clage EWT Installation guide

Type
Installation guide
09.16
vod k použití a k montáži
Operating and installation instructions
Umyvadlová páková baterie EWT
Single lever basin mixer EWT
cz > 2
en > 2
1 5
2
3
B
A
4
G1/2
IK TT
6
80 min
80 min
15 min
3Nm
9
80
43
7
8
?
bar °C
90°
G1 1/4
30-50
Ø63
69
112
151
min.350
max.30
max.150
3xG3/8
20°
50
175
87
35 +2
- 1
Technické změny, odchylky ve vzhledu a chyby textu jsou vyhrazeny.
Subject to technical changes, design changes and errors. 9120-50000 09.16 B665290
CLAGE CZ s.r.o.
Trojanovice 644
744 01 Trojanovice
Tel.: +420 596 550 207
Plastic surfaces and fittings should only be
wiped with a damp cloth. Do not use abra-
sive or chlorine-based cleaning agents or
solvents.
For a good water supply, the outlet fittings
(special tap aerators and shower heads)
should be unscrewed and cleaned at regular
intervals. Every three years, the electri-
cal and plumbing components should be
inspected by an authorised professional
in order to ensure proper functioning and
operational safety at all times.
Plastové povrchy a tvarovky by měly být
otřeny pouze vlhkým hadříkem. Nepoužívejte
abrazivní čisticí prostředky ani rozpouštědla
na bázi chloru.
Pro správný průtok vody je třeba pravidelně
vyčistit výstupní část armatury (vyšroubovat
speciální provzdušňovací perlátory a sprcho-
vé hlavice). Každé tři roky musí být elektrické
a instalatérské komponenty zkontrolovány
autorizovaným odborníkem, aby bylo zajiště-
no řádné fungování a provozní bezpečnost
po celou dobu životnosti.
Čištění a údržba Cleaning and maintenance
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

clage EWT Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages