2. AcuityBrands
  3. SmartThings
SmartThings

AcuityBrands SmartThings Operating instructions

  • Hello! I've read the Commissioning Instructions for the JunoConnect Wafer. This document provides step-by-step guidance on how to integrate your Wafer with the SmartThings app using Bluetooth or with a SmartThings hub. I can answer your questions about device setup, app integration, and the features mentioned in the instructions.
  • How do I add my Wafer to the SmartThings app without a hub?
    What is the step after adding a new device?
    How do I connect the Wafer using a SmartThings Hub?
    What do I do after my Wafer is discovered?
Commissioning Instructions JunoConnect WaferTM
Detailed Instructions for SmartThings without a hub
1. Download the SmartThings app to your phone or tablet from the IOS app store or Google play store.
2. Create an account with SmartThings to get started.
4. From the main window select
the “+” at the top right corner
to add a new device.
3. Once your account is created
re-start the app.
5. Select “Device” to add a new
device.
6. Set search by brand and
search for “Juno Connect”
Commissioning Instructions JunoConnect WaferTM
7. Select lighting from the list of
available devices under Juno
Connect.
9. SmartThings will automatically
get the drivers from the cloud.
(make sure you are connected
to the internet).
8. Select Wafer as the device to
onboard.
10. Once the app is ready press
“Start”.
11. To connect your Wafer using
a phone (Bluetooth) select
“Connect device to phone”
option.
12. Select your home and room
to place the Wafer. Then press
“Next”.
Commissioning Instructions JunoConnect WaferTM
13. After scanning your Wafer will
be discovered by the app.
Press the “Juno Connect
Wafer” to continue.
14. On iOS devices a Bluetooth
pair request will appear.
Press “Pair”.
15. SmartThings will establish
communication with the Wafer.
Make sure you are in the same
room as the Wafer.
16. Once the Wafer is
commissioned SmartThings
registers your product to the
cloud. (Make sure you have an
internet connection).
17. Once onboarded you may
rename the Wafer.
18. Once re-named, the Wafer tile
will appear in your home. The
process is now complete.
Commissioning Instructions JunoConnect WaferTM
Detailed Instructions for SmartThings with a hub
1. Follow steps 1-10 from “Samsung SmartThings without a Hub” app to your phone or tablet from the IOS
app store or Google Play store.”
3. Select your home and room
to place the Wafer. Then press
“Next”.
2. To connect your Wafer using
the SmartThings Hub, select
“Connect to (SmartThings)”
option.
4. After scanning your Wafer will
be discovered by the app.
Press the “Juno Connect
Wafer” to continue.
5. Once the Wafer is onboarded
SmartThings registers your
product to the cloud. (Make
sure you have an internet
connection).
One Lithonia Way, Conyers, GA 30012 | Phone: 770-922-9000 | www.acuitybrands.com
© 2021 Acuity Brands, Inc. All rights reserved. | JUN 878950.02_0821
Commissioning Instructions JunoConnect WaferTM
6. Once onboarded you may
rename the Wafer.
7. Once re-named the Wafer
tile will appear in your home.
The process is now complete.
will appear in your home. The
process is now complete.
/