Lantronix Open-Q 610 µSOM Development Kit Quick start guide

Type
Quick start guide
Open-Q
610 µSOM Development Kit
Quick Start Guide
Your use of this document is subject to and governed by those terms and conditions in the LICENSE AND PURCHASE TERMS AND CONDITIONS FOR INTRINSYC DEVELOPMENT PLATFORM KITS, which you or the legal entity you represent, as the case may be, accept-
ed and agreed to when purchasing a Development Kit from Intrinsyc Technologies Corporation (“Agreement”). You may use this document, which shall be considered part of the defined term “Documentation” for purposes of the Agreement, solely in support of your permitted use of
the Development Kit under the Agreement. Distribution of this document is strictly prohibited without the express written permission of Intrinsyc Technologies Corporation and its respective licensors, which they can withhold, condition or delay in its sole discretion. Lantronix is a
trademark of Lantronix, Inc., registered in the United States and other countries. Intrinsyc is a trademark of Intrinsyc Technologies Corporation, registered in Canada and other countries. Qualcomm® is a trademark of Qualcomm® Incorporated, registered in the United States and other
countries. Other product and brand names used herein may be trademarks or registered trademarks of their respective owners. Qualcomm QCS610 is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Package Contents
1. OpenQ™610µSOMwithQCS610processor
2. OpenQ™610µSOMCarrierBoard
3. ACDCPowerAdapter
4. LCD/Touchpanel(Oponal)
1. 12VDCpowerjack
2. Baeryconnector
3. Powersourceswitch(DC/Ba)
4. SOMcurrentsenseheader
5. AudioHeadsetJack
6. Powerbuon,Volume+buon,
Volume‐/Resetbuon,General
PurposeBuon
7. USB3.0TypeAConnector
8. STSensorExpansion
Board
9. USB3.0TypeCconnector
10. AudioI/Oexpansionheader
11. DisplayPort
12. AudioI/Oexpansionheader
13. USBdebugUARTMicroB
14. DebugUARTHeader
15. CameraAccessoryHeader
16. MIPICamera3Connector
17. PowerHeader
18. CoinCellBaeryHolder
19. Camera
AccessoryHeader
20. MIPICamera2Connector
21. CameraAccessoryHeader
22. MIPICamera1Connector
23. Systemconguraonheader
24. Systemconguraonswitches
25. RJ45GigabitLANconnector
26. SystemLEDs
27. VPH_PWRcurrentsenseheader
28. MicroSDsocket*
29. OpenQ™LCDTouchPanel
(oponal)
30. WLAN/BTAntenna(PCBtrace)
31. DigitalI/Oconnector
32. AudioOutputexpansionheader
33. AudioInputexpansionheader
34. WLAN/BTU.FLAntennaConnector
35. QCS610CPU
36. OpenQ610SystemonModule
(
µSOM)
*OnBoomside
Specifications are subject to change - 895-0041-00 Rev. A
1 2
3
5
7
9
14
15
16
19
20
21
22
8
17
18
23
24
2528 26
30
31
32
33
27
34
35
36
29
4
6
10
11
12
13
Open-Q
610 µSOM Development Kit
Quick Start Guide
Specifications are subject to change - 895-0041-00 Rev. A
Development Kit Setup
1. At a static-safe workstation, remove the development kit board
carefully from the anti static bag
2. Connect the Power Adapter to the 12V DC Jack (1) and then press and
hold the ON/OFF button (5) until you see the boot indicator LED lights
(~3 seconds)
3. Documentation and software
To access the documentation (schematics, user guides, datasheets,
programming guides, tech notes…), platform BSP software and much more,
please register at:
http://tech.intrinsyc.com
Development Kit Support
Should you require more information or assistance, you can contact us at:
https://www.intrinsyc.com/contact-support
Lantronix also provides technical information and videos on Qualcomm processors at:
https://www.intrinsyc.com/resources
Should you require additional technical support for your Development Kit you can
easily purchase a technical support package from the Lantronix store:
http://shop.intrinsyc.com/collections/technical-support-packages
Thank you for purchasing the Open-Q 610 µSOM Development Kit
The Lantronix Team
  • Page 1 1
  • Page 2 2

Lantronix Open-Q 610 µSOM Development Kit Quick start guide

Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI