2. Oneida Air Systems
  3. VSRSKT000

Oneida Air Systems VSRSKT000 Installation guide

  • Hello! I've reviewed the user guide for the Oneida Air Systems Taurus Retrofit VSRSKT000. This document provides instructions on how to install the retrofit , which is designed to improve dust collection and reduce maintenance. I’m ready to answer your questions about the features and installation process described in the guide.
  • What does the retrofit improve?
    What handle is used in the retrofit?
    Does the retrofit require a cloth dust bag?
Retrot
Handle
Kunzle & Tasin Taurus Retrot
VSRSKT000
Improved collection at the oor.
Retrot incorporates existing Taurus handle and controls.
Machine stays cleaner, less maintenance.
Reduced dust jam-ups at the drum. Sanding belts last longer.
Entire cyclone ts within width of machine.
Clean operation. No airborne dust.
Eliminates cloth dust bag.
Appearance and color of Vortex subject to change.
1. Lower drum and separate control arm from sander.
Fig. 1.
2. Loosen and remove Taurus handle from sander. Remove
upper handle from steel tube by loosening Allen head screw.
Fig. 2 & 4.
3. Place OAS handle into Taurus making sure that the handle
bottoms out on the sander. Tighten down Fig. 3.
4. Sander cyclone can now be attached to Taurus.
Before After
/