applies to all RYOBI® brand outdoor products

manufactured by or for Techtronic Industries North America,

Inc., and sold in the United States and Canada.

To locate your nearest Authorized Ryobi Service Center,

dial 1-800-860-4050.

Page is loading ...

• PIÈCES ET SERVICE

Avant de faire la demande de service ou l’achat de pièces de remplacement, veuillez obtenir le numéro de série du modèle à partir

de la plaque de données du produit.

• NUMÉRO DE MODÈLE ________________________

  • NUMÉRO DE SÉRIE ________________________

• COMMENT OBTENIR LES PIÈCES DE REMPLACEMENT :

Les pièces de remplacement peuvent être achetées en ligne sur le site www.ryobitools.com ou par téléphone au 1-800-525-2579.

Les pièces de remplacement peuvent être obtenues à un de nos centres de service autorisés.

• COMMENT TROUVER UN CENTRE DE SERVICE AUTORISÉ :

Les centres de service autorisés peuvent être localisés en ligne au www.ryobitools.com ou en téléphonant au 1-800-525-2579.

• COMMENT OBTENIR DE L’AIDE EN CONTACTANT LE SERVICE À LA CLIENTÈLE :

Pour contacter le service à la clientèle pour une question technique ou pour tout autre renseignement, veuillez nous téléphoner

au 1-800-525-2579.

• PARTS AND SERVICE

Prior to requesting service or purchasing replacement parts, please obtain your model and serial number from the product

data plate.

 • MODELNUMBER _______________________

 • SERIALNUMBER _______________________

• HOW TO OBTAIN REPLACEMENT PARTS:

Replacement parts can be purchased online at www.ryobitools.com or by calling 1-800-525-2579.

Replacement parts can also be obtained at one of our Authorized Service Centers.

• HOW TO LOCATE AN AUTHORIZED SERVICE CENTER:

Authorized Service Centers can be located online at www.ryobitools.com or by calling 1-800-525-2579.

• HOW TO OBTAIN CUSTOMER OR TECHNICAL SUPPORT:

To obtain Customer or Technical Support please contact us at 1-800-525-2579.

988000-162

7-8-10 (REV:02)

OPERATOR’S MANUAL

MANUEL D’UTILISATION / MANUAL DEL OPERADOR

ELECTRIC BLOWER / VACUUM

SOUFFLANTE / ASPIRATEUR ÉLECTRIQUE

SOPLADORA / ASPIRADORA ELÉCTRICO

RY42110

TECHTRONIC INDUSTRIES NORTH AMERICA, INC.

1428 Pearman Dairy Road, Anderson, SC 29625 USA

1-800-860-4050•www.ryobitools.com

RY42110

RYOBI® is a registered trademark of Ryobi Limited used under license.

RYOBI® est une marque déposée de Ryobi Limited utilisée sous licence.

RYOBI® es una marca comercial registrada de Ryobi Limited y es empleada mediante autorización.

• PIEZAS DE REPUESTO Y SERVICIO

Antes de solicitar servicio técnico o comprar piezas de repuesto, obtenga su modelo y número de serie de la placa de datos del

producto.

• NÚMERO DE MODELO _________________________

  • NÚMERO DE SERIE _________________________

• CÓMO OBTENER PIEZAS DE REPUESTO:

Las piezas de repuesto se pueden comprar en nuestro sitio en la red mundial, en la dirección www.ryobitools.com o llamando al

1-800-525-2579. Las piezas de repuesto también se pueden obtener en uno de nuestros Centros de Servicio Autorizados.

• CÓMO LOCALIZAR UN CENTRO DE SERVICIO AUTORIZADO:

Puede encontrar los Centros de Servicio Autorizados visitando nuestro sitio en la red mundial, en la dirección www.ryobitools.

com o llamando al 1-800-525-2579.

• CÓMO OBTENER SERVICIO O ASISTENCIA TÉCNICA AL CONSUMIDOR:

Para obtener Servicio o Asistencia Técnica al Consumidor, sírvase comunicarse con nosotros llamando al 1-800-525-2579.

RY42110

Ryobi RY42110 User manual

Brand: Ryobi

Model: RY42110

Category: Air blowers/dryers

Type: User manual

Download PDF

report

in other languages

français: Ryobi RY42110 Manuel utilisateur
español: Ryobi RY42110 Manual de usuario

Ryobi RY42110 User manual

Ryobi RY42110 User manual

in other languages

Related papers

Other documents