Acura 2023 MDX boasts an advanced automatic climate control system that maintains your desired cabin temperature. With its intuitive controls, you can effortlessly adjust the temperature, fan speed, and airflow direction to suit your comfort level. The system also features a recirculation mode to prevent outside odors from entering the vehicle, and a synchronization mode to ensure consistent temperature throughout the cabin. Additionally, the rear climate control system allows rear passengers to customize their temperature settings, making every journey comfortable for everyone on board.
Acura 2023 MDX boasts an advanced automatic climate control system that maintains your desired cabin temperature. With its intuitive controls, you can effortlessly adjust the temperature, fan speed, and airflow direction to suit your comfort level. The system also features a recirculation mode to prevent outside odors from entering the vehicle, and a synchronization mode to ensure consistent temperature throughout the cabin. Additionally, the rear climate control system allows rear passengers to customize their temperature settings, making every journey comfortable for everyone on board.
Quick Reference Guide
Climate Control System (P235)
●Press the AUTO button to activate the climate control system.
●Press the button to turn the system on or off.
●Press the button to defrost the windshield.
Floor and windshield defroster
vents
Floor vents
Dashboard and floor vents, and
back of the console
compartment
Dashboard vents and back of the
console compartment
AUTO Button
Passenger’s Side
Temperature
Control Switch
(ON/OFF)
Button
(Windshield
Defroster) Button
SYNC (Synchronization)
Button
Fan Control Buttons
Driver’s Side
Temperature
Control Switch
MODE Control Button
A/C (Air Conditioning) Button
(Recirculation)
Button
REAR LOCK Button
REAR SETTINGS Button
Rear Climate Control (P239)
●Press the rear AUTO button to activate
the rear climate control system.
●Press the button to turn the system
on or off.
Rear Temperature
Control Buttons
Rear Fan
Control Buttons
Rear AUTO
Button
(ON/OFF)
Button
MODE Control
Button
Rear floor vents
Back of the console compartment
and floor vents
Back of the console compartment
vents
23 ACURA MDX-31TYA6100.book 18 ページ ２０２２年２月４日 金曜日 午前１０時２５分
Controls
Climate Control System
Using Automatic Climate Control
The automatic climate control system maintains the interior temperature you select.
The system also selects the proper mix of heated or cooled air that raises or lowers
the interior temperature to your preference as quickly as possible.
Use the system when the engine is running.
1. Press the AUTO button.
2. Adjust the interior temperature using the driver’s side or passenger’s side
temperature control switch.
3. Press the (ON/OFF) button to cancel.
1Using Automatic Climate Control
If any buttons are pressed while using the climate
control system in auto, the function of the button
that was pressed will take priority.
The AUTO indicator will go off, but functions
unrelated to the button that was pressed will be
controlled automatically.
During idle-stops, air-conditioning is suspended, and
only the blower remains active.
If you do not want air-conditioning suspended, press
the Auto Idle Stop OFF button to cancel idle-stop.
To prevent cold air from blowing in from outside, the
fan may not start immediately when the AUTO
button is pressed.
If the interior is very warm, you can cool it down
more rapidly by partially opening the windows,
turning the system on auto, and setting the
temperature to low. Change the fresh air mode to
recirculation mode until the temperature cools down.
When you set the temperature to the lower or upper
limit, Lo or Hi is displayed.
Pressing the button switches the climate
control system between on and off. When turned on,
the system returns to your last selection.
Floor and
windshield
defroster
vents
Floor ventsDashboard and
floor vents, and
back of the console
compartment
Dashboard
vents and back
of the console
compartment
Driver’s Side
Temperature
Control Switch
Passenger’s
Side
Temperature
Control Switch
A/C (Air Conditioning)
Button
(ON/OFF) Button
Fan Control Buttons
(Recirculation)
Button
(Windshield
Defroster) Button
AUTO Button
SYNC (Synchronization)
Button
23 ACURA MDX-31TYA6100.book 235 ページ ２０２２年２月４日 金曜日 午前１０時２５分
uuClimate Control SystemuUsing Automatic Climate Control
Controls
■Switching between the recirculation and fresh air modes
Press the (recirculation) button and switch the mode depending on
environmental conditions.
Recirculation mode (indicator on): Recirculates air from the vehicle’s interior through
the system.
Fresh air mode (indicator off): Maintains outside ventilation.
1Using Automatic Climate Control
When you unlock the doors with your remote, the
driver’s ID (DRIVER 1 or DRIVER 2) is detected, and
the climate control settings are turned to the
respective mode automatically when you set the
power mode to ON.
23 ACURA MDX-31TYA6100.book 236 ページ ２０２２年２月４日 金曜日 午前１０時２５分
uuClimate Control SystemuUsing Automatic Climate Control
Controls
Pressing the button turns the air
conditioning system on and automatically
switches the system to fresh air mode.
Press the button again to turn off, the
system returns to the previous settings.
■To rapidly defrost the windows
1. Press the button.
2. Press the button.
■Defrosting the Windshield and Windows
1Defrosting the Windshield and Windows
For your safety, make sure you have a clear view
through all the windows before driving.
Do not set the temperature near the upper or lower
limit.
When cold air hits the windshield, the outside of the
windshield may fog up.
If you press the button during Auto Idle Stop, the
engine restarts automatically.
1To rapidly defrost the windows
After defrosting the windows, switch over to fresh air
mode.
If you keep the system in recirculation mode, the
windows may fog up from humidity. This impedes
visibility.
23 ACURA MDX-31TYA6100.book 237 ページ ２０２２年２月４日 金曜日 午前１０時２５分
uuClimate Control SystemuUsing Automatic Climate Control
Controls
You can set the temperature synchronously for the driver’s side, passenger’s side
and rear in synchronization mode.
1. Press the SYNC button.
uThe SYNC indicator will come on.
uThe system switches to synchronization mode.
2. Adjust the temperature using the driver’s side temperature control switch.
Press the SYNC button, adjust the interior temperature using the passenger’s side
temperature control switch or changing the rear temperature to return to dual
mode.
■Synchronization Mode
1Synchronization Mode
When you press the button, the system changes
to synchronization mode.
When the system is in dual mode, the driver’s side
temperature, the passenger’s side temperature, and
the rear temperature can be set separately.
Driver’s Side
Temperature
Control Switch
Passenger’s Side
Temperature
Control Switch
SYNC Button
23 ACURA MDX-31TYA6100.book 238 ページ ２０２２年２月４日 金曜日 午前１０時２５分
uuClimate Control SystemuRear Climate Control System
Controls
Rear Climate Control System
Use the system when the engine is running and the climate control system is
operating.
1. Press the (ON/OFF) button.
2. Press the REAR SETTINGS button.
uThe system switches to the rear control mode for 10 seconds. The REAR
indicator appears on the display.
3. Press the AUTO button.
uThe rear system changes to AUTO mode.
uThe system automatically adjusts the fan speed and airflow levels to maintain
the set rear temperature. Change the temperature if necessary.
4. To turn off the rear climate control system, press the (ON/OFF) button.
■Using the Rear Climate Control System From the Front Panel
1Rear Climate Control System
LOCK appears on the rear control panel while the
rear lock is on.
If the rear lock is on while in SYNC mode, the rear
control panel is disabled. LOCK SYNC appears on the
rear control panel.
1Using the Rear Climate Control System From the Front Panel
Press the REAR LOCK button to turn the rear lock
mode on and off.
While the rear lock mode is on, the rear control panel
is disabled.
uThe REAR LOCK indicator will come on.
REAR LOCK
Button
REAR SETTINGS Button
23 ACURA MDX-31TYA6100.book 239 ページ ２０２２年２月４日 金曜日 午前１０時２５分
uuClimate Control SystemuRear Climate Control System
Controls
Use the system when the engine is running
1. Press the rear AUTO button.
2. Adjust the interior temperature using the rear temperature control button.
3. To turn off the rear climate control system, press (ON/OFF) button.
■Using the Rear Climate Control System From the Rear Panel
1Using the Rear Climate Control System From the Rear Panel
When the rear lock mode is off, the temperature of
the rear passenger compartment can be controlled
independently.
Rear floor
vents
Back of the
console
compartment
vents
Rear Fan Control
Buttons
(ON/OFF) Button
Rear Temperature
Control Buttons
Rear AUTO Button
Back of the
console
compartment
and floor vents
23 ACURA MDX-31TYA6100.book 240 ページ ２０２２年２月４日 金曜日 午前１０時２５分
uuClimate Control SystemuAutomatic Climate Control Sensors
Controls
Automatic Climate Control Sensors
The automatic climate control system is
equipped with sensors. Do not cover or spill
any liquid on them.
Sensor
Sensor
23 ACURA MDX-31TYA6100.book 241 ページ ２０２２年２月４日 金曜日 午前１０時２５分
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Acura 2023 MDX boasts an advanced automatic climate control system that maintains your desired cabin temperature. With its intuitive controls, you can effortlessly adjust the temperature, fan speed, and airflow direction to suit your comfort level. The system also features a recirculation mode to prevent outside odors from entering the vehicle, and a synchronization mode to ensure consistent temperature throughout the cabin. Additionally, the rear climate control system allows rear passengers to customize their temperature settings, making every journey comfortable for everyone on board.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI