Magnolia M10028BN Installation guide

CRYSTAL BLOCK (3)

TUBE (4)

SOCKET (5)

LOOP (1)

NIPPLE (2)

SMALL RING (6)

CRYSTAL DROP (7)

INSTALLATION INSTRUCTIONS

1.Carefully remove the fixture out of the carton, and check that all parts are included referring to the

above illustration. Make sure not to misplace any parts that are needed for the installation;

2.Install the tube (4) and crystal block (3) onto socket (5).

3.Install the crystal drop (7) onto small ring (6).

4.Install the loop (1) onto nipple (2),then secure them with loop (1).

5.Fixture is ready for lamping and installation.

ITEM NO:M10028BN

Download PDF