Welcome to Better Air
Congratulations on choosing to substantially
improve your Indoor Air Quality while protecting
yourself, your family, your clients, your co-work-
ers and your employees with the new and in-
novative BA 008 Ecological Balancing System.
BA 008 delivers an all-natural probiotic formula
that creates a healthy indoor environment that
protects all the inhabitants from most causes of
allergies and dangerous pathogens.
BA 008 not only works in the air, but also on sur-
faces, even those with which you wouldn’t come
into direct contact.
BA 008 promotes the restoration of your Indoor
ecosystem’s natural balance while inhibiting
bacteria and mold colonization.
Our Natural Environmental Probiotics (NEP) are
effective against pathogens and harmful germs
such as:
• MRSA • Legionella • Aspergilus • Cladospo-
rum • Stachybotrys • Listeria • Penicillium • And
many more….
A healthier environment means a
healthier you…and your family.
Effect of Environmental Probiotics in an infected area
Environmental Probiotics
Getting Started with Better Air
1) Remove cartridge chamber cover by an out-
ward/upward motion with minimum pressure.
2) Shake Cartridge well (1) and then remove
sealing foil from Cartridge (2).
(1)
(2)
3) Insert Cartridge all the way into the cham-
ber in the direction of the arrows printed on the
cartridge.
4) Return chamber cover in a Downward/In-
ward motion with minimum pressure until locks
into place.
Note: Once Cartridge is inserted into
the BA-008, please make sure not to tilt
the unit in order to avoid spillage of the
Environmental Probiotic uid.
IMPORTANT: Always turn power off when
removing and replacing cartridge. Also,
power must be turned off before moving
the BA-008
Rechargeable Battery / DC recharging
6) Connect the power cord to the inlet below
the Programing buttons (1), Plug the power
block into an AC outlet , allow for at least a 10
hour preliminary charge , once charge is com-
pleted, choose the most appropriate location
for your BA-008 , between charges (2)
Warning: The BA-008 should be used only
with the power pack provided by the manu-
facturer.
Power Connection
DC Model
5) Connect the power cord to the inlet below
the Programing buttons (1), in the appropriate,
country-specic plug to the power block. Plug
the power block into an AC outlet within reach
of the location you have chosen for your BA-
008 (2)
(1)
(2)
Quick start Guide - BA-008
Programing
Note: when programming, please remember not to
tilt unit in order to avoid unnecessary spillage
7) On / Off button - Press lightly for 2 seconds i
n
order to operate the BA008, repeat this action in
order to shut down
8) Manual Pulse button - Press pulse button in or-
der to release an extra dose of Environmental pro-
biotic spray manually. Pulse size will be determined
according to the operating level program (High,
Medium, Low). Using the Manual Pulse button will
not interfere with the chosen operating scheme.
9) Operating level selection buttons
Note: When operating the device for the rst time,
you should adjust to “High” for the rst Three days
and follow these simple procedures on an ongoing
basis:
• “Low” – Indoor area up to 15 sqm
• “Medium” – Indoor area up to 50 sqm
• “High” – Indoor area up to 75 sqm
If the BA 008 is installed in close proximity to an
HVAC air intake, this will expand the treated area
(depending on type and size of HVAC system)
10) Sleep Mode - Pressing th
e
Sleep Mode button will sus-
pend operation of
the BA 008
for a period
of 10 hours
1