800-422-2952 www.babylock.com
The Free Motion Foot can be used for stippling,
meandering and thread painting.
Stippling:
Stippling is done with the needle in the center straight
stitch position and the feed dogs lowered. To start, bring
up the bobbin thread to the top of the fabric, sew a
few stitches, and trim your thread. Run your Baby Lock
machine at the fastest speed and move your fabric in a
slow, uid motion. Stippling simply means you do not
cross over any of the stitches.
Meandering:
Meandering is done following the directions above,
except the stitches are crossed.
Thread Painting:
Thread Painting is a fun technique and was an early form
of computerized machine embroidery. To start, drop the
feed dogs and ll in the design you are creating with
either a straight or a zigzag stitch.
Free Motion
Transparent Foot
(ESG-TP)
Instructions
Baby Lock
Sewing Accessories
LNIS-ESGTP
Threads and needles to use:
A variety of threads may be used, such as The Finishing
Touch™, Sulky™, variegated and metallics. The thread
you choose will determine the needle you need. When
using metallic or heavier threads, be sure, to use a
Metallica needle. This needle has a larger, longer eye
than the typical needle which prevents the thread from
fraying and shredding.
Esante (ESE, ESE2) Set Up Instructions:
Setting up your Baby Lock Esante correctly for free
motion work is essential for good results. Lower the
feed dog and lengthen your stitch to the longest
setting. Weaken your tension to the weakest setting
and increase your speed to the fastest speed. Because
the Esante’s (ESE, ESE2) tension rollers are pre-set for
each stitch, this adjustment is needed to deliver an
appropriate amount of thread for the selected stitch.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Husqvarna Viking H Class 100Q User manual
-
Pfaff passport 3.0 User manual
-
Pfaff ambition essential User manual
-
Pfaff quilt ambition 2.0 User manual
-
Pfaff ambition 610 User manual
-
SINGER 2250 Owner's manual
-
Pfaff ambition 1.5 Owner's manual
-
-
-
Unbranded M1500S Owner's manual