Please read this manual carefully before operating
your set and retain it for future reference.
LAP440W (LAP440W, S54A2-D)
OWNER’S MANUAL
ENGLISH
www.lg.com
SoundPlate™
LAP440W
LAP440W-NE_BSGPLLK_ENG.indd 1 2014-07-09 10:04:21
LAP440W-NE_BSGPLLK_ENG.indd 2 2014-07-09 10:04:21
1 Getting Started
Getting Started 3
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage
within the product’s enclosure
that may be of sucient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
NOTICE: For Product Identication and
Compliance/Safety labeling information please
refer to Main Label on the bottom of Unit.
LAP440W-NE_BSGPLLK_ENG.indd 3 2014-07-09 10:04:23
Getting Started4
Getting Started
1
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery from the
equipment: Remove the old battery or battery
pack, follow the steps in reverse order than
the assembly. To prevent contamination of the
environment and bring on possible threat to
human and animal health, the old battery or
the battery put it in the appropriate container
at designated collection points. Do not dispose
of batteries or battery together with other
waste. It is recommended that you use local,
free reimbursement systems batteries and
accumulators. The battery should not be exposed
to excessive heat such as sunshine, re etc.
LAP440W-NE_BSGPLLK_ENG.indd 4 2014-07-09 10:04:23
Table of Contents 5
1
2
3
4
5
Table of Contents
1 Getting Started
3 Safety Information
6 Unique features
6 Introduction
6 – Symbols used in this manual
6 Accessories
7 Remote control
8 Front panel
9 Rear panel
10 Setting up the unit
2 Connecting
13 Wireless subwoofer connection
14 Connecting to your TV
14 – Using an OPTICAL cable
14 – Using an HDMI cable
15 – What is SIMPLINK?
15 – ARC (Audio Return Channel) function
16 – Additional information for HDMI
17 Optional equipment connection
17 – HDMI connection
18 – OPTICAL IN connection
18 – USB connection
18 – Compatible USB devices
18 – USB device requirement
19 – Playable file
3 Operating
20 Basic operations
20 – USB operation
21 Other operations
21 – DRC (Dynamic Range Control)
21 – AV Sync
21 – Turn off the sound temporarily
21 – Displaying file and input source
21 – Sleep timer setting
22 – AUTO POWER On/Off
23 – Auto function change
24 LG Sound Sync
24 – With wired connection
25 – With wireless connection
25 Using Bluetooth technology
26 – Listening to music stored on the
Bluetooth devices
27 Using Bluetooth App
27 – Install “LG Bluetooth Remote” App
onto Your Bluetooth Device
28 – Activate Bluetooth with “LG Bluetooth
Remote” App
29 Sound adjustment
29 – Setting sound effect
29 – Adjust volume level automatically
29 – Adjust the woofer level settings
30 Controlling a TV with the supplied remote
control
30 – Setting up the remote to control your
TV
4 Troubleshooting
31 Troubleshooting
5 Appendix
33 Trademarks and licenses
34 Specifications
35 Maintenance
35 – Handling the unit
LAP440W-NE_BSGPLLK_ENG.indd 5 2014-07-09 10:04:23
Getting Started6
Getting Started
1
Unique features
Auto power down
This unit will turn o by itself for energy saving
consumption.
Speaker (easy) setup
Listen to sound from TV, DVD or Digital device with
vivid 4.1 ch mode.
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
LG Bluetooth Remote
"LG Bluetooth Remote" is an App designed to
let you take control of some of LG’s latest Audio
devices.
Introduction
Symbols used in this manual
,
Note
Indicates special notes and operating features.
>
Caution
Indicates cautions for preventing possible damages
from abuse.
Accessories
Please check and identify the supplied accessories.
Designs and specications of the accessories are
subject to change without prior notice.
Remote control (1) Batteries (2)
Power cord (1) Cable ties for arranging
cables (2)
USB extension cable (1) Optical cable (1)
LAP440W-NE_BSGPLLK_ENG.indd 6 2014-07-09 10:04:29
Getting Started 7
Getting Started
1
Remote control
Battery Installation
Remove the battery cover on the rear of the
Remote Control, and insert two R03 (size AAA)
batteries with and matched correctly.
• • • • • • • • • •
a
• • • • • • • • •
1
(Power) : Switches the unit ON or OFF.
FUNCTION : Selects the function and the input
source.
FOLDER
W/S
: Searches a folder on USB device.
OPTICAL : Changes input source to OPTICAL
directly.
MUTE
i
: Mutes the sound.
VOL
o
/
p
: Adjusts speaker volume.
• • • • • • • • • •
b
• • • • • • • • •
AUTO POWER : Turns on or o AUTO POWER
function. (Refer to the page 22.)
AV SYNC : Synchronizes the audio and video.
INFO : Displays the information of a le or an input
source.
REPEAT : Listen to your les repeatedly or
randomly.
C/V
(Skip/Search) :
- Skips Fast backward or Forward.
- Searches for a section within a le.
Z
(Stop) : Stops playback.
d/M
(Play/Pause) : Starts playback. / Pauses
playback.
SOUND EFFECT : Selects a sound eect mode.
AUTO VOLUME : Turns on and o the AUTO
VOLUME mode.
WOOFER LEVEL : Sets the sound level of woofer.
• • • • • • • • • •
c
• • • • • • • • •
0 to 9 numerical buttons : Selects a le directly.
DRC : Turns on or o DRC function.
SLEEP : Sets the system to turn o automatically at
a specied time.
• • • • • • • • • •
d
• • • • • • • • •
TV Control buttons : See page 30.
LAP440W-NE_BSGPLLK_ENG.indd 7 2014-07-09 10:04:33
Getting Started8
Getting Started
1
A
1/!
(Standby/On)
B
p/o
(Volume)
Adjusts volume level.
C
F (Function)
Selects the function and input source.
D
Standby LED
It lights up in red on standby mode.
E
Display window
F
Remote sensor
Precautions in using the touch buttons
y
Use the touch buttons with clean and dry
hands.
- In a humid environment, wipe out any
moisture on the touch buttons before
using.
y
Do not press the touch buttons hard to
make it work.
- If you apply too much strength, it can
damage the sensor of the touch buttons.
y
Touch the button that you want to work in
order to operate the function correctly.
y
Be careful not to have any conductive
material such as metallic object on the
touch buttons. It can cause malfunctions.
>
Caution
Front panel
LAP440W-NE_BSGPLLK_ENG.indd 8 2014-07-09 10:04:34
Getting Started 9
Getting Started
1
A
USB port
B
OPT. IN : Optical input
C
HDMI IN / OUT : HDMI input / output
D
AC IN
Rear panel
LAP440W-NE_BSGPLLK_ENG.indd 9 2014-07-09 10:04:35
Getting Started10
Getting Started
1
Setting up the unit
This unit is designed to be positioned under your
TV.
Before setting up this system with your TV, make
sure your TV's specications.
y
Weight
Max. 38 kg
y
Size of the base
Max. 680 mm
Max. 270 mm
y
Do not try to set up this unit alone. It may
need at least 2 persons to lift your TV.
Otherwise it may result in a personal injury
and/or property damages.
y
Do not connect a CRT type TV to this unit.
Because this unit contains magnetic parts,
colour irregularity may occur on the TV
screen.
y
Do not put the other objects except a TV or
a monitor on the unit.
y
The unit must be set up on a stable and
horizontal surface.
y
Do not put any other objects between the
unit and the mounting surface when you
set up the unit.
>
Caution
It is recommended to set up the unit on a
suciently rm and horizontal surface.
,
Recommendation
1. Place the unit on the position where you want
to place your TV.
LAP440W-NE_BSGPLLK_ENG.indd 10 2014-07-09 10:04:38
Getting Started 11
Getting Started
1
2. Connect all the cables of external devices you
want to use such as TV, Blu-ray disc player or
DVD player. A USB extension cable and a power
cord supplied as accessories are also connected.
Because it is dicult to make a connection
after installing this unit, you should connect
the cables before installation.
>
Caution
TV
Blu-ray disc
player, DVD
player, etc.
Power cord
For more information of connections and
operations, refer to the pages below.
(O) Optical : See page 14 and page 18.
(H) HDMI : See page 14 and page 17.
(U) USB : See page 18.
3. Place your TV on the center of the unit.
y
Be careful not to hide control buttons on
the top of this unit when you put your
TV on the unit.
y
Put the distance of the base of your TV
and the edge of the unit.
Available zone
(Top of the unit)
20 mm10 mm 10 mm
30 mm
>
Caution
4. Plug in the power cord of the unit.
LAP440W-NE_BSGPLLK_ENG.indd 11 2014-07-09 10:04:40
Getting Started12
Getting Started
1
y
Do not place your TV on the edge of this
unit. Otherwise it may result in a personal
injury and/or property damages.
y
If your TV is over recommended weight
(max 38 kg) or has a Base larger in area than
the Unit do NOT place TV on the Unit.
-
In this case, it is recommended to place this
system in another location such as on the
shelf under the TV.
>
Caution
LAP440W-NE_BSGPLLK_ENG.indd 12 2014-07-09 10:04:43
2 Connecting
Connecting 13
Connecting
2
Wireless subwoofer
connection
LED indicator of wireless subwoofer
LED Color Status
Green
(Blink)
The connection is trying.
Green The connection is completed.
Red The wireless subwoofer is
in standby mode or the
connection is failed.
O (No
display)
The power cord of wireless
subwoofer is disconnected.
Setting up the wireless subwoofer
for the first time
1. Connect the power cord of the wireless
subwoofer to the outlet.
2. Turn on the main unit : The main unit and
wireless subwoofer will be automatically
connected.
Manually pairing wireless subwoofer
When your connection is not completed, you can
see the red LED or the blinking of green LED on
the wireless subwoofer and the subwoofer does
not make sound. To solve the problem, follow the
below steps.
1. Adjust volume level of the main unit to
minimum.
-
”VOL MIN” appears on the display window.
2. Press and hold MUTE
i
(Mute) on the remote
control for about 3 seconds.
-
“W RESET” appears on the display window
briey.
3. If the LED of the wireless subwoofer already
blinks in green continually, you can skip this
step.
Press and hold PAIRING on the back of the
wireless subwoofer for more than 5 seconds.
-
The LED of the wireless subwoofer lights up
alternately in red and green.
4. Disconnect the power cord of the main unit
and the wireless subwoofer.
5. Connect them again after the LED of the main
unit and the wireless subwoofer is fully turned
off.
The main unit and the wireless subwoofer will
be paired automatically when you turn on the
main unit.
-
When the connection is completed, you can
see the green LED on the subwoofer.
y
It takes a few seconds (and may take longer)
for the main unit and the subwoofer to
communicate with each other and make
sounds.
y
The closer the main unit and the subwoofer,
the better sound quality. It is recommended
to install the main unit and the subwoofer
as close as possible (within 5 m) and avoid
the cases below.
-
There is a obstacle between the main
unit and the subwoofer.
-
There is a device using same frequency
with this wireless connection such as a
medical equipment, a microwave or a
wireless LAN device.
,
Note
LAP440W-NE_BSGPLLK_ENG.indd 13 2014-07-09 10:04:44
Connecting14
Connecting
2
Connecting to your TV
Please connect with this unit and TV using the
optical digital cable or HDMI cable considering the
state of the TV.
Using an OPTICAL cable
1. Connect the OPT. IN jack on the back of the
unit to OPTICAL OUT jack on the TV using an
OPTICAL cable.
Optical cable
2. Set the INPUT source to OPTICAL. Press
repeatedly FUNCTION on the remote control or
F on the unit until the function is selected.
To directly select the OPTICAL function, press
OPTICAL on the remote control.
y
You can enjoy the TV audio through the
speakers of this unit. In the case of some
TV models, you must select the external
speaker option from the TV menu. (For
details, reference your TV user manual.)
y
Set up the sound output of TV to listen to
the sound through this unit :
TV setting menu
[
[Sound]
[
[TV Sound
output]
[
[External speaker (Optical)]
y
Details of TV setting menu vary depending
on the manufacturers or models of your TV.
,
Note
Using an HDMI cable
If you connect this unit to a TV that supports HDMI
CEC and ARC (Audio Return Channel), you can
enjoy the TV audio through the speakers of this unit
without connecting the optical cable.
HDMI cable
y
HDMI CEC (Consumer Electronics Control):
Using a single remote control, you have the
ability to operate CEC compatible devices
(TV, Sound Bar, Blue-ray player, etc.)
y
You can also enjoy extra functions such as
USB / Bluetooth with FUNCTION on remote
control or F on this unit. When you go back
to live TV channel after using the extra
functions (USB / Bluetooth) of this audio
system, you should choose your preferred
speaker on TV to enjoy the sound from this
audio system again.
,
Note
HDMI cable Checklist
Some HDMI cables do not support the ARC
function, this can result in no sound output.
When connecting this unit to the TV, if there is no
sound, there might be a problem with the HDMI
cable. Therefore connect this unit to the TV and
check whether the Type A, High speed HDMI™
Cable with Ethernet.
STANDARD HDMI CABLE WITH ETHERNET
HIGH SPEED HDMI CABLE
HIGH SPEED HDMI CABLE WITH ETHERNET
(X)
(X)
(O)
LAP440W-NE_BSGPLLK_ENG.indd 14 2014-07-09 10:04:47
Connecting 15
Connecting
2
Enjoy rich sound broadcast of the
channel with the unit
Connection through HDMI Cable
Your television must support the newest HDMI
features (HDMI CEC
1)
/ ARC (Audio Return Channel))
to fully enjoy the Live broadcasting channel with
audio system through an HDMI cable. Unless your
TV supports these HDMI features, the audio system
should be connected through an OPTICAL cable.
1) HDMI CEC (High-Denition Multimedia Interface
Consumer Electronics Control)
Consumer Electronics Control (CEC) is an HDMI
feature designed to allow the user to command
and control the CEC-enabled devices, that are
connected through HDMI by using only one of
their remote controls.
※
Trade names for CEC are SimpLink (LG) , Anynet+
(Samsung), BRAVIA Sync (Sony), EasyLink (Philips),
etc.
What is SIMPLINK?
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
Controllable functions by LG TV’s remote control :
Power on/o, volume up/down, etc.
Refer to the TV owner’s manual for the details of
SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as
shown above.
y
Depending on the state of the unit, some
SIMPLINK operation may dier from your
purpose or not work.
y
Depending on a TV or a player which
is connected with this unit, SIMPLINK
operation may dier from your purpose.
,
Note
ARC (Audio Return Channel)
function
The ARC function enables an HDMI capable TV to
send the audio stream to HDMI OUT of the unit.
To use this function :
-
Your TV must support the HDMI-CEC and ARC
function and the HDMI-CEC and ARC must be
set to On.
-
The setting method of HDMI-CEC and ARC may
dier depending on the TV. For details about
ARC function, refer to your TV manual.
-
You must use the HDMI cable (Type A, High
Speed HDMI™ cable with Ethernet).
-
You must connect the HDMI OUT on the unit
with HDMI IN of the TV that supports ARC
function using an HDMI cable.
-
You can connect only one unit to TV compatible
with ARC.
y
ARC function is automatically selected when
ARC signal comes in from TV, no matter
what kind of the function you are using.
y
You can enjoy the TV audio through the
speakers of this unit. In the case of some
TV models, you must select the external
speaker option from the TV menu. (For
details, reference your TV user manual.)
y
Set up the sound output of TV to listen to
the sound through this unit :
TV setting menu
[
[Sound]
[
[TV Sound
output]
[
[External speaker (HDMI ARC)]
y
Details of TV setting menu vary depending
on the manufacturers or models of your TV.
,
Note
LAP440W-NE_BSGPLLK_ENG.indd 15 2014-07-09 10:04:48
Connecting16
Connecting
2
Additional information for
HDMI
y
When you connect an HDMI or DVI compatible
device make sure of the following:
- Try switching off the HDMI/DVI device and this
player. Next, switch on the HDMI/DVI device
and leave it for around 30 seconds, then switch
on this player.
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720 x 576p, 1280 x 720p, 1920 x 1080i or
1920 x 1080p video input.
y
Not all HDCP-compatible HDMI or DVI devices
will work with this player.
- The picture will not be displayed properly with
non-HDCP device.
y
If a connected HDMI device does not accept
the audio output of the player, the HDMI
device’s audio sound may be distorted or
may not output.
y
Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn o the player and then turn it
on again.
y
When the HDMI connection with HDCP
is not veried, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
y
If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m(15 ft).
y
You cannot change the video resolution
in the HDMI IN mode. Change the video
resolution of the connected component.
y
If the video output signal is abnormal when
your personal computer is connected to
HDMI IN jack, change the resolution of your
personal computer to 576p, 720p, 1080i or
1080p.
,
Note
LAP440W-NE_BSGPLLK_ENG.indd 16 2014-07-09 10:04:48
Connecting 17
Connecting
2
Optional equipment
connection
HDMI connection
For enjoying sound only
You can enjoy the sound from the external device
you connect.
To the Blu-ray disc player, DVD player,
etc.
1. Connect HDMI IN jack on the back of the unit to
HDMI OUT jack on the audio device such as Blu-
ray disc player, DVD player, etc.
2. Set the INPUT source to HDMI IN. Press
repeatedly FUNCTION on the remote control or
F on the unit until the function is selected.
For enjoying both sound and picture
You can enjoy both sound and picture from the
external device you connect.
1. Connect HDMI IN jack on the back of the unit to
HDMI OUT jack on the external device such as
Blu-ray disc player, DVD player, etc.
2. Connect HDMI OUT jack on the back of the unit
to HDMI IN jack on the TV.
3. Set the INPUT source to HDMI IN. Press
repeatedly FUNCTION on the remote control or
F on the unit until the function is selected.
y
With the unit connected to external devices
and TV as above illustration, TV will output
picture and sound from external devices
when the unit is turned o in HDMI IN
mode.
y
HDMI OUT jack is for TV connection. Even
though PCM multi channel is inputted to
the unit through an HDMI cable, the unit
can only output 2 channel to TV.
y
Audio sources without any transformation
pass through this unit when this unit is
turned o.
,
Note
LAP440W-NE_BSGPLLK_ENG.indd 17 2014-07-09 10:04:50
Connecting18
Connecting
2
OPTICAL IN connection
Connect an optical output jack of external devices
to the OPT. IN jack.
To the optical output jack
of external device
Speaker (easy) setup
Listens to sound from TV, DVD or Digital Device
with 4.1 or 4 ch mode.
1. Connect the OPT. IN jack on the back of the unit
to optical out jack of your TV (or digital device
etc.)
2. Select the input source to OPTICAL by pressing
FUNCTION on the remote control or F on the
unit until the function is selected.
To directly select the OPTICAL function, press
OPTICAL on the remote control.
3. Listen to sound with 4.1 or 4 ch speaker.
4. Press OPTICAL to exit from OPTICAL.
Function is retuned to previous one.
USB connection
Connect a USB device to USB extension cable.
USB extension cable
For more information of playing les on a USB, refer
to the page 20.
Removing the USB Device from the unit.
1.
Choose a different function/mode or press
Z
twice in a row.
2. Remove the USB device from the unit.
Compatible USB devices
y
MP3 Player : Flash type MP3 player.
y
USB Flash Drive : Devices that support USB 1.1.
y
The USB function of this unit does not support
some USB devices.
USB device requirement
y
Devices which require additional program
installation connected to a computer, are not
supported.
y
Do not extract the USB device while in operation.
y
For a large capacity USB, it may take longer than
a few minutes to be searched.
y
To prevent data loss, back up all data.
y
This unit is not supported when the total
number of les is 1000 or more.
y
The unit’s USB Port cannot be connected to PC.
The unit can not be used as a storage device.
y
The exFAT le system is not supported on this
unit. (FAT16/FAT32/NTFS systems are available.)
LAP440W-NE_BSGPLLK_ENG.indd 18 2014-07-09 10:04:52
Connecting 19
Connecting
2
y
Depending on some devices, it may not available
to recognize the followings on this unit.
-
External HDD
-
Card readers
-
Locked devices
-
Hard type USB devices
-
USB hub
-
Using USB extension cable
-
iPhone/iPod/iPad
-
Android device
Playable file
Sampling Frequency
MP3 : within 32 to 48 kHz
WMA : within 32 to 48 kHz
OGG : within 32 to 48 kHz
FLAC : within 32 to 192 kHz
WAV : within 32 to 48 kHz
Bitrate
MP3 : within 80 to 320 kbps
WMA : within 56 to 128 kbps
OGG : within 50 to 500 kbps
FLAC : within 500 to 5000 kbps
WAV : within 500 to 5000 kbps
y
Maximum les : Under 999
y
A protected le by DRM (Digital rights
management) cannot be played on the unit.
y
Video les in the USB storage device can not be
played.
y
Depending on the performance of your USB
device, playback may not work well.
y
Folders and les on the USB are recognized
as below.
A
: File
: Folder
*ROOT
B
C
D
E
F
G
H
I
J
a
c
b
d
y
If there is no le in a folder, the folder will
not appear.
y
File will be played from le
$A
to le
$J
one by one.
y
Files and folders will be presented in order
recorded and may be presented dierently
depending on the record circumstances.
y
This unit can display le or folder names
that contain numbers or English characters
only.
y
*ROOT : The rst screen you can see when a
computer recognize the USB is “ROOT”.
,
Note
LAP440W-NE_BSGPLLK_ENG.indd 19 2014-07-09 10:04:53
3 Operating
Operating20
Operating
3
Basic operations
USB operation
1. Connect the USB device to the USB port.
2. Select the USB function by pressing FUNCTION
on the remote control or F on the unit until the
function is selected.
To Do this
Stop Press
Z
.
Playback Press
d/M
.
Pause
During playback, press
d/M
.
Skip to the next/
previous le
During playback, press V
on the remote control to go
to the next le.
Playing less than 2 seconds,
press C on the remote
control to go to the previous
le.
Playing after 3 seconds, press
C on the remote control
to go to the beginning of
the le.
Search for a
section within a
le
Press and hold
C/V
during playback and release it
at the point you want to listen
to. (except FLAC and OGG
les)
Play repeatedly
or randomly
Press REPEAT on the remote
control repeatedly, the
display will be changed in the
following order, OFF
RPT 1
RPT DIR (DIRECTORY) RPT
ALL RANDOM.
Select a le
directly
Press 0 to 9 numerical buttons
on the remote control to go
to the desired le directly.
Search a folder
Press FOLDER
W/S
on the
remote control.
Resume
playback
This unit memorizes a current
song which is played before
changing the function or
turning o the unit.
y
The resume point may be cleared when you
pull out the power cord or removing the
USB device from the unit.
y
Repeat/Random playback operates as
follows.
On Display Description
OFF
Plays songs on USB
device in order.
RPT1
Plays a same song
repeatedly.
RPT DIR
Plays songs in a folder
repeatedly.
RPT ALL
Plays all the songs on
USB device repeatedly.
RANDOM Plays songs randomly.
,
Note
LAP440W-NE_BSGPLLK_ENG.indd 20 2014-07-09 10:04:54
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI