FUNSNAP Capture π Foldable Gimbal Stabilizer User guide

Hello! I've reviewed the user manual for the FUNSNAP Capture π Gimbal. The document provides clear steps for downloading the app, assembling the gimbal, mounting your phone, and connecting it via Bluetooth. I'm ready to answer any specific questions you may have about operating this device.
How do I download the necessary app?

How do I properly secure the phone to the clamp?

How do I power on the gimbal?

Capture Your Moment

Capture π

01 Download "Capture2" APP

Scan the QR code on the left side or

search for "Capture2" on

Google Play / App Store

then download and install it.

Rotate the gimbal arm by

180 degrees in the

direction indicated.

Rotate to Unfold Unfolded

Rotate the gimbal arm by 180

degrees in the direction indicated

until a click is heard. Adjust the phone

clamp as necessary.

04 Boot up 05 Fold back

1 2 3 4

Long press the

power button for

3 seconds

to boot up

Turn on the

bluetooth of

your phone

Open the

“Capture2” App

Connect

the Gimbal

02 Unfold the gimbal 03 Secure the phone to the clamp

The position of clamp is around 5mm off to the center of the phone to be in balance.

Make sure the lens of the phone camera is at the left side of the clamp.

Extend the clamp

place your phone into it. Front view Back view

Rotate to Fold Folded

Capture 2

Capture π