Flexit CS2500 User manual

CS2500
Brand
Flexit
Model
CS2500
Type
User manual

Flexit CS2500 is a versatile and user-friendly controller designed to enhance your indoor climate experience. With its advanced features, it allows you to effortlessly manage and optimize the performance of your heating and cooling systems. The intuitive interface provides quick access to various settings, enabling you to tailor the climate to your specific preferences. Whether you seek energy efficiency, comfort, or a combination of both, the Flexit CS2500 empowers you to create a comfortable and energy-conscious indoor environment.

Flexit CS2500 is a versatile and user-friendly controller designed to enhance your indoor climate experience. With its advanced features, it allows you to effortlessly manage and optimize the performance of your heating and cooling systems. The intuitive interface provides quick access to various settings, enabling you to tailor the climate to your specific preferences. Whether you seek energy efficiency, comfort, or a combination of both, the Flexit CS2500 empowers you to create a comfortable and energy-conscious indoor environment.

ART.NR. 118044
120912-01
2023-06
MONTERINGSVEILEDNING
Oppdatere BSP-versjon CS2500
MONTERINGANVISNING
Uppdatera BSP-version CS2500
INSTALLATION INSTRUCTIONS
Update BSP version CS2500
ProNordic
2
1. Sett inn SD-kortet i kontrolleren
2. Logg inn med passord 2000
3. Last inn innstilte parametere til SD-kortet
1. Sätt in SD-kortet i regulatorn
2. Logga in med lösenord 2000
3. Ladda inställda parametrar till SD-kortet
1. Insert the SD card into the controller
2. Log in with password 2000
3. Load set parameters to the SD card
Lagre innstillinger
Oppdater BSP
Plassering av
SD-minnekort
Startside > Hovedmeny > Enter PIN
Startside > Hovedmeny >
Systeminstilling > Lagre/tilbakest >
Lagre > Eks.minne
5
3
2
1
4
4. Koble fra strømmen til enheten
5. Ta en smal gjenstand, trykk og hold knappen ned i
hullet. Sett på spenningen (mens knappen er trykket
inn) til BSP LED begynner å blinke rødt/grønt (kan ta
noen sekunder). Vent til kontrolleren har startet på
nytt og skjermen ser ut som nedenfor, start deretter
kontrolleren på nytt ved å slå av/på strømmen.
4. Gör aggregatet spänningslöst
5. Ta ett smalt föremål tryck, och håll inne, knappen
nere i hålet. Sätt på spänningen (medans knappen är
intryckt) tills BSP-dioden börjar blinka rött/grönt (kan
ta några sekunder). Vänta tills regulatorn har startat
om och skärmen ser ut som nedan, starta sedan om
regulatorn genom att ta av/på spänningen.
4. Switch o the power to the unit
5. Take a narrow object, press and hold the button
down into the hole. Apply the voltage (while the
button is pressed) until the BSP LED starts ashing
red/green (may take a few seconds). Wait until the
controller has restarted and the screen looks like the
pictures, then restart the controller by turning o/on
the power. 5
5
Startsida > Huvudmeny >
Systeminställn. > Spara/Återställ >
Ladda param. > Ext.m
Start page > Main menu > System
objects > Save/Load > Sett.load >
Ext.m
Startsida > Huvudmeny > Ange PIN
Start page > Main menu > Enter PIN
ProTouch ProTouch
ProPanel
6. Last inn innstilte parametere fra SD-kortet.
Startside > Hovedmeny >
Systeminstilling > Lagre/tilbakest >
Les inn > Eks.minne = Utfør
Vent til:
Startside > Hovedmeny >
Systeminstilling > Lagre/tilbakest
> Klar
Deretter restart kontrolleren:
Startside > Hovedmeny >
Systeminstilling > Lagre/tilbakest >
Omstart kreves! > Utfør
OMSTART
Nå er kontrolleren oppdatert og tidligere innstillinger er
lagret.
6. Ladda inställda parametrar från SD-kortet.
Startsida > Huvudmeny >
Systeminställn. > Spara/Återställ >
Ladda param. > Ext.m = Utför
Vänta tills:
Startsida > Huvudmeny >
Systeminställn. > Spara/Återställ >
Klar
Därefter starta om regulatorn:
Startsida > Huvudmeny >
Systeminställn. > Spara/Återställ >
Omstart = Utför
OMSTART
Nu är regulatorn uppdaterad och tidigare inställningar
lagrade.
6. Load set parameters from the SD card
Start page > Main menu > System objects
> Save/Load > Sett.load > Ext. m > Execute
Wait until:
Start page > Main menu > System objects
> Save/Load > Ready
Then restart the controller:
Start page > Main menu > System objects
> Save/Load > Restart required! = Execute
RESTART
Now the controller is updated, previous settings are
stored.
Flexit AS
Tlf +47 69 81 00 00
[email protected] www.flexit.no
Our products are subject to continuous development and we therefore reserve the right to
make changes. We also disclaim liability for any printing errors that may occur.
Våre produkter er i kontinuerlig utvikling og vi forbeholder oss retten til endringer.
Vi tar forbehold om eventuelle trykkfeil som måtte oppstå.
Våra produkter utvecklas ständigt och vi förbehåller oss därför rätten till att göra ändringar.
Vi tar inte heller ansvar för eventuella feltryck som kan uppstå.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Flexit CS2500 User manual

CS2500
Brand
Flexit
Model
CS2500
Type
User manual

Flexit CS2500 is a versatile and user-friendly controller designed to enhance your indoor climate experience. With its advanced features, it allows you to effortlessly manage and optimize the performance of your heating and cooling systems. The intuitive interface provides quick access to various settings, enabling you to tailor the climate to your specific preferences. Whether you seek energy efficiency, comfort, or a combination of both, the Flexit CS2500 empowers you to create a comfortable and energy-conscious indoor environment.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents