Xerox Regal 5790 Installation guide

Category
Print servers
Type
Installation guide

This manual is also suitable for

Getting Started
FIERY ZX-9
Copyright © 1998 Electronics for Imaging, Inc. All rights reserved.
This publication is protected by copyright, and all rights are reserved. No part of it may be reproduced or transmitted in any form or by any means for any purpose
without express prior written consent from Electronics for Imaging, Inc., except as expressly permitted herein. Information in this document is subject to change
without notice and does not represent a commitment on the part of Electronics for Imaging, Inc.
The software described in this publication is furnished under license and may only be used or copied in accordance with the terms of such license.
Patents: 5,666,436; 5,553,200; 5,543,940; 5,537,516; 5,517,334; 5,506,946;5,424,754; 5,343,311; 5,212,546; 4,941,038; 4,837,722; 4,500,919
Trademarks
EFI, the EFI logo, Fiery, the Fiery logo, EFICOLOR, and Rip-While-Print are trademarks registered in the U.S. Patent and Trademark Office. Fiery ZX, Fiery LX,
Fiery Driven, the Fiery Driven logo, Command WorkStation, AutoCal, Starr Compression, Memory Multiplier, ColorWise, NetWise, and VisualCal are
trademarks of Electronics for Imaging, Inc.
All Xerox product names mentioned in this publication are trademarks of the XEROX CORPORATION.
Adobe, the Adobe logo, Adobe Illustrator, PostScript, Adobe Photoshop, Adobe Separator, and Adobe PageMaker are trademarks of Adobe Systems Incorporated,
registered in certain jurisdictions. EPS (Encapsulated PostScript) is a trademark of Altsys Corporation. Apple, the Apple logo, AppleShare, AppleTalk, EtherTalk,
LaserWriter, and Macintosh are registered trademarks, and MultiFinder is a trademark of Apple Computer, Inc. Microsoft, MS, MS-DOS, and Windows are
registered trademarks of Microsoft in the US and other countries. QuarkXPress is a registered trademark of Quark, Inc. Times, Helvetica, and Palatino are
trademarks of Linotype AG and/or its subsidiaries. ITC Avant Garde, ITC Bookman, ITC Zapf Chancery, and ITC Zapf Dingbats are registered trademarks of
International Typeface Corporation. Ethernet is a registered trademark of Xerox Corporation. Farallon, PhoneNET PC, and PhoneNET Talk are trademarks of
Farallon Computing, Inc. COPS and COPSTalk are trademarks of CoOperative Printing Solutions, Inc. NetWare and Novell are registered trademarks and
Internetwork Packet Exchange (IPX) is a trademark of Novell, Inc. SyQuest is a registered trademark, in the United States and certain other countries, of SyQuest
Technology, Inc. UNIX is a registered trademark of UNIX System Laboratories, a wholly owned subsidiary of Novell, Inc. PANTONE is a registered trademark
of Pantone, Inc.
All other terms and product names may be trademarks or registered trademarks of their respective owners, and are hereby acknowledged.
Legal Notices
APPLE COMPUTER, INC. (“APPLE”) MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE APPLE SOFTWARE.
APPLE DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE
OF THE APPLE SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS, OR OTHERWISE. THE ENTIRE
RISK AS TO THE RESULTS AND PERFORMANCE OF THE APPLE SOFTWARE IS ASSUMED BY YOU. THE EXCLUSION OF IMPLIED
WARRANTIES IS NOT PERMITTED BY SOME STATES. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.
IN NO EVENT WILL APPLE, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE TO YOU FOR ANY CONSEQUENTIAL,
INCIDENTAL OR INDIRECT DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF
BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE THE APPLE SOFTWARE EVEN IF APPLE
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
Apples liability to you for actual damages from any cause whatsoever, and regardless of the form of the action (whether in contract, tort [including negligence],
product liability or otherwise), will be limited to $50.
Restricted Rights Legends
For defense agencies: Restricted Rights Legend. Use, reproduction, or disclosure is subject to restrictions set forth in subparagraph (c)(1)(ii) of the Rights in
Technical Data and Computer Software clause at 252.227.7013.
For civilian agencies: Restricted Rights Legend. Use, reproduction, or disclosure is subject to restrictions set forth in subparagraph (a) through (d) of the
commercial Computer Software Restricted Rights clause at 52.227-19 and the limitations set forth in Electronics for Imaging, Inc.s standard commercial
agreement for this software. Unpublished rights reserved under the copyright laws of the United States.
Printed in the United States of America on recycled paper.
Part Number:
n/a
CE Mark
The CE marking applied to this product symbolises Rank Xeroxs declaration of conformity with the following applicable directives of the European Union as of
the dates indicated.
January 1, 1996—Council Directive 70/80/CCO amended by Council Directive 93/68/EEO. Approximation of the laws of the member states related to low
voltage equipment.
January 1, 1996—Council Directive 59/336/EEC. Approximation of the laws of the member states related to electromagnetic compatibility.
A full declaration defining the relevant directives and referenced standards can be obtained from your Rank Xerox representative.
WARNING: In order to allow this equipment to operate in proximity to industrial, scientific, and Medical (ISM) equipment, the external radiation from
ISM equipment may have to be limited or special migration measures taken.
WARNING: This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to
take adequate measures.
FCC Information
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void
the user’s authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates,
and uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause interference in which case the user will be required to correct the interference
at his own expense.
Industry Canada Class A Notice
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard
entitled, “Digital Apparatus” ICES-003 from Industry Canada.
Avis de Conformation Classe A de l’Industrie Canada
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la Classe A prescrites dans la
norme sur le matériel brouilleur, “Appareils Numériques” NMB-003 édictée par l’Industrie Canada.
Certificate by Manufacturer/Importer
This is to certify that the FC07 is shielded against radio interference in accordance with the provisions of VFG 243/1991. The German Postal Services have been
advised that this device is being put on the market and that they have been given the right to inspect the series for compliance with the regulations.
Bescheinigung des Herstellers/Importeurs
Heirmit wird bescheinigt, dass der FC07 im Uebereinstimmung mit den Bestimmungen der VFG 243/1991 Funk-Entstort ist. Der Deutschen Bundespost wurde
das Inverkehrbringen dieses Geraetes angezeigt und die Berechtigung zur Ueberpruefung der Serie auf Einhaltung der Bestimmungen eingeraumt.
RFI Compliance Notice
This equipment has been tested concerning compliance with the relevant RFI protection requirements both individually and on system level (to simulate normal
operation conditions). However, it is possible that these RFI Requirements are not met under certain unfavorable conditions in other installations. It is the user
who is responsible for compliance of his particular installation.
Dieses Geraet wurde einzeln sowohl als auch in einer Anlage, die einen normalen Anwendungsfall nachbildet, auf die Einhaltung der Funk-entstoerbestimmungen
geprueft. Es ist jedoch moeglich, dass die Funk-enstoerbestimmungen unter unguenstigen Umstaenden bei anderen Geraetekombinationen nicht eingehalten
werden. Fuer die Einhaltung der Funk-entstoerbestimmungen seigner gesamten Anlage, in der dieses Geraet betrieben wird, ist der Betreiber verantwortlich.
Compliance with applicable regulations depends on the use of shielded cables. It is the user who is responsible for procuring the appropriate cables.
Einhaltung mit betreffenden Bestimmungen kommt darauf an, dass geschirmte Ausfuhrungen gebraucht werden. Fuer die beschaffung richtiger Ausfuhrungen ist
der Betreiber verantwortlich.
Software License Agreement
Before using the Software, please carefully read the following terms and conditions. BY USING THIS SOFTWARE, YOU SIGNIFY THAT YOU HAVE
ACCEPTED THE TERMS OF THIS AGREEMENT. If you cannot or do not accept these terms, you may return the entire package within ten (10) days to
the Distributor or Dealer from which you obtained them for a full refund.
Electronics for Imaging, Inc. grants to you a non-exclusive, non-transferable license to use the software and accompanying documentation (“Software”) included
with the Fiery ZX you have purchased, including without limitation the PostScript
®
software provided by Adobe Systems Incorporated.
You may:
a. use the Software solely for your own customary business purposes and solely with Fiery ZX;
b. use the digitally-encoded machine-readable outline and bitmap programs (“Font Programs”) provided with Fiery ZX in a special encrypted format (“Coded
Font Programs”) to reproduce and display designs, styles, weights, and versions of letters, numerals, characters and symbols (“Typefaces”) solely for your own
customary business purposes on the display window of the Fiery ZX or monitor used with Fiery ZX;
c. use the trademarks used by Electronics for Imaging to identify the Coded Font Programs and Typefaces reproduced therefrom (“Trademarks”); and
d. assign your rights under this Agreement to a transferee of all of your right, title and interest in and to Fiery ZX provided the transferee agrees to be bound by
all of the terms and conditions of this Agreement.
You may not:
a. make use of the Software, directly or indirectly, to print bitmap images with print resolutions of 600 dots per inch or greater, or to generate fonts or typefaces
for use other than with Fiery ZX;
b. make or have made, or permit to be made, any copies of the Software, Coded Font Programs, accompanying documentation or portions thereof, except as
necessary for use with the Fiery ZX unit purchased by you; provided, however, that under no circumstances may you make or have made, or permit to be made,
any copies of that certain portion of the Software which has been included on the Fiery ZX hard disk drive. You may not copy the documentation;
c. attempt to alter, disassemble, decrypt or reverse engineer the Software, Coded Font Programs or accompanying documentation.
d. rent or lease the Software.
Proprietary Rights
You acknowledge that the Software, Coded Font Programs, Typefaces, Trademarks and accompanying documentation are proprietary to Electronics for Imaging
and its suppliers and that title and other intellectual property rights therein remain with Electronics for Imaging and its suppliers. Except as stated above, this
Agreement does not grant you any right to patents, copyrights, trade secrets, trademarks (whether registered or unregistered), or any other rights, franchises or
licenses in respect of the Software, Coded Font Programs, Typefaces, Trademarks or accompanying documentation. You may not adapt or use any trademark or
trade name which is likely to be similar to or confusing with that of Electronics for Imaging or any of its suppliers or take any other action which impairs or reduces
the trademark rights of Electronics for Imaging or its suppliers. The trademarks may only be used to identify printed output produced by the Coded Font Programs.
At the reasonable request of Electronics for Imaging, you must supply samples of any Typeface identified with a trademark.
Confidentiality
You agree to hold the Software and Coded Font Programs in confidence, disclosing the Software and Coded Font Programs only to authorized users having a need
to use the Software and Coded Font Programs as permitted by this Agreement and to take all reasonable precautions to prevent disclosure to other parties.
Remedies
Unauthorized use, copying or disclosure of the Software, Coded Font Programs, Typefaces, Trademarks or accompanying documentation will result in automatic
termination of this license and will make available to Electronics for Imaging other legal remedies.
Limited Warranty And Disclaimer
Electronics for Imaging warrants that, for a period of ninety (90) days from the date of delivery to you, the Software under normal use will perform without
significant errors that make it unusable. Electronics for Imaging’s entire liability and your exclusive remedy under this warranty (which is subject to you returning
Fiery ZX to Electronics for Imaging or an authorized dealer) will be, at Electronics for Imaging’s option, to use reasonable commercial efforts to attempt to correct
or work around errors, to replace the Software with functionally equivalent software, or to refund the purchase price and terminate this Agreement. Some states
do not allow limitations on duration of implied warranty, so the above limitation may not apply to you.
Except for the above express limited warranty, Electronics for Imaging makes and you receive no warranties or conditions on the Products, express, implied, or
statutory, and Electronics for Imaging specifically disclaims any implied warranty or condition of merchantability or fitness for a particular purpose.
For warranty service, please contact your authorized service/support center.
EXCEPT FOR THE ABOVE EXPRESS LIMITED WARRANTY, ELECTRONICS FOR IMAGING MAKES AND YOU RECEIVE NO WARRANTIES
OR CONDITIONS ON THE SOFTWARE OR CODED FONT PROGRAMS, EXPRESS, IMPLIED, STATUTORY, OR IN ANY OTHER PROVISION
OF THIS AGREEMENT OR COMMUNICATION WITH YOU, AND ELECTRONICS FOR IMAGING SPECIFICALLY DISCLAIMS ANY IMPLIED
WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Electronics for Imaging does not warrant that
the operation of the software will be uninterrupted or error free or that the Software will meet your specific requirements.
Limitation Of Liability
IN NO EVENT WILL ELECTRONICS FOR IMAGING OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES, INCLUDING LOSS OF DATA, LOST
PROFITS, COST OF COVER OR OTHER SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES ARISING FROM THE USE OF
THE SOFTWARE, CODED FONT PROGRAMS OR ACCOMPANYING DOCUMENTATION, HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY. THIS LIMITATION WILL APPLY EVEN IF ELECTRONICS FOR IMAGING OR ANY AUTHORIZED DEALER HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE. YOU ACKNOWLEDGE THAT THE PRICE OF THE UNIT REFLECTS THIS ALLOCATION OF RISK.
BECAUSE SOME STATES/JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
Export Controls
You agree that you will not export or re-export the Software or Coded Font Programs in any form without the appropriate United States and foreign government
licenses. Your failure to comply with this provision is a material breach of this Agreement.
Government Use
Use, duplication or disclosure of the Software by the United States Government is subject to restrictions as set forth in subdivision (c) (1) (ii) of the Rights in
Technical Data and Computer Software clause at DFARS 252.227-7013 or in subparagraphs (c) (1) and (2) of the Commercial Computer Software—Restricted
Right Clause at 48 CFR 52.227-19, as applicable.
Third Party Beneficiary
You are hereby notified that Adobe Systems Incorporated, a California corporation located at 345 Park Avenue, San Jose, CA 95110-2704 (“Adobe”) is a third-
party beneficiary to this Agreement to the extent that this Agreement contains provisions which relate to your use of the Fonts, the Coded Font Programs, the
Typefaces and the Trademarks licensed hereby. Such provisions are made expressly for the benefit of Adobe and are enforceable by Adobe in addition to Electronics
for Imaging.
General
This Agreement will be governed by the laws of the State of California.
This Agreement is the entire agreement held between us and supersedes any other communications or advertising with respect to the Software, Coded Font
Programs and accompanying documentation.
If any provision of this Agreement is held invalid, the remainder of this Agreement shall continue in full force and effect.
If you have any questions concerning this Agreement, please write to Electronics for Imaging, Inc., Attn: Licensing Dept. or see Electronics for Imagings web site
at www.efi.com.
Electronics for Imaging, Inc.
2855 Campus Drive
San Mateo, CA 94403
Contents
Introduction
About the documentation
ix
Specifications
x
User software
xi
System requirements
xiii
Windows xiii
Mac OS xiv
UNIX (TCP/IP) xv
Parallel port xv
IPX (Novell) xvi
Command WorkStation xvi
Installing user software on a Windows computer
Installing Windows software
1
Downloading printer files with the Installer WebTool 2
Setting up the Fiery ZX as a PostScript printer
2
Setting up PostScript printing with Windows 95 3
Setting up PostScript printing with Windows 3.1x 17
Setting up PostScript printing with Windows NT 4.0 21
Installing utility, plug-in, and Command WorkStation software
31
Fiery Downloader and Fiery Print Calibrator 31
Fiery Spooler 33
Fiery Scan 34
Command WorkStation 35
Using the software for the first time
37
Configuring the connection for Fiery Downloader,
Fiery Print Calibrator, and the Command WorkStation 37
Configuring the connection for Fiery Spooler 40
Copying color files from the User Software CD
43
Installing the Fiery ZX ICM printer profile for Windows 95 44
Installing files for Adobe Photoshop 45
viii Table of Contents
Installing user software on a Mac OS computer
Installing Mac OS software
49
Downloading printer files with the Installer WebTool 50
Setting up the Fiery ZX as a PostScript printer
50
Setting up the Fiery ZX in the Chooser 51
Installing ColorSync, utility, and plug-in software
52
Screen fonts 55
Copying color files from the User Software CD
55
Installing files for Adobe Photoshop 56
Downloading Installers with the Fiery WebTools
Setting up the Fiery WebTools
61
Using the Installer WebTool
62
Troubleshooting
On a Windows computer
65
On a Mac OS computer
65
Index
ix About the documentation
This guide describes how to install the user software for the Fiery ZX-9 Color Server
TM
and set up printing from Microsoft
®
Windows
®
-based computers and Apple
®
Mac
®
OS-based computers. For information about setting up network servers and clients to
use the Fiery ZX-9 Color Server, see the
Configuration Guide
. For general information
on using the color copier, your computer, your application software, or your network,
see the manuals that accompany those products.
N
OTE
:
This manual uses the term “Fiery ZX” to refer to the Fiery ZX-9 Color Server.
Your Fiery ZX includes a media pack containing:
User Software CD
Command WorkStation
TM
CD
System Software CD
User Documentation CD
Printed Release Notes (described below)
Quick Start Notes
About the documentation
This manual is part of the set of Fiery ZX documentation, which includes the
following manuals for users and system administrators:
The
Configuration Guide
explains basic configuration and administration of the
Fiery ZX for the supported platforms and network environments. It also includes
guidelines for setting up UNIX
®
, Windows NT
®
, and Novell
®
NetWare
®
servers to
provide Adobe
®
PostScript
®
printing services to clients.
The
Printing Guide
describes the printing features of the Fiery ZX for users who
send jobs via remote workstations on the network or via a direct parallel port
connection.
Introduction
x Introduction
The
Color Guide
provides an introduction to the basics of color theory and printing
to a Fiery ZX Color Server. It also includes practical color printing tips and
application notes that explain how to print to the Fiery ZX from popular Windows
and Mac OS applications.
The
Job Management Guide
explains the functions of the Fiery client utilities,
including the Command WorkStation, and how they can be used to manage jobs
and maintain color quality. This book is intended for an operator or administrator,
or a user with the necessary access privileges, who needs to monitor and manage job
flow, perform color calibration, and troubleshoot problems that may arise.
Release Notes
provide last-minute product information and workarounds for some of
the problems you may encounter.
Specifications
The Fiery ZX has the following features:
DEC
®
Alpha 21164, 533 MHz CPU
256MB RAM
You may be able to add additional memory. Contact your authorized service
technician for information.
Internal 4GB hard disk drive
Internal 100MB removable cartridge Iomega Zip
®
drive (available as an optional kit)
Internal CD-ROM drive
Supports AppleTalk
®
, TCP/IP, and IPX protocols simultaneously
Supports parallel port communication
Supports thinnet (thin coaxial Ethernet
®
cable or 10Base2), thicknet (thick coaxial
Ethernet cable or 10Base5), and unshielded twisted pair (Fast Ethernet 100BaseTX
or Ethernet 10BaseT)
Supports Token Ring networking (available as an optional kit)
Supports Adobe PostScript 3
Includes 136 fonts (117 Adobe Type 1 PostScript and 19 TrueType
TM
)
xi User software
In addition, two Adobe Multiple Master fonts are included and are used for font
substitution in PDF files.
Built-in ColorWise
TM
color management and NetWise
TM
networking management
Fiery WebTools
TM
Fiery Downloader
TM
, Fiery Print Calibrator
TM
, and Fiery Spooler
TM
client utilities
Fiery Scan
TM
plug-in
User software
The full set of Fiery ZX user software is provided on the User Software CD and the
Command WorkStation CD. The Adobe PS Printer Driver and PPD files can also be
installed with the Installer WebTool.
Adobe PS Printer Driver Enables you to print to the Fiery ZX from Windows
and Mac OS computers; also supports all special
Fiery ZX print features and PostScript 3 features.
PostScript Printer Description
files (PPDs)
Files for use with the PS printer driver that allows
the Fiery ZX to appear in popular applications
Print and Page Setup dialog boxes. The Fiery ZX
PPD files provide information about the Fiery ZX
and your particular copier model to the application
and printer driver you are using to print.
PostScript Screen Fonts Screen fonts for the 136 PostScript printer fonts
installed on the Fiery ZX (117 Adobe Type 1 and 19
TrueType). See Appendix B of the
Printing Guide
for a complete list.
Fiery Downloader Enables you to print PostScript files, Encapsulated
PostScript (EPS) files, and Portable Document
Format (PDF) files directly to the Fiery ZX without
opening the application in which they were created.
The Fiery Downloader also enables you to manage
the printer fonts installed on the Fiery ZX.
Fiery Downloader is also installed with the
Command WorkStation software.
xii Introduction
Fiery Print Calibrator Enables you to calibrate the Fiery ZX remotely from
your computer. Proper calibration keeps color
consistent across time.
Fiery Print Calibrator is also installed with the
Command WorkStation software.
Fiery Spooler Enables you to view the order and priority of print
jobs, customize printer settings for jobs, delete jobs,
and move jobs between queues. You can also use it
to view job accounting information.
Fiery Scan Plug-in A TWAIN plug-in module for Photoshop that
enables you to scan images from the copier directly
into Photoshop.
Command WorkStation
(on Command WorkStation
CD)
Enables you to run the Command WorkStation
application from a remote workstation. For more
information on using the Command WorkStation,
see the
Job Management Guide
.
Color management files ColorSync and ICM color management files that
enable you to maintain consistent color from your
original artwork to the colors displayed on your
monitor to the printed output.
Color reference files Reference pages that you can print to view the range
of colors available on your Fiery ZX.
xiii System requirements
System requirements
To install the Fiery ZX user software on a Windows or Mac OS computer, the
computer must be equipped with a built-in or external CD-ROM drive.
Windows
To print to the Fiery ZX, you need:
A Windows-based computer with an 80486, AMD
®
, or Pentium
®
processor
Windows 95
®
, Windows 3.1x, or Windows NT 4.0
At least 4MB of RAM
To use the Fiery utilities (Fiery Downloader, Fiery Print Calibrator, and Fiery Spooler)
you also need:
Either
Windows 95
or
Windows NT 4.0 with NT Service Pack 3
At least 16MB of RAM
To use Fiery Scan, you also need Adobe Photoshop version 2.5 or later.
To use the Fiery WebTools, you also need:
Either
Netscape Communicator
TM
v4.0.3 with Java
TM
enabled
or
Microsoft Internet
Explorer
TM
v3.0.2 with Java enabled
N
OTE
:
Netscape and Microsoft continue to release frequent updates to their browsers.
As support cannot be guaranteed for all versions, use the versions specified above for
best results.
A monitor that supports 16-bit color at a minimum resolution of 600
x
800
A TCP/IP enabled network and the IP address or DNS name of the Fiery ZX
Web Services enabled on the Fiery ZX
N
OTE
:
The Fiery utilities and Fiery WebTools are not supported with Windows 3.1x.
xiv Introduction
With Microsoft Windows 95, you also need:
IPX/SPX or TCP/IP networking protocol installed
N
OTE
:
You must have TCP/IP networking protocol installed in order to use Fiery
Spooler; the Fiery Spooler is not supported over IPX/SPX.
Adobe PostScript Printer Driver for Windows version 4.2 or later (version 4.2.1 is
included with the user software)
With Microsoft Windows 3.1x, you also need:
IPX networking protocol installed
IPX/SPX networking software for IPX/SPX communication
MS-DOS
®
version 5.0 or later
Adobe PostScript Printer Driver for Windows version 3.0 or later (version 3.0.1 is
included with the user software)
With Microsoft Windows NT 4.0 you also need:
TCP/IP or AppleTalk networking protocol installed
The Windows PostScript Printer Driver that came with your Windows NT 4.0
system software; however, some Fiery ZX printing features may not be available. For
details, see the
Printing Guide
.
Mac OS
To print to the Fiery ZX you need:
A Mac OS-based computer
At least 8MB of RAM
EtherTalk
®
installed
Apple System software version 7.5 or later
Adobe PostScript Printer Driver version 8.5 or later (version 8.5.1 is included with
the user software)
xv System requirements
To use the Fiery utilities (Fiery Downloader, Fiery Print Calibrator, and Fiery Spooler),
you also need:
A Power Macintosh
®
computer
At least 16MB of RAM
To use Fiery Scan, you also need Adobe Photoshop version 2.5 or later.
To use the Fiery WebTools, you also need:
Netscape Communicator v4.0.3 or later with Java enabled
N
OTE
:
Netscape continues to release frequent updates to its browser. As support cannot
be guaranteed for all versions, use the version specified above for best results.
A TCP/IP enabled network and the IP address or DNS name of the Fiery ZX
Web Services enabled on the Fiery ZX
UNIX (TCP/IP)
To print to the Fiery ZX with a UNIX workstation, you need:
A workstation with standard TCP/IP connectivity (for example, Sun
®
SPARCstation
®
or Silicon Graphics
®
workstation with Solaris
®
version 2.x or SunOS
version 4.1.x software)
TCP/IP printing software that conforms to RFC1179 (Berkeley lpd protocol)
Parallel port
To print to the Fiery ZX using the parallel port, you need:
A Windows-based computer with an 80486, AMD, or Pentium processor
At least 4MB of RAM
The parallel cable included with the Fiery ZX
The cable has a DB-25 male connector (that connects to the computer) on one end
and a DB-25 female connector (that connects to the Fiery ZX) on the other.
xvi Introduction
IPX (Novell)
To use the Fiery ZX with an IPX (Novell) network, you need:
A Novell server
Novell NetWare software version 4.x or 3.x
Support for Ethernet SNAP, Ethernet II, Ethernet 802.3, Ethernet 802.2,
Token Ring SNAP, or Token Ring
Command WorkStation
To run the Command WorkStation application from a remote workstation, you need:
A Windows-based computer with a 200 MHz Pentium processor
Windows NT 4.0 with NT Service Pack 3
TCP/IP networking protocol installed
PCI VGA interface card
At least 32MB of RAM
At least 2MB of video RAM
An 850MB IDE hard disk drive
•A 2
x CD-ROM drive
A 17" monitor that supports 16-bit color at a minimum resolution of 1024 x 768
1 Installing Windows software
This chapter describes installing software and setting up printing from a
Windows-based computer running Windows 95, Windows 3.1x, or Windows NT 4.0.
The general steps for installing the Fiery ZX software are:
Install the Adobe PostScript printer driver (Windows 95 and Windows 3.1x) or
Windows PostScript printer driver (Windows NT 4.0) and PostScript Printer
Description files (PPDs) (for all Windows systems)
Set up the printer driver to communicate with the Fiery ZX
For Windows 95 and Windows NT 4.0, install the Fiery utilities (Fiery Downloader,
Fiery Print Calibrator, and Fiery Spooler) and Fiery Scan plug-in
For Windows NT 4.0, install the Command WorkStation software
Configure the connection for Fiery Downloader, Fiery Print Calibrator, and the
Command WorkStation
Configure the connection for Fiery Spooler
Copy additional color reference and application files from the User Software CD as
needed
Installing Windows software
The Instalrs folder on the User Software CD contains the following installer folders:
Calib—Contains the Fiery Print Calibrator utility installer
Download—Contains the Fiery Downloader utility installer
PS_drvr—Contains the Adobe PostScript printer driver installer for Windows 95 or
for Windows 3.1x, and Fiery ZX PPD files for all Windows systems
Scan—Contains the TWAIN module installer, which enables you to use the
Fiery Scan plug-in for Adobe Photoshop
Spooler—Contains the Fiery Spooler utility installer
Installing user
software on a
Windows
computer
2 Installing user software on a Windows computer
In addition, the User Software CD contains various color files. These files must be
copied or installed from the CD and placed in the appropriate locations on your hard
disk (see “Copying color files from the User Software CD” on page 43).
ICM printer profiles
Separation Tables and a monitor settings file for use with Adobe Photoshop
A sample calibration file
A PostScript CMYK reference file
A PostScript file of the PANTONE
®
Coated Color Reference Book
RGB color reference files for specifying colors from Microsoft Word and PowerPoint
The Command WorkStation software CD contains the Command WorkStation
software installer. For more information on using the Command WorkStation, see the
Job Management Guide.
Downloading printer files with the Installer WebTool
Installers for the Fiery ZX printer files can be downloaded from the Fiery ZX with the
Installer WebTool (if the site administrator has enabled Internet access to the
Fiery ZX). For instructions, see “Using the Installer WebTool” on page 62.
Once you download the installers, the installation process is identical to installing from
the User Software CD.
Setting up the Fiery ZX as a PostScript printer
To set up the Fiery ZX as a PostScript printer, you need a PostScript printer driver and
the appropriate Fiery ZX PPD file.
For Windows 95 or Windows 3.1x, install the appropriate Adobe PostScript printer
driver, included with the Fiery ZX user software. Both drivers are capable of
providing access to all Fiery ZX features; in addition, the Adobe PostScript printer
driver for Windows 95 supports PostScript 3.
For Windows NT systems, install the printer driver that came with your Windows
system software. This driver may not support all Fiery ZX features.
3 Setting up the Fiery ZX as a PostScript printer
This following procedures are specific to each version of Windows.
Setting up PostScript printing with Windows 95
You can use the following procedure whether you are installing from the User Software
CD or with installer files downloaded using the Installer WebTool.
NOTE: If you have problems setting up the Fiery ZX, install another PostScript printer
such as the Apple LaserWriter, and then install the Fiery ZX.
TO INSTALL THE ADOBE POSTSCRIPT PRINTER DRIVER FOR WINDOWS 95:
1. If you are installing from the CD, insert it into the CD-ROM drive and double-click the
icon of the CD.
If you are installing from the installer files you downloaded with the Installer
WebTool, double-click the icon of your hard disk drive.
2. If you are installing from the CD, open the English\Instalrs\Ps_drvr folders.
If you are installing from the installer files you downloaded with the Installer
WebTool, open the Prntdrv\Ps_drvr folders on your hard disk.
3. Open the Win_95 folder, and double-click the Setup.exe icon.
4. Read the End User License Agreement. If you agree with the terms and conditions of
the agreement, click Accept.
You must click Accept before setup can continue. If you click Decline, you are
prompted to either continue with setup or exit.
4 Installing user software on a Windows computer
5. Click Read to view the README file. When you are finished, close the README file and
click Next.
The information in this file is not specific to your Fiery ZX. You can click Next to
postpone reading this file and read it later.
6. If you are installing from the CD, you may see an Install Setup Program dialog box
offering you the option to copy the setup program to your hard disk. Make your choice
and then click Next.
Some printer files are installed to your hard disk.
7. In the Printer Type dialog box, select Local Printer and click Next.
This is a general installation. You can modify the attachment later, according to your
network type.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88

Xerox Regal 5790 Installation guide

Category
Print servers
Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI