True Fitness Palladium Series Strength User manual

True Fitness
Brand
True Fitness
Model
Palladium Series Strength
Category
Fitness, gymnastics & weight training
Type
User manual
OWNER’S
MANUAL
Model # SPL-XXXX
Note: SPL-0100 shown above, but this is the manual for all of the
Palladium Strength line as the required assembly steps are the
same for each machine.
Revision 051221
Palladium
Strength Line
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 2 of 34
Strength
Palladium Line
IMPORTANT:
All products shown are prototype. Actual product delivered may vary.
Product specications, features & soware are subject to change without notice.
For the most up-to-date owner’s manual please visit www.truetness.com.
For documents in additional languages please visit www.truetness.com/resources/document-library/
IMPORTANTE:
Todos los productos mostrados son prototipos. La realidad el producto suministrado puede diferir.
Especicaciones de productos, características y soware están sujetas a cambios sin previo aviso.
Para la más actualizada de este manual del propietario, por favor visite www.truetness.com
Para los documentos en otros idiomas, por favor visite www.truetness.com/resources/document-library/
IMPORTANT: Tous les produits présentés sont prototype. Le produit réel livré peut varier. Spécications du
produit, caractéristiques et logiciels sont sujettes à modication sans préavis. Pour la plus à jour le manuel du
propriétaire s'il vous plaît visitez www.truetness.com. Pour documents dans des langues supplémentaires,
veuillez www.truetness.com/resources/document-library/ de visite
重要提示： 显示所有产品的原型。实际交付的产品可能有所不同产品规格，功能和软件如有更改，恕不另
行通知迄今为止对于大多数的使用说明书，请访问www.true󼵠tness.com 对于其他语言的文档，请访问
www.true󼵠tness.com/resources/document-library/
ھام:
جمیع المنتجات المعروضة ھي النموذج. قد تختلف المنتج الفعلي تسلیمھا.
مواصفات المنتج، والمیزات والبرامج قابلة للتغییر دون إشعار.
لمعظم ما یصل حتى الآن دلیل المالك یرجى زیارة www.truetness.com.
للمستندات في لغات إضافیة، یرجى زیارة www.truetness.com/resources/document-library/
WICHTIG: Alle hier gezeigten Produkte sind Prototypen. Das tatsächliche Produkt ausgeliefert wird, kann
variieren. Produkt-Spezikationen, Funktionen und Soware können sich ohne vorherige Ankündigung
ändern. In den meisten Fällen bis zu Bedienungsanleitung Bisher besuchen Sie bitte www.truetness.com. Für
Dokumente in weiteren Sprachen nden Sie unter www.truetness.com/resources/document-library/
BELANGRIJK: Alle getoonde producten zijn prototype. Daadwerkelijke product geleverd kan verschillen.
Product specicaties, eigenschappen & soware zijn onderhevig aan verandering zonder kennisgeving. Voor
de meest actuele handleiding van de eigenaar kunt u terecht www.truetness.com. Voor documenten in andere
talen kunt u terecht op www.truetness.com/resources/document-library/
ВАЖНО: Все товары указаны прототипа. Фактический продукт, поставляемый могут отличаться.
Технические характеристики, особенности и программного обеспечения могут быть изменены без
предварительного уведомления. Для получения самой последней на сегодняшний день руководство по
эксплуатации пожалуйста, посетите www.truetness.com
.Для документов на другие языки, пожалуйста, посетите www.truetness.com/resources/document-library/
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 3 of 34
Strength
Palladium Line
A MESSAGE TO OUR CUSTOMERS
Frank Trulaske began TRUE Fitness® over thirty-ve year ago with the simple philosophy of delivering superior
tness products, service, and support. Today, TRUE is the global leader in premium tness equipment for the
commercial and residential markets. Our goal is to be the leader in technology, innovation, performance, safety
and style. TRUE has received many awards for its product over the years and remains the benchmark for the
industry. Fitness facilities and consumers invest in TRUE products for their durable commercial platforms used
in all its products, both commercial and residential alike.
e proud manufacturing tradition of quality and the culture of innovation at TRUE have given rise to a full line
of extraordinary cardio and strength equipment. As a result, people all over the world are beneting from the
TRUE experience. Innovation across the full product line has made TRUE successful and is a trademark of the
TRUE heritage. TRUE’s patented Heart Rate Control technology is just one of the remarkable ways we deliver
simple and superior performance every user can enjoy, and most importantly, use to achieve personal health and
tness goals.
At the heart of our success is the relentless and systematic life testing of both our products and their components.
We have dedicated employees who understand our philosophy is to deliver the best products in the world.
Our goal is to deliver the world’s best premium equipment for our customers’ health and tness solutions.
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 4 of 34
Strength
Palladium Line
Table of Contents
CHAPTER 1: SAFETY INSTRUCTIONS ..........................................................................................................................5
• COMMERICAL MAINTENANCE SCHEDULE ......................................................................9
• COMPLIANCES .............................................................................................................................9
CHAPTER 2: ASSEMBLY GUIDE ...................................................................................................................................10
• MACHINE DIMENSIONS & WEIGHTS TABLE ...................................................................10
• WEIGHT STACK CONFIGURATION TABLE .......................................................................11
• REQUIRED TOOLS .....................................................................................................................12
• LABELS ..........................................................................................................................................12
• WEIGHT AND SHROUD ASSEMBLY STEPS ........................................................................ 13
CHAPTER 3: CARE & MAINTENANCE .......................................................................................................................26
• CARE & MAINTENANCE .........................................................................................................26
• DAILY INSPECTION & MAINTENANCE .............................................................................. 26
• WEEKLY INSPECTION & MAINTENANCE .........................................................................26
• OTHER SCHEDULED PREVENTIVE MAINTENANCE ....................................................27
• CLEANING THE EQUIPMENT ...............................................................................................27
• CABLE INSPECTION & MAINTENANCE ............................................................................. 28
CHAPTER 4: CUSTOMER SERVICE ..............................................................................................................................30
• CONTACTING SERVICE ...........................................................................................................30
• CONTACTING SALES ................................................................................................................30
• REPORTING FREIGHT OR PARTS DAMAGE ......................................................................31
CHAPTER 5: WARRANTY INFORMATION ...............................................................................................................32
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 5 of 34
Strength
Palladium Line
CHAPTER 1: SAFETY INSTRUCTIONS
4
FF
AACCIILLIITTYY
AANNDD
UU
SSEERR
SS
AAFFEETTYY
PP
RREECCAAUUTTIIOONNSS
1. Review and understand all of the warning labels affixed to this machine and on the facility
safety sign.
2. Be certain that the machine operation is understood before it is used. Refer to the
instructional procedure label affixed to the machine.
3. Make sure all users are properly trained on how to use this equipment. If this machine is
being used in a commercial setting, end users may not have access to this owners manual. It is
the responsibility of the facility to instruct users as to the proper usage of the equipment as well
as making them aware of potential hazards. Maximum user weight is 300 lbs (136 kg) unless
otherwise stated in the manual.
4. Use each machine only for the intended exercise. Do not allow anyone to invent exercises not
included on the instructional procedure label or the intended use Label.
5. Do not modify the machine.
6. This equipment meets industry safety standards for stability when used for the intended
exercise. Do not allow straps, resistance bands or other means to be attached to the framework
of this machine to perform stretching or body weight exercises. This can result in machine
instability and lead to serious crushing injuries.
7. Keep children away from this equipment. Adults should closely supervise use by teenagers.
8. It is recommended that users receive a thorough medical exam before commencing an
exercise program. All medical issues should be reviewed to ensure that weight training will not
aggravate pre-existing medical conditions.
9. If the machine appears damaged or inoperable, contact a facility staff member to place an
“OUT OF ORDER, DO NOT USE” sign on the machine until it is repaired. Only use TRUE
supplied replacement components to service this machine.
10.
I
nstruct users not to wear loose or dangling clothes or have headphone wires hanging
when using this equipment.
11. Do not attempt to free any jammed assemblies by yourself as this may cause injury.
12. On Plate Loaded and Free Weight machines:
12a. Use of spotter(s). Instruct users to seek the advice of the facility staff as to the
appropriate use of spotters when lifting. More than one spotter may be required
depending upon the amount of weight being lifted.
12b. Instruct users to load weight plates evenly and carefully to avoid tipping equipment
and crushing injuries.
12c. If the machine is equipped with safety stops or catches, inspect them and verify their
proper operation before use and make sure they are securely in place before using or
exiting the machine. Be certain members are instructed on how to operate and adjust
all safety mechanisms.
SAFETY
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 6 of 34
CHAPTER 1: SAFETY INSTRUCTIONS
Strength
Palladium Line
5
12d. This equipment is designed for standard olympic size weight plates with a 50mm bore
(1.9”).
12e. Do not exceed the maximum weight capacity of the machine. Maximum plate size is
45 lbs. (25 kg.).
13. On Selectorized and Cable equipped machines:
13a. Do not allow users to perform any exercise by holding the end of the cable and/or the
cable end fitting. Use only appropriate handles or attachments properly connected to
the cable end.
13b. Do not high-pin or double-pin the weight stack. Do not allow the machine to be used if
the top plate or weight stack is pinned in a raised position. Use an assistant and
carefully return the machine to the proper position with the cap plate resting on the top
weight. Inspect the entire length of the cable to ensure that it is properly seated in all
of the pulley grooves.
13c. Do not allow the use of weight plates or dumbbells to be used as a means to add
additional weight to the weight stacks. Use only the TRUE adder weight system
specifically designed for the machine.
I
I
N
N
S
S
T
T
A
A
L
L
L
L
A
A
T
T
I
I
O
O
N
N
S
S
A
A
F
F
E
E
T
T
Y
Y
P
P
R
R
E
E
C
C
A
A
U
U
T
T
I
I
O
O
N
N
S
S
1. Read this installation manual entirely before assembling this equipment.
2. Verify that there is adequate space surrounding this piece of equipment for safe access and
operation. Installation must meet ADA requirements for accessibility.
3. Install this piece of equipment on a solid level surface that does not deviate more than 1/8”
over a 10’ distance (or as defined and required by local building and architectural codes.)
4. TRUE strongly recommends that all equipment be anchored to the floor to prevent movement
and increase stability.
• Due to the wide variation of flooring on which the unit can be installed, contact a
qualified contractor to determine an appropriate fastening system for your floor.
• Use 3/8” diameter hardware (10 mm) to anchor the machine. Anchors should have a
minimum pull out force of 220 lb (110 kg) for each position.
• When attaching the machine to the floor, if there is a gap between the machine foot
and the floor, do not use the anchor to remove the gap as this can cause the
machine frame to deform. Instead, place a shim between the bottom of the foot and
the floor, then tighten the anchor.
• Anchoring holes are provided on the feet of the frame. All anchoring locations must
be used when anchoring the equipment to the floor.
5. DO NOT install any fitness equipment near a pool, hot tub or other damp locations. Corrosion
caused by installation in these locations can lead to premature failure of components.
6. Be sure all hardware is tight before using this machine.
7. Some assembly materials may come preassembled in the carton. Refer to Chapter 2:
Assembly Guide for instructions on disassembling assembly materials where appropriate
before beginning assembly.
SAFETY
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 7 of 34
CHAPTER 1: SAFETY INSTRUCTIONS
Strength
Palladium Line
6
M
M
A
A
I
I
N
N
T
T
E
E
N
N
A
A
N
N
C
C
E
E
S
S
A
A
F
F
E
E
T
T
Y
Y
P
P
R
R
E
E
C
C
A
A
U
U
T
T
I
I
O
O
N
N
S
S
1. Refer to the maintenance schedule table in this manual for when to perform maintenance.
2. Check the function of your machine DAILY by verifying the following:
• If equipped with cables, inspect cables and end fittings for any signs of wear.
Replace if worn, frayed, or damaged with TRUE replacement components.
• Verify that all adjustments are possible and carried out with ease. Make sure that
each adjustment pin inserts completely into each position without binding.
• Verify that safety catches and stops are in proper working order and engaged.
• Verify that the exercise is performed smoothly, free of noise, and/or binding.
• If equipped with a weight stack, verify that the proper weight selector pin is in place.
3. Check the function of your machine WEEKLY by verifying the following:
• Nuts, Bolts, and Fasteners: check tightness weekly. If any hardware has become
loose, retighten it, use Loctite
™
Threadlocker 242, or both.
• Frames and Lifting Arms: Inspect weekly for integrity and function. Replace any
component at first signs of wear. Use only TRUE supplied components.
4. Replace any warning label at the first sign of wear. Labels and the facility safety sign may be
obtained from TRUE.
B
B
O
O
L
L
T
T
L
L
E
E
N
N
G
G
T
T
H
H
M
M
E
E
A
A
S
S
U
U
R
R
I
I
N
N
G
G
G
G
U
U
I
I
D
D
E
E
SAFETY
FLAT HEAD SCREW
BUTTON HEAD SCREW
HEX HEAD SCREW
SOCKET HEAD SCREW
1
23
4
5
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 8 of 34
CHAPTER 1: SAFETY INSTRUCTIONS
Strength
Palladium Line
7
IIMMPPOORRTTAANNTT
Preventative maintenance is crucial to maintaining the function and safety of this equipment. Your
facility must establish written guidelines for preventative maintenance and keep written or online
records of the maintenance performed on these products. As a minimum, the items presented in
the SAFETY section of this document and the items that follow here, should be included in your
maintenance program.
1. Cables (If equipped): inspect end fittings daily for wear. Inspect the entire length of the
cable weekly. Replace cables at the first sign of wear and on an annual basis. If the cable
tension has been adjusted, be certain that the cable nut is tight.
2. Nuts, Bolts, and Fasteners: check tightness weekly. If any hardware has become loose,
retighten and/or use Loctite
TM
brand Threadlocker 242. Be sure all hardware is tight before
using the machine.
3. Safety Catches: inspect catches, stop rods and their associated fasteners weekly. Tighten
any loose hardware and replace any components at first signs of wear.
4. Frames: sweat, disinfecting sprays and spills can lead to corrosion which may lead to
premature failure of components. Wipe all machines down with a damp cloth and dry
completely each day. This includes painted parts, chrome parts and upholstered pads.
5. Painted and chrome plated parts: use Simple Green with a dilusion of 32:1 or similar
cleaner for light dirt and grime. Use Turtle Wax Polishing Compound or a good car polish to
remove heavier dirt and grease as well as for polishing. DO NOT use solvents, lacquer
thinner, acetone or finger nail polish remover. For scuffs and marks that are not removed
by the above methods use a soft scrub cleanser. Make sure all parts are dry upon
completion.
6. Weight stack enclosures (shrouds)(If Equipped): wipe down with a damp cloth as needed.
7. Exercise instruction labels: clean with soap and water as needed.
8. Guide rods (If equipped): wipe all dirt and dust from th
e guide rods before applying a light
application of Tri-Flow
TM
or other teflon spray lubricant. Spray the Tri-Flow
TM
on a rag and
then wipe the guide rods with the rag. DO NOT use oil lubricants such as WD-40. Caution: Tri-
Flow
TM
will stain carpet and clothing.
9. Bronze bushings: check monthly for signs of wear and replace as needed.
10. Linear Bearing Shafts: wipe any accumulation of dust or other contaminants from the
shafts on a weekly basis. Apply a thin layer of a Teflon
® (PTFE) grease on a weekly basis.
TRUE recommends Magnalube
® brand.
11. When replacing any component, use only TRUE supplied parts.
12. Be sure all hardware is tight before using the machine.
Retain these instructions for future reference.
If you have any questions, do not hesitate to contact your TRUE dealer or TRUE Fitness Technology
at (800)883-8783 or service@truefitness.com.
GENERAL CARE AND MAINTENANCE
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 9 of 34
CHAPTER 1: SAFETY INSTRUCTIONS
Strength
Palladium Line
DAILY WEEKLY MONTHLY 6 MONTHS ANNUALLY
INSPECT: Cables for wear, tension, and
proper connection if equipped.
X
INSPECT: All nuts and bolts and tighten if
needed.
X
INSPECT: All anti-slip surfaces and replace
as needed.
X
INSPECT: All adjustment pins, weight stack
pins, set screws, gas shocks, snap links, and
pulleys if equipped.
X
INSPECT: All accessory bars and handles. X
INSPECT: All safety and instructional
decals.
X
INSPECT: All weight stack shields if
equipped.
X
CLEAN: Guide rods and lubricate with a
teon lubricant if equipped.
X
CLEAN: Upholstery X
LUBRICATE: Pivot bearings and linear
bearings.
X
REPLACE: Cables if equipped. X
COMMERICAL MAINTENANCE SCHEDULE
COMPLIANCES:
is equipment complies with all tness product standards. For a complete list of compliances, please visit www.
TrueFitness.com.
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 10 of 34
CHAPTER 2: ASSEMBLY GUIDE
Strength
Palladium Line
Dimensions (mm) Dimensions (in)
SKU #
Machine
Description
Height Width Depth Height Width Depth
SPL-0100 Leg Extension 1478 1076.5 1363 58.2 42.4 53.7
SPL-0200 Seated Leg Curl 1478 1198 1496.98 58.2 47.2 58.9
SPL-0300 Leg Press 1707.75 1168.82 2227.7 67.2 46.0 87.7
SPL-0400
Inner/Outer
igh
1478 1793 1016 58.2 70.6 40.0
SPL-0500
Triceps
Extension
1478 1206 1341 58.2 47.5 52.8
SPL-0600 Biceps Curl 1478 1466 867 58.2 57.7 34.1
SPL-0700
Converging
Shoulder Press
1478 1524 1520 58.2 60.0 59.8
SPL-0800 Deltoid Raise 1478 1243 994 58.2 48.9 39.1
SPL-0900
Converging
Chest Press
1874 1404 1000 73.8 55.3 39.4
SPL-1000
Pec Fly/Rear
Delt
1972 1360 1487 77.6 53.5 58.5
SPL-1100
Diverging Lat
Pulldown
1906 1315 1221 75.0 51.8 48.1
SPL-1200
Diverging
Seated Row
1478 1130 1606 58.2 44.5 63.2
SPL-1300 Low Back 1478 1081 1405 58.2 42.6 55.3
SPL-1400 Abdominal 1567 1530 1206 61.7 60.2 47.5
SPL-1500 Rotar y Torso 1478 1104 1320 58.2 43.5 52.0
SPL-1600 Calf Press 1478 1157 1809 58.2 45.6 71.2
SPL-1700 Glute Press 1478 1049 1137 58.2 41.3 44.8
SPL-1800
Horizontial Leg
Curl
1478 1037 1621 58.2 40.8 63.8
SPL-2000 Hip rust 1534 1256 1573 60.4 49.4 61.9
MACHINE DIMENSIONS & WEIGHTS:
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 11 of 34
CHAPTER 2: ASSEMBLY GUIDE
Strength
Palladium Line
WEIGHT STACK CONFIGURATION:
Number of Weight Plates Number of Bumpers
Top Cap
Shroud SKU #s
Rep
Counter
SKU #
Machine
Description
Light
(L)
Standard
Heavy
(H)
Light
(L)
Standard
Heavy
(H)
Acrylic Steel
SPL-
0100
Leg Extension 12 16 20 6 4 2
SPL-00-
TPL100X
SPLSRDPS SPLSRDMS
SPLCTR
SPL-
0200
Seated Leg Curl 12 16 20 6 4 2
SPL-00-
TPL100X
SPLSRDPS SPLSRDMS
SPL-
0300
Leg Press N/A N/A 24 N/A N/A 2
SPL-03-
TPL100X
SPLSRDPT SPLSRDMT
SPL-
0400
Inner/Outer
igh
12 16 20 6 4 2
SPL-00-
TPL100X
SPLSRDPS SPLSRDMS
SPL-
0500
Triceps
Extension
12 16 20 6 4 2
SPL-05-
TPL100X
SPLSRDPS SPLSRDMS
SPL-
0600
Biceps Curl 12 16 20 6 4 2
SPL-00-
TPL100X
SPLSRDPS SPLSRDMS
SPL-
0700
Converging
Shoulder Press
12 16 20 6 4 2
SPL-00-
TPL100X
SPLSRDPS SPLSRDMS
SPL-
0800
Deltoid Raise 12 16 20 6 4 2
SPL-00-
TPL100X
SPLSRDPT SPLSRDMT
SPL-
0900
Converging
Chest Press
12 16 20 6 4 2
SPL-00-
TPL100X
SPLSRDPS SPLSRDMS
SPL-
1000
Pec Fly/Rear
Delt
12 16 20 6 4 2
SPL-00-
TPL100X
SPLSRDPS SPLSRDMS
SPL-
1100
Diverging Lat
Pulldown
12 16 20 6 4 2
SPL-00-
TPL100X
SPLSRDPT SPLSRDMT
SPL-
1200
Diverging
Seated Row
12 16 20 6 4 2
SPL-00-
TPL100X
SPLSRDPS SPLSRDMS
SPL-
1300
Low Back 12 16 20 6 4 2
SPL-00-
TPL100X
SPLSRDPT SPLSRDMT
SPL-
1400
Abdominal 12 16 20 6 4 2
SPL-00-
TPL100X
SPLSRDPT SPLSRDMT
SPL-
1500
Rot ar y Torso 12 16 20 6 4 2
SPL-00-
TPL100X
SPLSRDPT SPLSRDMT
SPL-
1600
Calf Press 12 16 20 6 4 2
SPL-00-
TPL100X
SPLSRDPT SPLSRDMT
SPL-
1700
Glute Press 12 16 20 6 4 2
SPL-00-
TPL100X
SPLSRDPT SPLSRDMT
SPL-
1800
Horizontial Leg
Curl
12 16 20 6 4 2
SPL-00-
TPL100X
SPLSRDPT SPLSRDMT
SPL-
1900
Weight Assisted
Chin Dip
12 16 20 6 4 2
SPL-00-
TPL100X
SPLSRDPT SPLSRDMT
SPL-
2000
Hip rust 12 16 20 6 4 2
SPL-00-
TPL100X
SPLSRDPS SPLSRDMS
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 12 of 34
CHAPTER 2: ASSEMBLY GUIDE
Strength
Palladium Line
REQUIRED TOOLS:
LABELS:
Flat Head Screwdriver
Open Ended wrench
Allen wrench:
• 3/32”
• 5/32”
• 3/16”
Rubber Mallet
Weight Stack Label
Part Number:
LBL-WS-SPL310
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 13 of 34
CHAPTER 2: ASSEMBLY GUIDE
Strength
Palladium Line
ASSEMBLY STEPS:
Step 1 (Top Cap Tray):
Remove the fully assembled machine from the pallet and place in the nal resting location.
Remove the Top Cap Tray from the Top Cap by removing the Top Cap Pad and Top Cap Tray Screws.
Note: Angle the Top Cap Tray as shown for proper removal.
CAUTION: All images are shown without the Mainframe attached to the Upright Assembly for illustration
clarity. Do not attempt to assemble the Front or Rear Shrouds without the Upright Assembly secured to the
Mainframe.
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 14 of 34
CHAPTER 2: ASSEMBLY GUIDE
Strength
Palladium Line
ASSEMBLY STEPS:
Step 2 (Top Cap):
Remove the Top Cap Screws from the Top Cap.
Carefully remove the Top Cap from the Upright Assembly so as not to damage the Top Cap that is tightly tted
to the Upright Assembly.
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 15 of 34
CHAPTER 2: ASSEMBLY GUIDE
Strength
Palladium Line
ASSEMBLY STEPS:
Step 3 (Guide Rods and Weight Stack Cable):
Remove the Guide Rod Bracket from the Upright Assembly by removing the Guide Rod Bracket screws.
Remove the Cable Bolt attached to the Weight Stack Cable from the Weight Stack Top Plate.
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 16 of 34
CHAPTER 2: ASSEMBLY GUIDE
Strength
Palladium Line
ASSEMBLY STEPS:
Step 4A (Weight Stack Conguration):
Angle the Guide Rods outward and then remove the Guide Rod Bracket and
Weight Stack Top Plate.
Referring to the Weight Stack Conguration table on pg. 11, place the
selected combination of Weight Stack Plates and Bumpers onto the Guide
Rods. Discard extra Bumpers.
Place the Weight Stack Top Plate and Guide Rod Bracket onto the Guide
Rods. Route the Weight Stack Cable through the Guide Rod Bracket and
secure the Cable Bolt to the Weight Stack Top Plate referring to Cable Tension
on pg. 31. Tighten the Cable Nut on the Weight Stack Top Plate. Using the
hardware from Step 3, secure the Guide Rod Bracket to the Upright Assembly.
Lubricate the Guide Rods per guidelines in Chapter 1: Safety Instructions.
Item Description
1 Guide Rod Bracket
2 Weight Stack Top Plate
3 Weight Stack Plate
4 Weight Stack Bumper
5 Weight Stack Cable
6 Cable Bolt
7 Cable Nut
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 17 of 34
CHAPTER 2: ASSEMBLY GUIDE
Strength
Palladium Line
ASSEMBLY STEPS:
Step 4B (Weight Stack Label):
To ensure a proper t to the weight plates, the weight stack label must be secured in two steps.
First, cut the top portion (10 lbs/4.5 kg.) from the weight stack label and secure that to the weight stack top plate.
Lastly, secure the remaining portion of the weight stack label to the weight stack starting with the top weight
plate located under the weight stack top plate.
Weight Stack Label
Part Number:
LBL-WS-SPL310
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 18 of 34
CHAPTER 2: ASSEMBLY GUIDE
Strength
Palladium Line
ASSEMBLY STEPS:
Step 5 (Front Acrylic Shrouds):
Insert the Front Shroud Bottom Retaining Caps into the designated slots on the Upright Assembly.
Note: e Front Shroud Bottom Retaining Caps are le (Part Number SPL-00-SHD014) and right (SPL-00-
SHD018) dependent.
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 19 of 34
CHAPTER 2: ASSEMBLY GUIDE
Strength
Palladium Line
ASSEMBLY STEPS:
Step 6 (Front Acrylic Shrouds):
Remove the protective wrapping from the Front Shrouds.
Slide the channels onto the Front Shroud as shown below in Detail J.
Slide the Front Shrouds onto the Front Shroud Bottom Retaining Caps. Note: Conrm the two dowels on the
Front Shroud Bottom Retaining Cap are inserted into the channels to secure the channels and shrouds in place.
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 20 of 34
CHAPTER 2: ASSEMBLY GUIDE
Strength
Palladium Line
ASSEMBLY STEPS:
Step 7 (Front Acrylic Shrouds):
Slide the Front Shroud Top Retaining Caps onto the Front Shrouds. Conrm the two dowles on each of the Front
Shroud Top Retaining Caps are inserted into the extrusions on the Upright Assembly as shown below.
Secure both Front Shroud Top Retaining Caps using the identied hardware already attached to the Upright
Assembly.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34

True Fitness Palladium Series Strength User manual

True Fitness
Brand
True Fitness
Model
Palladium Series Strength
Category
Fitness, gymnastics & weight training
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents