2. Magnolia
  3. M10028BN

Magnolia M10028BN Installation guide

  • Hello! I have reviewed the installation instructions for the light fixture model M10028BN. This document outlines the necessary steps to assemble the fixture, starting with verifying parts and then connecting components such as the tube, crystal block, and crystal drop. I am ready to assist you with any questions you may have about the installation process.
  • What is the first step of installation?
    What should be installed onto the socket?
    What component should be installed onto small ring?
CRYSTAL BLOCK (3)
TUBE (4)
SOCKET (5)
LOOP (1)
NIPPLE (2)
SMALL RING (6)
CRYSTAL DROP (7)
INSTALLATION INSTRUCTIONS
1.Carefully remove the fixture out of the carton, and check that all parts are included referring to the
above illustration. Make sure not to misplace any parts that are needed for the installation;
2.Install the tube (4) and crystal block (3) onto socket (5).
3.Install the crystal drop (7) onto small ring (6).
4.Install the loop (1) onto nipple (2),then secure them with loop (1).
5.Fixture is ready for lamping and installation.
ITEM NO:M10028BN
/