2048Wh | 2400W
PowerRoam Portable Power Station
User Manual | Manual de usuario
Product Overview
Product Details
DC
IOT
LCD Display
ON/OFF Power Button/ON/OFF Power Indicator
DC Power Button/DC Output Indicator
IoT Button/ IoT Indicator
Flashlight Power Button
AC Power Button/AC Output Indicator
LCD Display
AC Output Outlets × 6
Anderson Output Port
USB-A Output Ports × 2
①
②
③
④
⑤
⑥
⑦
⑧
USB-C Output Ports × 4
DC5521 Output Ports × 2
Car Charging Output Port
Flashlight
Ventilation Outlet
AC Input Outlet (Utility Power)
Expansion Battery Port
DC Input Port (Solar/Car Charging)
Protective Earth Screw
Overcharge Protection Switch
⑪
⑫
⑬
⑭
⑮
⑯
⑰
⑱
⑩
Wi-Fi Connection Status
Bluetooth Connection Status
Ventilation Fan Status
High-/Low-Temperature Warning
Always-On Mode
Power-Saving Mode
Power Reduction Mode
Overload
Warning
Remaining
Recharge Time Total Input
Power Remaining
Battery Level Remaining
Discharge Time Total Output Power /
Error Code
USB-C
Output USB-A
Output DC
Output AC
Output
Expansion Battery
General Info
Input
Output
Dimensions
Weight
Lithium Battery
Rated Energy
AC
Solar Charging (×2)
DC/Car Charger
AC (×6)
USB-A (×2)
USB-C1
USB-C2
USB-C3/C4
Car Charger (×1)
120V~ 60Hz 20A 2400W Max
Single-Port: 5V 3A/9V 2A/12V 1.5A/5V 4.5A 22.5W Max
(Dual-Port: 5V 3A 15W Max)
5V 3A/9V 3A/12V 3A/15V 3A/20V 5A/28V 5A 140W Max
5V 3A/9V 3A/12V 3A/15V 3A/20V 5A 100W Max
5V 3A/9V 3A/12V 3A/15V 3A/20V 2.25A 45W Max
12V 10A 120W Max
Anderson Output (×1) 12V 25A 300W Max
Total Output Power 2500W Max
54×25×29 (cm) / 21.3×9.8×11.4 (in)
About 25.5 kg /56.2 lbs.
2048Wh 40Ah 51.2V
100-130V~ 60Hz 15A Max
12-60V 15A (Single-Port: 600W Max, Dual-Port: 1200W Max)
12V/24V 8A Max
DC5521 (×2) Single-Port: 12V 5A 60W Max, Dual-Port: 12V 10A 120W Max
(Anderson + Car Charger + DC5521 × 2 = 300W Max)
Environmental Operating Temperature
Discharging Temperature 14℉~104℉ (-10℃~40℃)
Recharging Temperature 32℉~104℉ (0℃~40℃)
Specifications
Recharging Your Power Station
· Before charging, please make sure the power station is properly grounded.
· Please use an original or safety-certified power cable that meets the charging specifications of this power station.
· When charging, ensure the power station is well-ventilated and free from combustibles.
Safety Precautions
· Please charge power station before initial use to activate.
· In order to ensure safety while charging, overcurrent protection will automatically trigger when the
input current exceeds the overcurrent protection value. When this happens, the Overcharge Protection
Switch will protrude. Once the overcurrent is abolished, press the switch to resume charging.
· If the power station shows a low battery, please recharge promptly. Refraining from prompt recharge
may result in the battery becoming inoperable.
Recharge with PowerZip Fast Charging 1800W Max. Input Power
Important Note
AC Recharging
AC Power Cable
Maximum Power Recharging
Before connecting a solar panel, ensure its total output voltage is within the range required by the power
station (12V-60V), or it will not charge.
Solar Panel Recharging
This power station comes equipped with dual DC input ports. To charge at the fastest speed, connect three
200W solar panels in series to each port simultaneously for up to 600W via a single port (as shown in the
picture) and 1200W using dual ports.
Tips
· Ensure that you use the included serial adapter and that the specifications for the connected solar panels
are the same.
· Additional solar panel connection cables are sold separately.
Solar Panel
Serial Adapter
Flashlight
In the standby state, you can switch between 5 states:
Low Light
High Light
Strobe
SOS
Off (or press and hold for 3 seconds)
SOS
To charge the power station via vehicle cigarette lighter port:
· Please start the vehicle before recharging the power station with car charging cable. This will prevent
vehicle failure to start due to insufficient battery.
· Please ensure cigarette lighter port and the car charging cable are properly connected.
Car Recharging
Car Charging Cable
Power On/Power Off
Powering Your Devices
Tip：
While powered on, if the power station is not used within 1 minute, the display automatically turns off. Press
any button to turn display on.
Press to turn on
Press and hold for 3 s
econds to turn off.
3S
×1
AC Output
In the standby state,
press to turn on.
Press again to turn off.
Microwave
Oven
Hammer
Drill
×1
Tips:
· To switch AC output frequency, press and hold the AC Power Button for 10 seconds while the AC output is off.
· Please check the rated frequency of the device before use. Improper frequency settings will result in
damage to the power station and connected device(s).
Anderson Output
In the standby state,
press to turn on.
Press again to turn off
×1
RV
Car Charging Output / DC5521 Output
Car Refrigerator
In the standby state,
press to turn on.
Press again to turn off.
×1
USB Output
Laptop Mobile
Phone Digital
Camera
The default state is
ON, double-press
“DC” button to turn off.
×2
USB Fast Charging Cable
Features & Operating Modes
While the U-Turbo Mode is active, the AC multi-port output of the power station can support devices with
power ratings of up to 3500W.
Tips:
· For a safer charge, the U-Turbo mode is temporarily disabled while the power station is simultaneously
charging and charging other devices.
· U-Turbo is enabled by default. You can disable it using the "UGREEN" App.
· The AC multi-port output can support heating devices up to 3500W like hair dryers, electric kettles, etc.,
but U-Turbo Mode is not applicable for all electrical appliances. Inductive devices and some precision
instruments are not recommended.
Power Reduction Mode
In this mode, the recharging/discharging power of the power station is reduced. This is to improve the
overall lifespan of the power station.
For safe use, Power Reduction Mode will automatically turn on in the following 4 states:
1. Low temperature
2. High temperature
3. Low battery charging
4. Trickle charging
(The Power Reduction Mode icon on the LCD display illuminates to indicate that the mode is on.)
U-Turbo
App Download Guide
To control the power station via mobile device, scan the QR code to download the “UGREEN” App:
Tips:
· You can also search for "UGREEN" in App Store or the Google Play Store
· Open the "UGREEN" App, and go to "Help" to download the "App User Guide".
0% Battery Emergency Mode
This mode allows for flashlight and USB ports usage when battery level is at 0%.
When powered on, press and hold the DC Power Button and Flashlight Power Button for 10 seconds at the
same time to enable this mode. After use, press and hold the ON/OFF Power Button for 3 seconds to disable.
Tips：
· This mode is only available when the battery level is 0%.
· Please avoid using this mode frequently, as power station battery life could be negatively affected.
· After using this mode, promptly charge the power station, otherwise it may become unusable.
Operating Mode
Mode Description Setting
Standard
Mode
Power-Saving
Mode
Always-On
Mode
In Standard Mode, the power station automatically
shuts down if there is no device connected and no
operation is performed within 5 hours after
powering on.
In Power-Saving Mode, the power station
automatically shuts down if there is no device
connected and no operation is performed within 2
hours after powering on.
In Always-On Mode, the power station remains on
until the battery is depleted or the power station is
manually turned off.
Default mode
While power station is on,
double-press the ON/OFF
Power Button to
enable/disable this mode.
While power station is on,
press and hold the AC power
button for 3 seconds to
enable/disable this mode.
Factory Reset
To perform a factory reset, ensure the power station is not connected to any other device/appliances/etc.
Press and hold the AC Power Button and the DC Power Button simultaneously for 10 seconds to restore
the power station to factory settings.
Note:
This operation will clear all function settings saved by the power station. Perform reset with caution.
Expansion Battery
This power station is capable of connecting to an expansion battery. For more information, please refer to the
Ugreen EB2000 Expansion Battery (2048Wh) User Manual.
FAQs
Q1. What devices can be connected to the AC Output Port of the power station?
A1: The rated power of the AC output port of this power station is 2400W, which can power most
electronics, but it is recommended that you confirm the power of the device before use and ensure
that the sum of the power of all load devices is less than the rated power. When turning on the
U-Turbo Mode, AC output port of the power station can support heating devices with a rated power of
up to 3500W. But the function is not suitable for all devices. Inductive devices and some precision
instruments are not recommended.
Q2: Can I recharge the power station while charging connected devices?
A2: Yes. It is not recommended to power high-power devices when using this feature.
Q3: How can I check the remaining discharge time?
A3: After a device is connected, the estimated remaining discharge time for the power station will be
shown on the display. This is calculated based on the actual power of the connected device and the
remaining battery level of the power station. If the actual power of the connected device is high and
the power station's remaining power is low, the remaining discharge time will be short.
Q4: Why does the fan turn on during use?
A4: The fan automatically turns on to cool the power station, which is normal and provides a safer charge.
You can reduce the sound caused by the fans by turning on [Quiet Mode] in the "UGREEN" App [Settings].
Q5: Why does the power station run out of battery even when no device is connected?
A5: When the AC Output Outlets are on, even if no device is connected, there will be a certain amount of
no-load power consumption. To avoid this, please ensure the AC Output Outlets are turned off when not
in use to conserve battery.
Troubleshooting
Note: In the case unresolvable issues occur, please contact UGREEN Customer Service.
OVERLOAD
F05
F22
F33
F36
F37
F38
F39
+F03
+F10/F12/
F49
Indicator Problem Solution
Remove all connected external devices from the
power station then restart the power station.
Please cease use immediately and contact
UGREEN Customer Service.
Battery is low, please charge promptly
Please cease use immediately and contact
UGREEN Customer Service.
Please check whether input voltage is within the
appropriate voltage range required by this manual.
If the input voltage is normal, please contact
UGREEN Customer Service.
Move the power station to a working
environment temperature as previously specified
by this manual before continued use.
Method 1: Open the App to enable Quiet mode.
Method 2: Stop charging the power station, turn it
off, and wait 10 minutes before resuming charge.
Remove all connected external devices from the
power station, place the power station in a cool
and well-ventilated environment, then wait 10
minutes. After 10 minutes, turn it on again.
Discharging High-
Temperature Protection
Discharging Undervoltage
Protection
Output Overload
Low-Temperature Protection
Charging High-Temperature
Protection
Temperature Detection
Failure
DC Output Failure
USB-A1 Output Failure
USB-A2 Output Failure
AC Charging Input Overvoltage
AC Charging Input Undervoltage
DC Charging Input Overvoltage
+F17
/
+F50
/
What's In The Box
USER MANUAL
1 × 2400W PowerRoam Power Station 1 × AC Power Cable
1 × Dust Mesh Filter
Installation Guide
2 × Solar Panel Serial Adapter
1 × User Manual
1 × DC5521 to DC5525 Cable
1 × Car Charging Cable 1 × Accessory Storage Bag
1 × Detachable Trolley 1 × Dust Mesh Filter
1 × Detachable
Trolley User Guide
1 × Dust Cover
1 × Warranty Card
Safety Instructions
Warnings
· This power station contains a lithium battery; please do not disassemble, violently impact, or squeeze
the power station.
· Do not throw the power station into fire, or use it in situations of high temperature and during short
circuit.
· Do not insert foreign objects or fingers into the power station or use sharp objects to puncture it, so as
to avoid damaging the power station or unintentionally causing an explosion due to abnormal use or
short circuit.
· If the power station accidentally falls into water, it should be immediately moved into a safe, open area
until it is completely dry. Do not use it again. Dispose of it properly according to the Disposal Guide
detailed in this manual.
· Due to the particularity of the power station (built-in battery, high-voltage, etc.), please keep the power
station out of reach of children and pets. Special groups are recommended to use it under the
protection and supervision of a designated guardian.
Transportation & Storage
· Do not store or transport this power station with metal objects (glasses, watches, metal necklaces,
hairpins, etc.).
· If you want to ship this power station via logistical means, please discharge the power station battery to
10%~30%.
Notes for Safe Use
· Do not place heavy objects on this power station.
· Please use the power station in a dry and well-ventilated environment. While in use, ensure the
ventilation outlets of the power station are not blocked.
· Do not place the power station near sources of heat or fire, such as microwave ovens, pressure cookers,
heating furnaces, etc. If the power station catches fire, please use fire extinguishing equipment as
quickly as possible.
· Do not expose the power station to any liquids and do not use it in rainy or humid environments.
· If the power station is subjected to strong impact or fall, do not continue normal use. Please dispose of
it properly according to the Disposal Guide in this manual.
· Do not use this power station in environments of strong electrostatic or electromagnetism.
· When not in use, please remove the power cord of the power station and all connected external
devices. When unplugging the power cord, please pull it out from the plug directly, rather than pulling
on the cord.
· Do not use non-UGREEN cords or parts. If repair or replacement parts and/or accessories are required,
please contact UGREEN customer service.
· Do not use a damaged power cable to charge the power station.
· Please use the power station at the specified working environment temperature.
· Please store this power station in a dry place, at room temperature.
· This power station cannot be carried on a plane. Please abide by the relevant regulations of civil
aviation transportation.
Maintenance
· For long-term storage, please use the provided dust cover to cover the power station. Please charge and
discharge at least once every 3 months (discharge to 0%, charge to 100%, then finally discharge to
30%-60%) to ensure battery health.
· For long-term storage, please check the power station’s remaining battery level. If it shows a low battery,
please charge first, otherwise the battery may be damaged.
· Please store the power station at the appropriate storage environment temperature (20℃~25℃/68°F-77°F)
specified in this manual.
· If the port of the power station is dirty, please clean with a dry cloth. Do not clean with chemicals or spray
cleaners.
Disposal
· Please dispose of this power station in accordance with local laws and regulations regarding battery
recycling and disposal. Do not dispose of it in ordinary trash.
· Be sure to fully discharge the battery of this power station before disposing of it in the designated battery
recycling bin.
· If the battery cannot be completely discharged due to product failure, please contact a professional
battery recycling company for further processing.
Warranty Information
A limited 5-year warranty applies to all UGREEN portable power stations purchased from UGREEN or
authorized sellers. Please feel free to contact us if you run into any problems. For more details on the
product warranty, please visit: www.ugreen.com.
Disclaimer
· Before use, please read this manual carefully, and use the power station correctly in accordance with all
safety instructions in this manual. Relevant safety precautions especially must be followed. After reading,
please keep the manual for future reference.
· This power station is not intended for use with devices that require extreme reliability and/or security,
including but not limited to: medical/life support devices such as medical ventilators, precision
instruments (e.g. theodolite, barometers), and specialized devices such as data servers. Please do not
use this power station under any high-risk or life-threatening scenario. UGREEN expressly disclaims any
express or implied warranties of suitability for high-risk activities. Any such use is a misuse of the power
station.
· To the extent permitted by law, improper use of this power station may directly or indirectly result in
damages to the power station and/or personal property and cause personal injury. UGREEN will not
assume any legal responsibility. Under the condition of compliance with laws and regulations, UGREEN
has the final right to interpret this manual and other related documents of this power station. The User
Manual is subject to update, revision, or termination without notice, but updates can be received via the
"UGREEN" App or https://www.ugreen.com/.
All data shown are based on UGREEN laboratory testing.
Actual results may var y according to specific circumstances.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Bluetti AC200MAX User manual
-
-
-
ZENDURE V6400 SuperBase Energy Storage System User manual
-
Bluetti B230 User manual
-
EcoFlow DELTA Pro User manual
-
Anker 767 User manual
-
Anker SOLIX 767 User manual
-
-
