2. COOPER LIGHTING SOLUTION
  3. C6RV042
C6RV042

COOPER LIGHTING SOLUTION C6RV042 User manual

  • Hello! I've reviewed the datasheet for Cooper Lighting Solutions C6RV042, C6IV042, 6050, and 6051 downlights. This document details the specifications for these 6-inch aperture downlights, which are designed for use with 26W or 32W Triple Twin Tube 4-pin lamps. Key features include a precisely formed reflector with 55° cutoff, low iridescent finish, electronic ballast, and adjustable socket. I'm ready to answer your questions about these products.
  • What type of lamps are compatible with this downlight?
    What is the purpose of the reflector?
    What are the standard features of this downlight?
    What kind of ballast this downlight uses?
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
PORTFOLIOTM
SPECIFICATION FEATURES
Reflector
.050 thick aluminum, in a one
piece spun macrofocal parabolic
contour. Available in a variety of
Alzak® finishes. Positive reflector
mounting pulls trim tight to ceiling.
Trim Ring Options
Self flanged or molded white trim
ring. Rimless trim ring accessories
available.
Socket Connector
One piece vented and finned die
cast aluminum cap for maximum
thermal performance.
Housing Construction
Galvanized steel plaster ring
accommodates up to 1" ceiling
thickness.
Conduit Fittings
Die cast screw tight connectors.
Socket
4 pin GX24q-3 base with fatigue
free stainless steel lamp spring
ensures positive lamp retention.
Electronic Ballast
Electronic ballast provides full
light output and rated lamp life.
Provides flicker free and noise free
operation and starting. End of lamp
life protection is standard.
Labels
cULus listed, standard damp label.
C6RV042
C6IV042
6050/6051
26W or 32W
TTT or PLT
Compact Fluorescent
STEPREPEAT>
6-Inch Remodel/International
Vertical Open Downlight
Low brightness 6-inch aperture reflector for use with 26W or 32W Triple
Twin Tube 4-pin lamps for below ceiling installation. The precisely
formed non-imaging reflector ensures 55° cutoff to lamp and lamp image
and the one piece design eliminates light leaks at the ceiling. Standard
features include low iridescent finish on all reflector colors to eliminate
"rainbowing". One electronic ballast operates 26W and 32W triple lamps.
Venting ensures maximum lamp life and lumen output. Adjustable socket
locks lamp into optimal position and cannot be disturbed by normal
maintenance. Medium beam, wide beam, lensed, and open wall wash
reflectors are interchangeable within the same housing.
DESCRIPTION
5-11/16" [145mm]
8-3/16"
[224mm]
7" [178mm]
12-3/8 [316mm]
6-3/8" [162mm]
11-1/4"
[287mm]
REMODEL
5-11/16" [145mm]
8-3/16"
[224mm]
7" [178mm]
Adjustable
6-3/8" [162mm]
11-1/4"
[287mm]
INTERNATIONAL
Adjustable
Catalog # Type
Date
Project
Comments
Prepared by
ENERGY DATA
26W TTT 4-pin
Ballast: Electronic
120V Input Watts: 29 Line Amps: 0.25
277V Input Watts: 26 Line Amps: 0.09
Power Factor: >0.99 THD: <90%
Min. Starting Temperature: -10°C (15°F)
Sound Rating: Class A Standards
32W TTT 4-pin
Ballast: Electronic
120V Input Watts: 36 Line Amps: 0.32
277V Input Watts: 36 Line Amps: 0.16
Power Factor: >0.99 THD: <10%
Min. Starting Temperature: -10°C (10°F)
Sound Rating: Class A Standards
NOTES: Accessories should be ordered separately. For additional
options, please consult your Cooper Lighting Solutions
Representative. Alzak is a registered trademark of Aluminum
Company of America.
ADP110876
2014-08-18 09:14:31
Discontinued
09-20-2021
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
EXAMPLE: C6RV042ECP 6051LI WF=6" CFL Vertical Wide Beam Remodel Downlight, (1) 26/32 Watt TTT lamp with 120/277 Volt, Chicago Plenum, Self Flanged with Specular Clear Finish
TRM6=Metal Trim
Ring, Specify Finish 1
TRR6=Rimless Trim
Ring, White 1
FK5= 5 Amp Field
Installable Fuse Kit
300V Max
DT6=Deco trim 1
ABR6P=Remodel
Adaptor Ring for 7˝ OD
ABR7P=Remodel
Adaptor Ring for 8˝ OD
ABR8P=Remodel
Adaptor Ring for 9˝ OD
EM=Emergency Module
with RemoteTest Switch
E=120/277V 50/60 Hz Electronic
3E=347V 50/60 Hz Electronic
D5LT26=26W 120-277V Fifth Light
(DALI Dimming)
D5LT32=32W 120-277V Fifth Light
(DALI Dimming)
3D5LT26/32=26W 347V Fifth Light
(DALI Dimming)
D26/32=26 or 32W 120-277V Dimming Lutron
EcoSystem/3-Wire Control (Factory Wired for 3-Wire)
EDR26=DeRated Wattage Label, 26W
EDR32=DeRated Wattage Label, 32W
D26MARKVII=26W 120-277V Advance MARK7
D32MARKVII=32W 120-277V Advance MARK7
1D26MARKX=26W 120V Advance MARK 10
1D32MARKX=32W 120V Advance MARK 10
2D26MARKX=26W 277V Advance MARK 10
2D32MARKX=32W 277V Advance MARK 10
6051=Wide Beam
Downlight Reflector,
Self Flanged
6050=Wide Beam
Downlight Reflector,
Polymer Trim Ring
LI=Specular Clear
H=Semi-Specular
Clear
WMH=Warm Haze
G=Specular Gold
WH=Wheat
W=Gloss White
GP=Graphite
GPH=Graphite Haze
B=Specular Black
W=Gloss White
WF=White
painted
Flange (Self
Flanged only)
AccessoriesOptions
OptionsBallast FinishReflector
Housing
C6RV042=6" CFL
Vertical
Remodel,
(1) 26W TTT
(1) 32W TTT or PLT
C6IV042=6"
CFL Vertical
International,
(1) 26W TTT
(1) 32W TTT or PLT
Notes: 1 Order trim with polymer trim ring
(Consult specification sheet for ordering information and options).
ORDERING INFORMATION
Beam diameter is to 50% of maximum footcandles,
rounded to the nearest half-foot.
Footcandle values are initial, apply appropriate
light loss factors where necessary.
26W PLT = .94
EM Multiplier:
(in emergency mode):
EM = .28
Distance
Fixture to
Lighted Plane
Initial
Footcandles
at Nadir
Beam
Diameter
Zonal Lumen Summary
Zone Lumens %Fixture
0-30 482 42.7
0-40 777 68.9
0-60 1124 99.6
0-90 1129 100.0
90-180 0 0.0
0-180 1129 100.0
Candlepower Distribution Curve
Test No. H22195
C6RV042 6050LI
Lamp = 32W PLT
Lumens = 2400
Spacing Criterion = 1.3
Efficiency = 47.0%
18
13
9
5
4
3
7'6"
9'0"
11'0"
13'6"
16'6"
19'0"
5'6"
6'6"
8'0"
10'0"
12'0"
14'0"
Candela Distribution
Degrees
Vertical CD
0 546
5 561
15 588
25 568
35 475
45 330
55 107
65 4
75 0
85 0
90 0
Cone of Light
Luminance
Degrees
Vertical CD/SQ M
45 28429
55 11378
65 548
75 0
85 0
Downlight
80°
60°
70°
40°
50°
30°10° 20°
100
200
300
400
500
600
C6RV042 C6IV042 6050/6051
Distance
Fixture to
Lighted Plane
Initial
Footcandles
at Nadir
Beam
Diameter
Zonal Lumen Summary
Zone Lumens %Fixture
0-30 598 46.2
0-40 940 72.6
0-60 1291 99.6
0-90 1296 100.0
90-180 0 0.0
0-180 1296 100.0
Candlepower Distribution Curve
Test No. H22186
C6RV042 6050LI
Lamp = 32W TTT
Lumens = 2400
Spacing Criterion = 1.2
Efficiency = 54.0%
26
19
12
8
5
4
6'6"
7'6"
9'6"
12'0"
14'0"
16'6"
5'6"
6'6"
8'0"
10'0"
12'0"
14'0"
Candela Distribution
Degrees
Vertical CD
0 783
5 796
15 741
25 676
35 550
45 338
55 104
65 0
75 0
85 0
90 0
Cone of Light
Luminance
Degrees
Vertical CD/SQ M
45 29109
55 11070
65 562
75 0
85 0
Downlight
80°
60°
70°
40°
50°
30°10° 20°
Beam diameter is to 50% of maximum footcandles,
rounded to the nearest half-foot.
Footcandle values are initial, apply appropriate
light loss factors where necessary.
150
300
450
600
750
900
26W PLT = .82
EM Multiplier:
(in emergency mode):
EM = .28
PHOTOMETRICS
ADP110876
2014-08-18 09:14:31
Discontinued
09-20-2021
/