2. Centerforce
  3. 700469

Centerforce 700469, 700478, 700479 Installation guide

  • I have reviewed the instructions for CENTERFORCE flywheels. This document highlights the importance of removing the preservative coating before installation to prevent issues. I am ready to answer your questions about this document and the flywheels it describes.
  • What should be done before installing a CENTERFORCE flywheel?
    What may happen if the preservative is not removed?
    What may occur when replacing Dual-Mass flywheel with Single-Mass Flywheel?
CENTERFORCE FLYWHEELS
ALL FLYWHEELS
All CENTERFORCE fl ywheels have a preservative
on them to help prevent rust. We recommend
that you use BRAKE CLEAN to remove all traces
of the preservative prior to installing the clutch
assembly.
Failure to do so may cause slipage and
premature clutch failure
NOTE: Replacement of any Dual-Mass fl ywheel
with a Single-Mass Flywheel may result in
unwanted gear noise from the transmission.
IMPORTANT
03/21/11 12:36
I94MI003 CENTERFORCE TECH. LINE (928) 771-8422 WWW.CENTERFORCE.COM
IMPORTANT
"NOTE" Centerforce tip sheets are for general reference only.
Please refer to your owners manual for vehicle specifi cations.
/