Philips DVP5996K/96 Quick start guide
- Category
- LCD TVs
- Type
- Quick start guide
This manual is also suitable for
DVP5996K
DVD Video Player
Quick Start Guide
What’s in the box?
DVD Video Player
Remote Control
and 2 AAA batteries
User
Manual
Composite
Audio/Video Cables
Basic Audio/Video Connections
VIDEO IN
(CVBS)
Audio and Video
Power
HDMI IN
VIDEO IN
(CVBS)
V (Pr/Cr)
U (Pb/Cb)
Y
COMPONENT
VIDEO IN
OR
Component Video
(Better Quality)
HDMI
(Best Quality)
OR
Composite Video CVBS
(Good Quality)
(Cable not supplied)
VIDEO IN
(CVBS)
TV (back)
Video
Power
Audio
DVD Player (back)
TV (back)
Audio and Video
Power
(Cable not supplied)
DVD Player (back)
TV (back)
DVD Player (back)
1
Connect
Power Cable (for Asia Pacic only)
dvp5996k_96_98_qsg_eng.indd 1 2008-02-27 10:16:01 AM
3
Enjoy
2
Set up
A
Finding the viewing channel
A Press
1
on this unit to turn it on.
B Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT,
°
button) until
you see the Video In channel.
B
Select the display language on the
screen
A Press SETUP.
The { General Setup Page } appears.
Disc Lock
OSD Language Auto (ENG)
Sleep ENGLISH
Lip Sync
Volume
Auto Standby
DivX(R) VOD Code
General Setup Page
Melayu
B Use keys to select { OSD Language } and press
.
C Use keys to select a language and press OK to
confirm. (For Philips ‘EasyLink’ TV, { Auto } must be
selected.)
D Press SETUP to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this unit, not
for the DVD disc menu.
There are various setup options (Audio Setup, Video Setup,
Preference) available on this unit. Refer to the user manual
for more information.
A
Start disc playback
A Playback may start automatically when a disc has
been loaded in the disc tray.
Note If a disc menu appears on the TV, use
keys to navigate in the DVD menu.
B Press
u
to start playback.
C To stop playback, press
n
.
Troubleshooting
For more troubleshooting tips,
see the user manual.
No power
• Check if the AC power cord is properly connected.
• Press 1 on the front panel of this unit to turn on the
power.
No picture
• Check connection to TV and ensure the plugs are
rmly in place.
No sound or distorted sound
• Check audio connections and make sure that the
connected audio device is turned on.
• For HDMI connection, check if your TVs HDMI or
Digital setting is set to ON. Contact your TV
manufacturer for detailed information.
Remote control does not work
• Check the batteries are loaded correctly or replace
the batteries with new ones.
• Reduce the distance between the remote control
and this unit.
• Point the remote control directly toward the IR
sensor.
Need help?
User Manual
See the user manual that came with your Philips DVD Player.
Online
Register your product and get support at www.philips.com/welcome.
2008 © Koninklijke Philips N.V.
All rights reserved.
www.philips.com
sgptt-0809/96_98_03
dvp5996k_96_98_qsg_eng.indd 2 2008-02-27 10:16:03 AM
-
1
-
2
Philips DVP5996K/96 Quick start guide
- Category
- LCD TVs
- Type
- Quick start guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI