Weld Results Main Menu Weld Setup Graphs
/#
1
2 3
4 5
6
7
8
9
0
INC
DEC
ESC ENT
+
-
ABC
DEF
GHI JKL
MNO
PQR
STU VWX
YZ
.
FREQ OFFSET
Current Value
New Value
Min Value
Max Value
+0
+400
-
Freq Offset[Hz]
+0
Weld Results Main Menu Weld Setup
Graphs
Graphs
Pg1of2
Weld Results
Main Menu
Weld Setup Graphs
WELD SETUP Pg1of3
Weld Results Main Menu Weld Setup Graphs
Weld Results
RUN:TIME = 1.000
Preset1 Tm=1.000s
Cycle#
Time
(s)
*Pk Pwr
(%)
*Energy
(J)
Freq Chg
(Hz)
18 1.000 50 160.9 2
17 1.000 51 162.1 1
12 1.000 64 152.3 1
13 1.000 57 163.1 1
16 1.000 52 161.8 3
15 1.000 50 163.4 -1
14 1.000 55 163.2 -1
POWER
Press to turn the
system On and Off.
The button depresses
and it lights to indicate
power is On.
POWER LEVEL % INDICATOR
Indicates the power used either during the
last weld cycle or when TEST is running.
RESET
Press to reset
Alarms.
TEST
Press to display a
menu to test the
ultrasonic power supply,
horn, booster, and
converter.
NUMERIC KEYPAD
Used for numeric and alphanumeric entry of
values for selected parameters.
In Numeric mode, INC (+), and DEC (-) become
inactive when a number digit is pressed. Once
the INC or DEC buttons are pressed, the number
digits are inactive. The INC or DEC will increment
or decrement the Current Value field by 1 each
time it is pressed.
GRAPHS
Access graphs to view
or print from this menu.
ENT
Touching ENT will
close the pop-up and
return you to the Weld
Setup screen.
ESC
Touching ESC will
erase all digits in the
in the New Value field.
TOUCH SCREEN
On power up, after the Windows OS is loaded, the
the Language Selection screen will be displayed.
Here you may select the language to be displayed on
the Power Supply menus. The Visual Quality screen
will be shown briefly. Then either the Weld Results or
Main Menu screen will be displayed. The screen
displayed is chosen in System Configuration >Start
Screen. All other menus are accessed from the
Navigation Buttons at the bottom of all screens.
MAIN MENU
Use this menu to
access all functions
on the Main Menu.
(shown above)
WELD SETUP
Use this menu to
access the 3 pages
of parameters on the
Weld Setup Menu.
20 %
100 %
80 %
60 %
40 %
0 %
Reset
Test
*Applies to 2000X ea only
2000X ea/t Touch Screen
Quick Start User Guide v. 11.0 Rev. 5
EDP 100-412-175 March 2011
Copyright © Branson Ultrasonics Corp.
WELD RESULTS
Displays 4 parameters
from the last 7 weld
cycles to be monitored
from Weld Results screen.
View Graphs
*Auto Scale
*X Scale
Auto Refresh
Weld Results Main Menu Weld Setup
Main Menu Pg1of2
Graphs
Weld Setup
Diagnostics
System Configuration
Horn Down
System InformationScreen Setup
Weld History
View Current Setup
Weld Time = 0.567 s
*Amplitude > FIXED
Pretrigger > Off
Hold Time > Off
*Amplitude = 100%
Weld Mode > Time
Afterburst = 0.894 s
Column Setup
Pwr Match Curve > Off
energy
Print
>>
SERIES TOUCH SCREEN
QUICK START USER’S GUIDE
>>
energy / time
Weld Mode >
Hold Time =
Ext U/S Delay =
Amplitude =
Pretrigger >
Afterburst >
Energy Brake =
Post Weld Seek =
Frequency Offset >
Write In Fields >
Power Match Curve =
Save/Recall Presets =
Visual Quality Setup >
†Weld Time =
†Cycle Aborts >
†Timeout =
†Scrub Time =
†Scrub Amp =
Digital UPS >
*Amplitude >
*Control Limits >
*Suspect Limits >
*Reject Limits >
*†Weld Energy =
*†Peak Power =
Save/Recall Presets
Diagnostics
System Configuration
Horn Down
Print Menu
System Information
Screen Setup
Sequencing Presets
Print Now
Weld History
View Current Setup
Weld Setup
View Quality Screen
MAIN MENU
WELD SETUP
Units =
Password =
Start Screen =
RS232 >
USB Data =
Welder Addr =
Cycle Counter >
Gen Alarm Reset =
Time >
Date >
Beepers >
P/S Settings >
Amp. Control =
Act Settings >
Extra Cooling =
Ext Presets =
User I/O >
Bargraph Scales >
Digital Filter =
Freq Offset =
Column Setup >
Screen Setup >
Windows Setup
Hand Held
*Applies to 2000X ea only
†Availability dependant on Weld Mode
The “>” symbol indicates additional
sub-menus available.
2000X ea/t Touch Screen
Quick Start User Guide v. 11.0 Rev. 5
EDP 100-412-175 March 2011
Copyright © Branson Ultrasonics Corp.
Power Up
HORN DOWN
Digital Tune
Start Freq
Horn Signature
Cold Start
F Memory [ ]
F Actual [ ]
Run Seek
Clear Store
DIAGNOSTICS
PS Life =
Overloads =
Gen Alarm =
Frequency & Power=
P/S =
Actuator =
Control Level =
S/W Version =
P/S S/N =
SBC Version =
Welder Addr =
Cyl Stroke =
Cyl Dia =
View IP addr =
P/S Version =
P/S Presets =
SYSTEM INFO
Recall
Save
Clear
Verify
PRESETS
PRINT MENU
Printing =
Printer Offline
Abort Printing
Choose Printout >
Setup Printer >
Screen Alignment
Color Setup
SCREEN SETUP
Sequencing
Erase Sequence
Define/Edit Sequence
SEQUENCING
Setup
Weld Data
*Weld History
*Power Graph
*Amp Graph
*Freq Graph
PRINT NOW
Screen displays, (for the last 7 weld cycles),
the 4 parameters selected from Column
Setup in the Weld Results Screen.
Preset 0
Run Time 1.000
WELD RESULTS
OR
(Set Start Screen
in Sys Config)
SYS CONFIG
View Graphs
Auto Refresh
*Auto Scale
*X Scale
Power
Frequency
Amplitude
VIEW GRAPHS
The Power Supply will display the Language Selection screen at Power Up.
On this screen you may select the language to be displayed on the Power Supply menus.
GRAPHS
Basic Menu Map
Power Supply
ea/t
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Branson 2000Xd PS Owner's manual
-
-
-
-
-
-
-
-
-
Other documents
-
Emerson 2000X Quick start guide
-
-
Dukane 2120 User manual
-
-
-
-
-
-
-