2. Angelo Decor
  3. AD97610

Angelo Decor AD97610, AD97620 Operating instructions

  • I've reviewed the Angelo Decor Fountain user manual for the AD97620 model. This document provides instructions for installing the fountain and operating it with either a solar or electric pump. It also has a recommendation to not return the unit to point of purchase, but rather to seek help online. I'm ready to answer your questions about the fountain setup and operation.
  • Where can I find more information or warranty details?
    What should I do before starting the installation?
    How full should I fill the bowl with water?
    How to decide which pump to use?
T
hank you for buyin
g
an An
g
elo Decor Fountain!
We ho
p
e
y
ou will find these instructions hel
p
ful in settin
g
u
p
y
our fountain. If
y
ou need mor
e
information to
p
ro
p
erl
y
care for
y
our fountain,
p
lease DO NOT return the unit to
p
lace of
p
urchase.
Please visit our web site, www.an
g
elodecor.com, for assistance and warrant
y
information.
First un
p
ack carton carefull
y
, arran
g
in
g
p
arts safel
y
in
y
our workin
g
area
.
Lay out all parts. Decide if you are going to use the solar or electric pump, based on your location. Remember that you will
need direct sunlight on the "solar rock" for this pump to work. We recommend installing both pumps as shown.
Pass the power cords through the standpipe in bowl, and pedestal.
Pump cord through pedestal into groove at bottom. Twist and loct bowl to pedestal, note the proper tree branch line up.
Make sure you leave enough cord in bowl for pumps to sit flat on bottom of pump cavity.
Attach chosen pump to tubing. Twist and lock top into place. Attach cord to solar rock if that option is chosen.
Now simply fill with clean water and plug into a grounded GFCI outlet
We recommend kee
p
in
g
bowl 3/4 full of water to avoid
p
um
p
burnout
.
/