1000-5

Pioneer 1000-5 User manual

  • I've reviewed the installation instructions for the Kappers Fabricating Pioneer 1000-5 Rear Bumper. This document provides a detailed guide on how to mount the bumper, including the necessary hardware and bracket assembly steps. I'm ready to answer your questions about the installation process.
  • What is included in the kit?
    What tools are needed for the installation?
    Where can I find the list of the components?


 


  
 
 

 
 
 
  
  
  
  
 
  
  
  
  
  
  
  
1
2
4
5
6.1
6.2
6.3
7.1
7.2
7.3

7.4
7.5
7.7
7.6
 
Note:


 
Figure 1
 
Figure 2.

 
A
 
C
B
D

EF

G

H

          
Figure 3.
 
Figure 4.
 
Figure 5.



7.3
7.5
7.4
5
7.7

5
7.2

          

Figure 6 Note: M6 bolt will have an 8.8 marked on
the head.
 
Figure 6
          

7.1
6.1
6.3
7.6
2
4
6.2
1



 
         Figure 7 ONLY
DRILL THROUGH ONE SIDE OF THE TUBING.
         Figure 8  
Hand Tighten

         
     
          
  
Figure 9
          

Figure 9
 
Note: The zip tie locations (Figure 9) can be used to secure the wires
for cube lights.


5
1/4”
/