15
Operation and use
ched immediately independent of the
slide control setting.
By pressing and holding one of the
"turbo" keys, the maximum speed is
achieved. After the "turbo" key is relea-
sed, the appliance returns to the speed
previously set by the slide control. The
"turbo" keys are mechanically locked
when the slide control is at the "0" set-
ting.
• At the top of the appliance there is a
handle cover made of a material which
makes handling of the appliance easier.
The power cable can be wrapped aro-
und this handle.
• At the bottom of the appliance there are
two openings next to each other for the
kneading hooks or the mixer attach-
ments.
The mixer attachments are used for
mixing egg whites, yolks with sugar,
creams and for mixing omelettes and
egg cakes.
The kneading hooks are used for cake
mixtures, bread mixture, gingerbread
mixture etc.
The mixer attachments and the knea-
ding hooks are inserted with a little
pressure into the holes on the lower
part of the appliance and clicked into
position. Wrong insertion means that
the attachments will fall out during ope-
ration
• The appliance has five operating levels.
To set the speed, move the slide control
to the settings: 0, 1, 2, 3, 4 and 5 on the
ejection key.
The appliance can be switched off by
switching the slide control to „0“.
By switching the slide control from "0"
to the right, the appliance is switched
on.
The settings 1 to 5 indicate the follo-
wing operating levels. By switching the
slide control towards the setting 5 the
speed is increased.
• The release key is positioned next to
the slide control. This releases the
kneading hooks or the mixer attach-
ments. This key has a locking function
which prevents the parts from being
accidentally released during operation.
• The appliance also has two "turbo"
keys, one on the left and one on the
right of the appliance for right-handed
and left-handed users. The "turbo" key
allows the maximum speed to be rea-