Programmer
v.1.0
CODE: INTC
EN*
Version No: 1 of 08.06.2015
Supersedes the edition: ----------
www.pulsar.pl INTC
2
Features:
WiFi interface configuration: INTW, INTRW
Pooperation with the PowerConfig software
Powered from computer's USB port
Optical indication
Compact size
Warranty - 5 years from the production date
1. General description.
The programmer is designed to configure the INTW and INTRW Wi-Fi interfaces using the PowerConfig
software. The configuration of parameters is described in the instructions of each interface.
The figure below shows the INTC interface connection diagrams between WiFi interface and a PC.
Fig.1. Connection scheme during configuration of the INTW interface.
Fig.2. Connection scheme during configuration of the INTRW interface.
www.pulsar.pl INTC
3
2. Driver Installation.
To work properly, the "INTC" programmer requires installing the appropriate drivers in the operating system
of the computer. Once connected to computer USB port, the interface will be automatically detected by the
operating system and the driver installation will follow.
If the drivers are not detected by the system, it is suggested to download them from PULSAR website at
http://www.pulsar.pl/pliki/CDM v2.12.00 WHQL Certified.exe or from the chipset manufacturer's web site at:
http://www.ftdichip.com/FTDrivers.htm
After installing the drivers in the system, plug the interface into the USB port of your computer. An
additional COM port (e.g. COM5) associated with an interface and allowing the access to power supply will be
displayed. The assigned COM port can be checked in the Device Manager window (location: Start> Control Panel>
System> Hardware> Device Manager).
Fig. 3. The Device Manager window.
3. Technical parameters.
Power supply
5V DC from USB port of the computer
Current consumption
Max. 25mA from USB port of the computer
Transmission speed
Max. 115200 bauds, parity check
Optical indication
PWR – supply voltage indication (red LED)
Compliance of the USB interface
USB 1.1
USB 2.0 (Full Speed)
Interface cable length
1.5 m
USB cable length
1,7m
Protection class
IP20
Operating conditions
temperature -10
o
C ÷ 40
o
C
relative humidity 20%...90%
Dimensions (LxWxH)
57 x 32 x 25 [mm]
Net/gross weight
0,13kg / 0,18kg
Storage temperature
-20ºC...+60ºC
www.pulsar.pl INTC
4
Pulsar
Siedlec 150, 32-744 Łapczyca, Poland
Phone (+48) 14-610-19-40, Fax. (+48) 14-610-19-50
http:// www.pulsar.pl, www.zasilacze.pl
WEEE LABEL
According to the EU WEE Directive – it is required not to dispose of electric or electronic waste as unsorted municipal waste and to collect
such WEEE separately
WARRANTY
5 years from the production date.
WARRANTY VALID only upon presentation of the original
invoice.
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Pulsar INTRW - v1.1 User manual
-
-
-
-
-
-
-
-
-
