KUZCO LP20448 Installation guide

  • I've reviewed the installation sheet for the KUZCO LP20448 LED Linear Pendant. This document outlines the steps for proper installation including mounting, wiring and safety precautions. I am ready to assist you with any questions you might have about your new pendant light.
  • What type of dimmer is required for dimming?
    What is the first step in installing?
    What should be done before installation?
INSTALLATION SHEET
LP20448
LED Linear Pendant
START FROM HERE
Make sure power is completely off at the fuse box.
Have your fixture installed by a qualified licensed electrician
Prepare everything in a clear area.
Wear gloves at all times during this installation.
Read instructions carefully before you start assembly.
Keep this instruction sheet for future reference.
Technical Support: 1-855-855-8926
19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W
20181121
: kuzcolighting.com
Please Note:
• For dimming, a TRIAC type of dimmer is required.
CAUTION: HEAVY FIXTURE, THE JUNCTION BOX NEEDS TO BE REINFORCED
BEFORE INSTALLATION.
1.
2.
Remove the fixture from its original packaging. Next,
remove the mounting plate (1d) from within the canopy
(2a) by un-threading the two screws (2b). Attach the
mounting plate (1d) to the junction box (1a) and secure
to the ceiling with screws (1g). Make sure to reinforce
the wood behind or install plastic anchors (1b) to the
ceiling. Now install the two screws (1f) provided to
secure the mounting plate to the junction box (1a).
You are now ready to mount the canopy. First connect
all wires correctly black to black “L”, white to white “N”
and the ground wire with provided marrettes (1c) from
the hardware package. Attach the canopy (2a) to the
mounting plate (1d) and secure with screws (2b).
You have now completed the installation of your fixture,
enjoy.
3.
1a.
1c.
1b.
1d.
1f.
1g.
2b.
2a.
/