Warning:
- Any wrong installation or adjustment may cause danger. Please contact professionals to repair it.
- Please do not put any flammable and explosive items beside the product.
- This product can’t be processed by any person with Physiological perception or psychology
obstacles (including children).
- Please supervise the children to confirm they will not touch the machine.
- If the machine will be used by the third party, please give them the manuel at the same time.
- If the machine will be put close to the wall, or other board, the board or wall must be made by
nonflammable material. Please be careful of the fire.
Notice:
1.1 Storage and carriage
Please be careful in the transportation. The product should be kept in the warehouse without corrosive
gases. When it is left open air temporarily, please take rain protection.
1.2 Installation
1) The cup warmer should be pot on a steady and fixed position away from direct sunshine and raining.
2) The power voltage using for this machine must be matched with the supplied power voltage marked on
the product. The undulation of voltage should be at +-10%.
3) Suitable power switch, fusion and creep age protecting switch should be installed near the machine.
Don’t put any sundries in front of the switch for a convenient operation.
4) Grounding wire and cable are from the same line and should be plug to a three-phase plug accorded
with safety standard.
5) Inflammables and explosives can not be put close to the machine. The environment temperature should
be less than 45℃, and the relative humidity should be less than 85%.
6) This machine should be installed by professionals.
1.3 Special notice
1). This machine is not suitable for family use. It should be processed by professional chef.
2). Don’t shake the machine when it is working.
3). Don’t disassembly or modify the machine
4). Don’t open the shell of the machine
5). Please unplug the switch before cleaning
6). Please don’t spray water on the machine when cleaning
7). Don’t put heavy items on the machine or pat it
8). Don’t touch the shell of the machine when it’s working. Be careful of the high temperature.
9). Unplug the switch when thundering
10). Don’t use hard or sharp material to damage the control board.
11). Keep the power off after it finish work
12). Repairing must be performed by professionals
13). If the switch wire is damaged, please contact the producer or ask professional to replace it
How to use:
2.1. The power voltage using for this machine must be matched with the supplied power voltage marked
on the product.
2.2. Before the cups were put on the layers, please dry it using cleaning cloth.
2.3. Don’t take the cups from the machine with water on the hands.
2.4. Please keep the power off when not working.
2.5. Don’t use corrosive water or cleaner to wash the machine.
