Jabra Pro 9460 Duo
How do I manually set up conference call mode on my Jabra
Pro headset?
To manually set up conference call mode on your Jabra headset, follow
these steps.
1. Remove the headset from the base, and make a call.
This headset becomes the primary headset, and it controls the
conference.
2. During the call, dock a secondary headset in the base of the primary
headset.
3. Select Sec. on the touch screen to connect the secondary headset.
4. When you hear a signal tone in the primary headset, press the Multi-
function button on the primary headset to start the conference call.
5. Repeat the procedure for additional headsets that join the conference.
Up to four headsets per base can join.
Secondary headsets can leave the conference by pressing the Multi-
function button.
19/10/2022 10:07
https://www.jabra.com.au/supportpages/jabra-pro-9460/9460-29-707-103/faq/f0fa9e7a-
75ad-45c5-87f8-d8b11374bbeb
Page 1 of 2
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Jabra Engage 75 Stereo Operating instructions
-
Jabra PRO 9470 AU/NZ User manual
-
Lennox Hearth 9470 User manual
-
Jabra Pro 9450 Mono Flex User manual
-
Jabra Bluetooth Headset 9460 User manual
-
Jabra 01-0125 Datasheet
-
Jabra Supreme UC MS Headset User manual
-
Comm Partners connect Polycom 330 User manual
-
Jabra 20001-495 Datasheet
-
