2. 3com
  3. SSII ADVANCED RPS POWER MODULE TYPE 3

3com SSII ADVANCED RPS POWER MODULE TYPE 3, 100W TYPE IIA ARPS MODULE, SUPERSTACK 3 ADVANCED RPS CHASSIS, SuperStack 3C16071B, SuperStack 3C16074, SuperStack 3C16074A Important information

  • Hello! I am an AI chatbot trained to assist you with the 3com SSII ADVANCED RPS POWER MODULE TYPE 3 Important information. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
I
MPORTANT
I
NFORMATION
ABOUT
S
UPER
S
TACK
3
AND
THE
A
DVANCED
RPS C
HASSIS
The Advanced RPS chassis (3C16071B) does not support the Type 2
Power Module (3C16074). You must use a Type 2A Power Module
(3C16074A).
Some SuperStack products have been renamed SuperStack 3 and
have a new "look and feel", including the ARPS chassis. It is
important to note that the SuperStack 3 ARPS chassis is compatible
with all existing SuperStack II power modules (except the Type 2
Power Module 3C16074), Y cables and straight DC cables and will
operate and provide product support exactly as described in the user
documentation that accompanies these items.
On the ARPS Management Module (3C16080), the software has
been updated to reflect the "SuperStack 3" name. The features and
functionality of the software remain exactly the same and the
module can be used in both SuperStack II and SuperStack 3 ARPS
chassis.
Copyright © 2000, 3Com Technologies. All rights reserved.
Unless otherwise indicated, 3Com registered trademarks are registered in the United States
and may or may not be registered in other countries.
3Com and SuperStack are registered trademarks of 3Com Corporation.
The 3Com logo is a trademark of 3Com Corporation.
Other brand and product names may be registered trademarks or trademarks of their
respective holders.
DNA1607-0BAA01
Published September 2000
I
MPORTANT
I
NFORMATION
ABOUT
S
UPER
S
TACK
3
AND
THE
A
DVANCED
RPS C
HASSIS
The Advanced RPS chassis (3C16071B) does not support the Type 2
Power Module (3C16074). You must use a Type 2A Power Module
(3C16074A).
Some SuperStack products have been renamed SuperStack 3 and
have a new "look and feel", including the ARPS chassis. It is
important to note that the SuperStack 3 ARPS chassis is compatible
with all existing SuperStack II power modules (except the Type 2
Power Module 3C16074), Y cables and straight DC cables and will
operate and provide product support exactly as described in the user
documentation that accompanies these items.
On the ARPS Management Module (3C16080), the software has
been updated to reflect the "SuperStack 3" name. The features and
functionality of the software remain exactly the same and the
module can be used in both SuperStack II and SuperStack 3 ARPS
chassis.
Copyright © 2000, 3Com Technologies. All rights reserved.
Unless otherwise indicated, 3Com registered trademarks are registered in the United States
and may or may not be registered in other countries.
3Com and SuperStack are registered trademarks of 3Com Corporation.
The 3Com logo is a trademark of 3Com Corporation.
Other brand and product names may be registered trademarks or trademarks of their
respective holders.
DNA1607-0BAA01
Published September 2000
/