LUX LED LIGHTING Brooklyn AURA User guide

Brand: LUX LED LIGHTING

Model: Brooklyn AURA

Type: User guide

LUX LED LIGHTING Brooklyn AURA is an innovative task light with a host of features to enhance your work or study space. The lamp offers three brightness levels (600, 250, 20 lumens) to suit your needs, and its Qi-enabled wireless charging pad can power up compatible devices without the need for cables. The Brooklyn AURA also includes 2 USB ports for charging additional devices, and its sturdy aluminum frame and stabilizing pad ensure stability on any surface.

Brooklyn AURA

LED Task Light User Guide

ASSEMBLY INSTRUCTIONS

lamp to reveal the stabalizing pad.

• Clean the intended installation surface to remove dust or

particulates. If bottom of lamp loses its stickiness, it can be

cleaned with a wet cloth.

• A tripod screw mount is also included, for a more

permanent installation.

• Install the included power cord to rear of lamp and then

plug into any wall outlet.

USING YOUR LUX BROOKLYN AURA LED LAMP:

•Turn the light on by touching the power button on the front

of the lamp.

• Press the power button again to cycle through the three

brightness levels (600, 250, 20 lumens).

• The wireless Qi Charging pad will only work with

Qi-enabled devices. For a full list of compatible devices,

visit: https://www.wirelesspowerconsortium.com.

• NOTE: The wireless charger will generally charge any

compatible mobile device provided the case is no thicker

than 3mm. However, if the back panel is thicker, or if the

case contains a battery, cards, or other metal, it may

prevent the device from wirelessly charging.

• When using the lamp to charge your devices, unplug or

remove the devices once batteries are full.

SAFETY INFORMATION:

replaced; if the cable is damaged the entire power supply

must be replaced.

• For indoor use only; do not use outdoors or in damp

locations.

• Switch the lamp off before disconnecting the power.

• Do not look directly at the LEDs when they are illuminated.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation of the device.

Any changes or modifications to this unit not expressly approved

by the party responsible for compliance could void the user’s

authority to operate the equipment.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by

turning the quipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

Visit us at:

www.luxledlights.com

REVISION 100

CUSTOMER SERVICE:

For questions and assistance please contact us at:

805-329-5646 • [email protected]

LUX LED LIGHTING Brooklyn AURA User guide

Brand: LUX LED LIGHTING

Model: Brooklyn AURA

Type: User guide

Download PDF

report

LUX LED LIGHTING Brooklyn AURA User guide

LUX LED LIGHTING Brooklyn AURA User guide

Other documents