Philips DVP5900/37 User manual

Category
DVD players
Type
User manual

This manual is also suitable for

1
DVD VIDEO PLAYER
DVP3500
User manual
Thank you for choosing Philips.
Need help fast?
Read your Quick Use Guide and/or
Owner's Manual first for quick tips
that make using your Philips product
more enjoyable.
If you have read your instructions
and still need assistance,
you may access our online help at
www.usasupport.philips.com
or call
1-888-PHILIPS (744-5477)
while with your product.
Philips vous remercie de
votre confiance.
Besoin d'une aide
rapide?
Les Guide d'utilisation rapide et
Manuel de l'utilisateur regorgent
d'astuces destinées à simplifier
l'utilisation de votre produit Philips.
Toutefois, si vous ne parvenez
pas à résoudre votre problème,
vous pouvez accéder à
notre aide en ligne à l'adresse
www.usasupport.philips.com
ou formez le
1-800-661-6162 (Francophone)
1-888-PHILIPS (744-5477)
(English speaking)
Veillez
à avoir votre produit à
portée de main.
Gracias por escoger Philips
Necesita ayuda
inmediata?
Lea primero la Guía de uso rápido o el
Manual del usuario, en donde encontrará
consejos que le ayudarán a disfrutar
plenamente de su producto Philips.
Si después de leerlo aún necesita ayuda,
consulte nuestro servicio de
asistencia en línea en
www.usasupport.philips.com
o llame al teléfono
1-888-PHILIPS (744-5477)
y tenga a mano el producto.
DVP5900
01-41-DVP5900_US3 22/09/05, 2:07 PM1
2
Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so
don't miss out. Complete and return your Product Registration Card at once to ensure:
Return your Product Registration Card today
to get the very most from your purchase.
Know these
safety
symbols
*Proof of
Purchase
Returning the enclosed card
guarantees that your date of
purchase will be on file, so no
additional paperwork will be
required from you to obtain
warranty service.
*Product Safety
Notification
By registering your product,
you'll receive notification -
directly from the manufacturer -
in the rare case of a product
recall or safety defect.
*Additional
Benefits
of Product
Ownership
Registering your product guar-
antees that you'll receive all of
the privileges to which you're
entitled, including special
money-saving offers.
Visit our World Wide Web Site at http://www.usasupport.philips.com
Congratulations on your purchase,
and welcome to the family!
Dear PHILIPS product owner:
Thank you for your confidence in PHILIPS.You’ve
selected one of the best-built, best-backed products
available today.Well do everything in our power to
keep you happy with your purchase for many years to
come.
As a member of the PHILIPS family, youre entitled
to protection by one of the most comprehensive
warranties and outstanding service networks in the
industry.Whats more, your purchase guarantees
youll receive all the information and special offers for
which you qualify, plus easy access to accessories
from our convenient home shopping network.
Most importantly, you can count on our uncompro-
mising commitment to your total satisfaction.
All of this is our way of saying welcome - and thanks
for investing in a PHILIPS product.
P.S. To get the most from your PHILIPS
purchase, be sure to complete and return
your Product Registration Card at once.
For Customer Use
Enter below the Serial No. which is
located on the rear of the cabinet.
Retain this information for future
reference.
Model No. ____________________
Serial No. ____________________
This bolt of lightning indicates
uninsulated material within your
unit may cause an electrical shock. For
the safety of everyone in your household,
please do not remove product covering.
The exclamation point calls
attention to features for which
you should read the enclosed literature
closely to prevent operating and mainte-
nance problems.
WARNING: To reduce the risk of fire
or electric shock, this apparatus should
not be exposed to rain or moisture, and
objects filled with liquids, such as vases,
should not be placed on this apparatus.
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot,
fully insert.
ATTENTION: Pour éviter les choc
électriques, introduire la lame la plus large
de la fiche dans la borne correspondante
de la prise et pousser jusquau fond.
t
s
01-41-DVP5900_US3 22/09/05, 2:07 PM2
3
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near
water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation
openings. Install in accordance with
the manufacturer´s instructions.
8.
Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
9.
Do not defeat the
safety purpose of the
polarized or
grounding-type plug.
A polarized plug has two blades with one
wider than the other.A grounding type plug
has two blades and a third grounding prong.
The wide blade or the third prong are
provided for your safety. If the provided plug
does not t into your outlet, consult an
electrician for replacement of the obsolete
outlet.
10.
Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11.
Only use attachments/accessories
specied by the manufacturer.
12.
Use only with the cart, stand,
tripod, bracket, or table specied
by the manufacturer or sold with
the apparatus.When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
13 .
Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14 .
Refer all servicing to qualied service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
15.
Battery usage
CAUTION
To
prevent battery leakage which may result in
bodily injury, property damage, or damage
to the unit:
Install all batteries correctly, + and - as
marked on the unit.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
Remove batteries when the unit is not used
for a long time.
IMPORTANT SAFETY INSTRUCTIONS
AC Polarized
Plug
16.
Apparatus shall not be exposed to
dripping or splashing.
17.
Do not place any sources of danger
on the apparatus (e.g. liquid filled
objects, lighted candles).
18.
This product may contain lead and mercury.
Disposal of these materials may be regulated
due to environmental considerations.
For disposal or recycling information,
please contact your local authorities
or the Electronic Industries Alliance :
www.eiae.org.
EL 6475-E005: 04/01
01-41-DVP5900_US3 22/09/05, 2:07 PM3
4
Canada
English:
This digital apparatus does not exceed
the Class B limits for radio noise
emissions from digital apparatus as set
out in the Radio Interference
Regulations of the Canadian
Department of Communications.
Français:
Cet appareil numérique n'emet pas de
bruits radioélectriques dépassant les
limites applicables aux appareils
numériques de Class B prescrites dans
le Règlement sur le Brouillage
Radioélectrique édicté par le Ministère
des Communications du Canada.
CAUTION
:
INVISIBLE
LASER RADIATION
WHEN OPEN. DO NOT STARE INTO BEAM.
DANGER
:
INVISIBLE LASER RADIATION WHEN OPEN.
AVOID DIRECT EXPOSURE TO BEAM.
VARO!
AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET
ALTTIINANAKYMATTOMAALLE LASERSATEILYLLE. ALA
KATSO SATEESEEN.
VARNING!
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD.
OCH SPARREN AR URKOPPLAD. BETRAKTA EJ STRÅLEN.
DANGER - Invisible laser radiation when open.
AVOID DIRECT EXPOSURE TO BEAM.
or
This warning label is located on the
rear panel and inside this laser
product.
WARNING
To reduce the risk of fire or electric shock,
do not expose this appliance to rain or
moisture.
Use of controls or adjustments or
performance of procedures other than
herein may result in hazardous radiation
exposure.
The set complies with the FCC-Rules, Part
15 and with 21 CFR 1040.10.
The apparatus shall not be exposed to dripping
or splashing and that no objects filled with
liquids, such as vases, shall be placed on
apparatus.
Class II equipment symbol
This symbol indicates that the unit has
a double insulation system
01-41-DVP5900_US3 22/09/05, 2:07 PM4
5
CONSUMERS SHOULD NOTE THAT NOT
ALL HIGH DEFINITION TELEVISION SETS
ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS
TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE
CONNECTION TO THE STANDARD
DEFINITION OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 525p
AND 625p DVD PLAYER, PLEASE CONTACT
OUR CUSTOMER SERVICE CENTER.
Due to the inconsistency of disc formats
provided by various disc manufacturers, your
DVD system may require a playability
enhancement or upgrade. As DVD technology
advances, these enhancements will become
common and will be easy to complete.
Go to www.philips.com/support for
software upgrade.
ATTENTION
L'utilisation des commandes ou
réglages ou le non-respect des
procédures ci-incluses peuvent se
traduire par une exposition
dangereuse à l'irradiation.
ATENCIÓN
El uso de mando o ajustes o la
ejecucción de métodos que no sean
los aquí descritos puede ocasionar
peligro de exposición a radiación.
Important Note:
Due to the numerous versions of new
CD-Audio copy protection or
enhanced CD-Audio protection
recently available on certain discs,
Philips is unable to guarantee that
this DVD Player is fully compatible
with such new discs. Should you have
difficulty playing any such CD-Audio
discs, kindly refer them to your CD-
Audio disc retailer.
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro-Logic” and the
double-D symbol are trademarks of
Dolby Laboratories.
Manufactured under license from Digital
Theater Systems, Inc. U.S. Pat. Nois.
5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 and
other U.S. and world-wide patents issued
and pending. "DTS" and "DTS Digital
Surround" are registered trademarks
of Digital Theater Systems, Inc.
All Right Reserved.
This product incorporates copyright
protection technology that is protected by
method claims of certain U.S. patents and
other intellectual property rights owned by
Macrovision Corporation and other rights
owners. Use of this copyright protection
technology must be authorized by
Macrovision Corporation, and is intended
for home and other limited viewing uses
only unless otherwise authorized by
Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
01-41-DVP5900_US3 22/09/05, 2:07 PM5
6
General Information
CAUTION
(WARNING LOCATION: ON THE
BACKPLATE OF THE SET)
NEVER MAKE OR CHANGE
CONNECTIONS WITH THE
POWER SWITCHED ON.
Laser safety
This unit employs a laser. Due to possible
eye injury, only a qualified service person
should remove the cover or attempt to
service this device.
NOTE:
PICTURES SHOWN MAYBE
DIFFERENT BETWEEN
COUNTRIES.
LASER
Type Semiconductor laser
GaAlAs
Wave length 650 nm (DVD)
780 nm (VCD/CD)
Output Power 7 mW (DVD)
10 mW (VCD/CD)
Beam divergence 60 degree
For Customer Use:
Read carefully the information located at
the bottom of your DVD VIDEO player
and enter below the Serial No. Retain this
information for future reference.
Model No. DVP5900
Serial No. _______________
Environmental Information
All unnecessary packaging has been
omitted. The packaging has been made
easy to separate into three materials:
cardboard (box), polystyrene foam
(buffer) and polyethylene (bags, protective
foam sheet).
Your DVD player consists of materials
which can be recycled and reused if
disassembled by a specialised company.
Please observe the local regulations
regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
DivX, DivX Certified, and
associated logos are
trademarks of
DivXNetworks, Inc and
are used under license.
Important Note:
Due to the numerous versions of new
CD-Audio copy protection or
enhanced CD-Audio protection
recently available on certain discs.
Should you have difficulty playing
any such CD-Audio discs, kindly refer
them to your CD-Audio disc retailer.
01-41-DVP5900_US3 22/09/05, 2:07 PM6
7
Index
English ----------------------------------------- 6
Français-------------------------------------- 42
Español -------------------------------------- 78
English
Españo l Fran
çais
01-41-DVP5900_US3 22/09/05, 2:07 PM7
8
English
Contents
Introduction
Supplied accessories ................................. 10
Cleaning discs............................................. 10
Setup ............................................................ 10
Connections
Connecting TV ..................................... 11-12
Using Composite Video jacks (CVBS) ..
11
Using Component Video jacks
(Y Pb Pr).................................................
11
Using an accessory RF modulator.... 12
Connecting the power cord ................... 13
Optional: Connecting to a HDMI
compatible device ..................................... 14
Using HDMI (High Definition
Multimedia Interface) sockets ...........
14
Optional : Connecting to an Audio
System ......................................................... 15
Stereo system has Dolby Pro Logic or
Right / Left Audio In jack ....................
15
Optional: Connecting Digital AV Receiver
....................................................................... 15
Receiver has a PCM, Dolby Digital, or
MPEG2 decoder ...................................
15
Functional Overview
Front and Rear Panels .............................. 16
Remote Control ........................................ 17
Getting Started
Step 1: Inserting batteries into the
Remote Control ........................................ 18
Using the Remote Control to operate
the Player ...............................................
18
Step 2: Setting up the TV ................... 18-20
Setting up Progressive Scan feature (for
Progressive Scan TV only) ..................
19
Selecting the color system that
corresponds to your TV ..................... 20
Step 3: Setting language preference....... 21
Setting the OSD Language ................. 21
Setting the Audio, Subtitle and DVD
menu language ...................................... 21
Disc Operations
Playable Discs ............................................. 22
Region Codes............................................. 22
Playing discs ................................................ 23
Using Disc Menu ....................................... 23
Basic playback controls ...................... 24-25
Pausing playback ...................................
24
Selecting track/chapter ....................... 24
Resuming playback from the last
stopped point ........................................ 24
Zoom ...................................................... 24
Repeat ..................................................... 24
Repeat A-B ............................................. 24
Slow Motion .......................................... 25
Forward / Reverse Searching............. 25
Preview ................................................... 25
Special DVD features ............................... 26
Selecting a Title ..................................... 26
Camera Angle ........................................ 26
Changing the Audio Language ........... 26
Subtitles .................................................. 26
Playing a DivX disc .................................... 26
Playing MP3/JPEG Picture CD ................ 27
General Operation ..............................
27
Playback selection ................................ 27
Repeat ..................................................... 27
Zoom picture ........................................ 27
Preview ................................................... 27
01-41-DVP5900_US3 22/09/05, 2:07 PM8
English
9
Contents
DVD Menu Options
Language ...................................................... 28
OSD Language ...................................... 28
Audio, Subtitle, DVD Menu ................
28
Setting the DivX Subtitle font ........... 28
Video Setup .......................................... 29-31
TV Display ............................................. 29
TV Type ................................................... 29
Progressive - turning on/off ............... 30
HD JPEG Mode .................................... 31
HDMI Output ....................................... 31
Audio Setup .......................................... 32-33
Digital Output ....................................... 32
LPCM Output ....................................... 33
Night Mode - turning on/off .............. 33
Rating ..................................................... 34-36
Changing the Password....................... 34
Setting the Rating ................................. 35
Restoring to original settings ............ 36
DivX registration ................................. 36
Specifications ...................................... 37
Troubleshooting ......................... 3839
Glossary ......................................................................40
01-41-DVP5900_US3 22/09/05, 2:07 PM9
10
English
Cleaning discs
To clean a disc, use a micro fibre cleaning
cloth and wipe the disc from the center
to the edge in a straight line.
CAUTION!
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or anti-static sprays intended for discs.
Since the optical unit (laser) of the DVD
system operates at a higher power than
regular DVD or CD players, cleaning CDs
intended for DVD or CD players may
damage the optical unit (laser). Therefore,
refrain from using a cleaning CD.
General Information
Setup
Finding a suitable location
Place the set on a flat, hard and stable
surface. Do not place the set on a carpet.
Do not position the set on top of
other equipment that might heat it up
(e.g., receiver or amplifier).
Do not put anything under the set
(e.g., CDs, magazines).
Install this system near the AC outlet
and where the AC power plug can be
reached easily.
Space for ventilation
Place the apparatus in a location with
adequate ventilation to prevent internal
heat build up. Allow at least 10 cm (4.5)
clearance from the rear and the top of
the set and 5cm (2.3) from the left and
right to prevent overheating.
10cm (4.5")
10cm (4.5")
5cm (2.3")
5cm (2.3")
Avoid high temperatures, moisture,
water and dust
Apparatus shall not be exposed to
dripping or splashing.
Do not place any sources of danger on
the apparatus (e.g., liquid filled objects,
lighted candles).
Supplied accessories
Remote Control
and
two AA batteries
PREVIEW
PREVIEW
MUTE
MUTE
Composite video
cable (yellow)
Audio cable
(white, red)
01-41-DVP5900_US3 22/09/05, 2:07 PM10
English
11
Connections
Connecting TV
DIGITAL
COAXIAL
OUT
CVBS
VIDEO OUT
YCr/Pr
Cb/Pb
HDMI
AUDIO
OUT
AUDIO
IN
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
AUDIO
OUT
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
2
1
DIGITAL
COAXIAL
OUT
CVBS
VIDEO OUT
YCr/Pr
Cb/Pb
HDMI
AUDIO
OUT
AUDIO
IN
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
AUDIO
OUT
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
2
1
IMPORTANT!
You only need to make one
video connection from the following
options, depending on the
capabilities of your TV system.
Connect the DVD system
directly to the TV.
Using Composite Video jacks
(CVBS)
1 Use the composite video cable (yellow)
to connect the DVD Players CVBS
(VIDEO) jack to the video input jack (or
labeled as A/V In, Video In, Composite or
Baseband) on the TV (cable supplied).
2 To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
IMPORTANT!
The progressive scan video
quality is only possible when using Y
Pb Pr and a progressive scan TV is
required.
Using Component Video jacks
(Y Pb Pr)
1 Use the component video cables (red/
blue/green) to connect the DVD systems
Y Pb Pr jacks to the corresponding
Component video input jacks (or labeled
as Y Pb Pr) on the TV (cable not supplied).
2 To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
3 Proceed to page 19 for detailed
Progressive Scan set up.
01-41-DVP5900_US3 22/09/05, 2:07 PM11
12
English
Connections
IMPORTANT!
If your TV only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the
DVD playback on the TV. See your
electronics retailer for details on RF
modulator availability and
operations.
Using an accessory RF modulator
1 Use the composite video cable (yellow)
to connect the DVD Players CVBS jack
to the video input jack on the RF
modulator.
2 Use the RF coaxial cable (not supplied)
to connect the RF modulator to your
TVs RF jack.
DIGITAL
COAXIAL
OUT
CVBS
VIDEO OUT
YCr/Pr
Cb/Pb
HDMI
AUDIO
OUT
AUDIO IN
R L
VIDEO
IN
TO TVINT IN
CH3 CH4
2
1
RF coaxial cable to TV
Back of RF Modulator
(example only)
Antenna or
Cable TV signal
01-41-DVP5900_US3 22/09/05, 2:08 PM12
English
13
Connections
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
When no disc is loaded, press
STANDBY ON on the DVD Player
front panel,
NO DISC may appear on the
display panel.
IR
Connecting the power cord
NO DISC
DIGITAL
COAXIAL
OUT
CVBS
VIDEO OU
T
Cr/Pr
C
HDMI
AUDIO
OUT
~ AC MAINS
AUDIO
OUT
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
01-41-DVP5900_US3 22/09/05, 2:08 PM13
14
English
Using HDMI (High Definition
Multimedia Interface) sockets
HDMI connects untouched and
uncompressed digital transmission for the
highest and cripest sound/image quality.
It has plug and play capability using only
one cable for both audio/video output.
Use a HDMI cable (not supplied) to
connect the HDMI OUT on the DVD
Player to HDMI IN on an HDMI
compatible device (eg.; PC, DVD Player,
Set Top Box).
It may take a while for the DVD
player and input device to communicate
and initialise.
Playback starts automatically.
The HDMI is backward compatible with
some DVI devices using an appropriate
adaptor plug.
If a DVI device is connected, an
additional audio cable will be needed for
audio transmission.
This DVD player supports HDCP
compliance devices only.
Optional: Connecting to a
HDMI compatible device
Connections
HDMI compatible
device
To enjoy optimum multi-channel
surround sound
DIGITAL
COAXIAL
OUT
CVBS
VIDEO OUT
YCr/Pr
Cb/Pb
HDMI
AUDIO
OUT
VIDEO
AUDIO
OUT IN
HDMI VIDEO AUDIO
HDMI IN
To enjoy optimum multi-channel
surround sound without HDMI-
compatible television
DIGITAL
COAXIAL
OUT
CVBS
VIDEO OUT
YCr/Pr
Cb/Pb
HDMI
AUDIO
OUT
VIDEO
AUDIO
OUT IN
HDMI VIDEO AUDIO
1
TV
Most older DVI enable devices are not
HDCP compliant and playback is not
possible.
A pop-up menu will appear on the TV
screen.
Helpful hint:
– HDCP (High-bandwidth Digital Content
Protection) is a specification that provides a
secure transmission of digital contents
between different devices (to prevent
unauthorised copy-right).
HDMI
compatible
TV
HDMI
compatible
amplifier
HDMI
compatible
amplifier
DIGITAL
COAXIAL
OUT
CVBS
VIDEO OUT
YCr/Pr
Cb/Pb
HDMI
AUDIO
OUT
VIDEO
AUDIO
OUT IN
HDMI IN
01-41-DVP5900_US3 22/09/05, 2:08 PM14
English
15
Connections
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
1 Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2 Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
Optional: Connecting to an
Audio System
Optional: Connecting Digital
AV Receiver
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1 Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2 Connect the COAXIAL jack of the DVD
Player to the corresponding Digital Audio
In jack on your Receiver (cable not
supplied).
3 Set the DVD Players Digital Output to
PCM or ALL depending on the
capabilities of your Receiver (see page 33
“Digital Output”).
Helpful Hint:
If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
DIGITAL
COAXIAL
OUT
CVBS
VIDEO OUT
YCr/Pr
Cb/Pb
HDMI
AUDIO
OUT
AUDIO
IN
STEREO
DIGITAL
DIGITAL
COAXIAL
OUT
CVBS
VIDEO OUT
YCr/Pr
Cb/Pb
HDMI
AUDIO
OUT
AUDIO
IN
DIGITAL
AV Receiver
01-41-DVP5900_US3 22/09/05, 2:08 PM15
16
English
Functional Overview
Front and Rear Panels
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
IR
9 STOP
To stop playback
T NEXT
To search or select next chapter or track
2; PLAY/PAUSE
To start or interrupt playback
PREV S
To search or select previous chapter or
track
Video Upscaling and Progressive
Scan LED
Led ON in Video Upscaling or Progressive
Scan mode
STANDBY-ON B
To switch the DVD Player to Standby
mode or ON
Disc tray
OPEN/CLOSE /
Open/Close the disc tray
Display
Shows the current status of the DVD
Player
IR Sensor
Point the remote control towards this
sensor
YPbPr
Connect to YPbPr input of a TV
CVBS (VIDEO Out)
Connect to CVBS Video input of a TV
HDMI
Connect to an HDMI -compatible device
(example; LCD/Projector/Plasma/
Projection TV, HDTV or receiver)
DIGITAL
COAXIAL
OUT
CVBS
VIDEO OUT
YCr/Pr
Cb/Pb
HDMI
AUDIO
OUT
Mains (AC Power Cord)
Connect to a standard AC outlet
Digital Coaxial Out
Connect to coaxial AUDIO input of a
digital audio equipment
Audio Out (Left/Right)
Connect to AUDIO inputs of an amplifier,
receiver or stereo system
01-41-DVP5900_US3 22/09/05, 2:08 PM16
English
17
Functional Overview
Remote Control
PREVIEW MUTE
RETURN/TITLE
To go back to previous menu/ show
title menu
DISC MENU
Enters or exits the disc contents
menu
Switches on or off the playback
control mode (for VCD version
2.0 only)
1 2 3 4
Selects an item in the menu/
fast forward/backward, slow forward/
backward
OK
Acknowledge menu selection
S
To search or select previous
chapter or track
STOP ( 9 )
To stop playback
PLAY ( B )
To start playback
PAUSE ( ; )
To pause playback temporarily /
frame-by-frame playback
REPEAT
Selects various repeat modes
REPEAT (A-B)
Repeats playback a specific section
on a disc
PREVIEW
To preview the content of a track
or whole disc
MUTE
Disables or enables sound output
POWER B
To switch the DVD player to
standby mode or ON
0-9 numerical key pad
Selects numbered items in a
menu
DISPLAY
Displays information on TV
screen during playback
SYSTEM MENU
Access or exit DVD Players
system menu
T
To search or select next chapter
or track
SUBTITLE
To access subtitle language
system menu
ANGLE
Selects a DVD camera angle
ZOOM
Enlarge a picture on the TV
screen
AUDIO
To access audio language system
menu
01-41-DVP5900_US3 22/09/05, 2:08 PM17
18
English
Getting Started
Step 1: Inserting batteries
into the Remote Control
1
3
2
1 Open the battery compartment.
2 Insert two batteries type R06 or AA,
following the indications (+-) inside
the compartment.
3 Close the cover.
Using the Remote Control to
operate the Player
1 Aim the Remote Control
directly at the remote
sensor (iR) on the front
panel.
2 Do not put any objects
between the Remote
Control and the DVD
Player while operating the
DVD Player.
CAUTION!
Remove batteries if they are
exhausted or if the Remote Control
is not being used for a long time.
Do not use old and new or
different types of batteries in
combination.
Batteries contain chemical
substances, so they should be
disposed properly.
Step 2: Setting up the TV
IMPORTANT!
Make sure you have completed all
the necessary connections. (See
page 11-12 Connecting TV).
1 Turn on the TV and set to the correct
video-in channel. You should see the
DVD background screen on the TV.
2 Usually these channels are between the
lowest and highest channels and may be
called FRONT, A/V IN, or VIDEO. See
your TV manual for more details.
Or, you may go to channel 1 on your
TV, then press the Channel down button
repeatedly until you see the Video In
channel.
Or, the TV Remote Control may have a
button or switch that chooses different
video modes.
Or, set the TV to channel 3 or 4 if you
are using an RF modulator.
3 If you are using external equipment, (eg.
audio system or receiver), turn it on and
select the appropriate input source for
the DVD Player output. Refer to the
equipment owners manual for detail.
IR
PREVIEW MUTE
01-41-DVP5900_US3 22/09/05, 2:08 PM18
English
19
Setting up Progressive Scan feature
(for Progressive Scan TV only)
The progressive scan display twice the
number of frames per seconds than
interlaced scanning (ordinary normal TV
system). With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
IMPORTANT!
Before enabling the progressive scan
feature, you must ensure:
1) Your TV can accept progressive signals,
a progressive scan TV is required.
2) You have connected the DVD player to
your TV using Y Pb Pr (see page 11.)
1 Turn on your TV.
2 Turn off your TV progressive scan mode
or turn on interlaced mode (refer to
your TV user manual.)
3 Press POWER on the remote control to
turn on the DVD player.
4 Select the correct Video Input channel.
(See page 18).
The DVD background screen appears
on the TV.
5 Press SYSTEM MENU.
6 Press 2 to select {Video}, then press OK
to confirm.
TV Display
TV Type
Video Output
Progressive
HD JPEG Mode
HDMI Output
Language Audio Track RatingVideo
4:3 LETTERBOX
MULTI
YPbPr
Off
HD JPEG
Auto
Off
On
7 Select {Video Output} to {YPbPr}, then
press OK to confirm.
8 Select {Progressive} to {On}, then OK to
confirm.
The below menu will appear on the TV.
1. ENSURE YOUR TV HAS PROGRESSIVE SCAN.
2. CONNECT USING YPBPR (GBR) VIDEO CABLE.
3. IF THERE IS DISTORTED PICTURE
Cancel
OK
ACTIVATING PROGRESSIVE SCAN:
WAIT 15 SECONDS FOR AUTO RECOVERY.
9 Press 1 to highlight
OK
in the menu
and press OK to confirm.
There will be a distorted picture on
your TV at this state until you turn
on the progressive scan mode on
your TV.
0 Turn on your TV progressive scan mode
(refer to your TV user manual.)
The below menu appears on the TV.
CONFIRM AGAIN TO USE PROGRESSIVE
SCAN. IF THE PICTURE IS GOOD,
PRESS OK BUTTON ON REMOTE.
Cancel
OK
! Press 1 to highlight
OK
in the menu
and press OK to confirm.
The set up is complete now and you
can start enjoy the high quality picture.
If no picture:
Wait for 15 seconds for auto recovery.
OR
1 Press OPEN CLOSE 0 on the DVD
system to open the disc tray.
2 Press 2 followed by AUDIO the remote
control.
The DVD background screen will
appear on the TV.
Helpful Hint:
There are some progressive scan TV and
High-Definition TV sets that are not fully
compatible with this DVD system, resulting in
the unnatural picture when playing back a
DVD VIDEO disc in the progressive scan
mode. In such a case, turn off the
progressive scan feature on both the DVD
system and your TV set.
Getting Started
TIPS: To return to the previous menu, press OK.
To remove the menu, press SYSTEM MENU.
01-41-DVP5900_US3 22/09/05, 2:08 PM19
20
English
Getting Started
TIPS:
To return to the previous menu, press OK.
To remove the menu, press SYSTEM MENU.
Selecting the colour system that
corresponds to your TV
This DVD Player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this Player, the colour system of
the Disc, the TV and the DVD Player
should match.
TV Display
TV Type
Video Output
Progressive
HD JPEG Mode
HDMI Output
Language Audio Track RatingVideo
4:3 LETTERBOX
MULTI
YPbPr
Off
HD JPEG
Auto
NTSC
PAL
MULTI
1 Press SYSTEM MENU.
2 Press 2 repeatedly to select {Video}, then
press OK.
3 Press 3 4 to select {TV Type}.
4 Enter its submenu by pressing OK.
5 Press 3 4 to highlight one of the options
below:
PAL Select this if the connected TV is
PAL system. It will change the video signal
of a NTSC disc and output in PAL format.
NTSC Select this if the connected TV
is NTSC system. It will change the video
signal of a PAL disc (VCD only) and
output in NTSC format.
MULTI Select this if the connected TV
is compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
6 Select an item and press OK.
Follow the instructions show on the
TV to confirm the selection (if any).
Helpful Hints:
Before changing the current TV
Type setting, ensure that your TV
supports the selected TV Type
system.
If there is no proper picture on
your TV, wait for 15 seconds for auto
recovery.
Language Audio Track RatingVideo
CHANGING PAL TO MULTI
1. ENSURE THAT YOUR TV SYSTEM SUPPORTS
MULTI MODE
2. IF THERE IS A DISTORTED PICTURE DISPLAYED
ON THE TV, WAIT 15 SECONDS FOR AUTO
RECOVER
OK Cancel
To reset to default TV colour
system:
Wait for 15 seconds for auto recovery.
OR
1 Press OPEN CLOSE 0 on the DVD
system to open the disc tray.
2 Press 2 followed by SUBTITLE the
remote control.
The DVD background screen will
appear on the TV.
01-41-DVP5900_US3 22/09/05, 2:08 PM20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41

Philips DVP5900/37 User manual

Category
DVD players
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI