Steren USB-537 Owner's manual

Page is loading ...

3

Thank You

on purchasing your new Steren product.

This manual includes all the feature operations

and troubleshooting necessary to install and

operate your new 7-ports USB hub. Please

review this manual thoroughly to ensure proper

installation and operation of this product. For

support, shopping, and everything new at

Steren, visit our website:

www.steren.com

USB-537

7-ports USB hub

4

IMPORTANT

-Clean only with a soft, dry cloth.

-Do not try to open the equipment, may

cause malfunction and warranty will be void.

System Requirements

1. Microsoft windows 98 or later.

2. Your PC must have a principal USB

con¬troller within the system.

5

Highlights

The 7 port USB hub has a sliding cover to

protect the USB ports and on / off switch.

It is compatible with USB Ver. 2.0 and Ver.

1.1. It is hot swap, so you don’t need to

restart computer after installation, perfect to

connect up to 7 devices to one port in the

computer.

It includes power converter, allowing to

connect high power consumption devices

to the hub or more hubs in cascade without

data loss.

6

Installation

This product does not require drivers to

use it.

1.- Plug the A-type connector into an

available USB port in the computer.

2.- Move the cover protector to connect USB

devices.

3.- To turn on, move the on/off button to (I).

7

4.- Plug the devices (cameras, keyboard,

mouse, USB Memory, ipod/iphone, etc.) that

you want to use into the hi-speed HUB.

5.- The hi-speed HUB automatically will be

detected by the computer, including the plugged

devices into it.

Note: If you connect many HUBs into

daisy-chain, the adaptor (included) must be

connected to the rst one that is not functioning.

8

There are two different ways to power up the

hi-speed hub.

The rst one is through the USB port from

the computer. When you connect the

hi-speed hub to an available USB port

automatically will be powered by the USB

port with 5V- - - and 500mA.

The second one is through a power adaptor

(included). Use the included power adapter.

Note: If you connect many HUBs

into daisy-chain, you must power

adapter(included) in the rs onet.

Power supply

9

Specications

Troubleshooting

Problem Solution

My PC does not

detect the hub.

-Check that is well

connected.

-Plug into another

USB port.

Input:5V- - - 500mA (x USB)

5V- - - 2A (with power converter)

Power converter

Input: 100-240 V~ 50-60Hz 12Wmax

Output: 5V- - - 2A

Product design and specications are

subject to change without previous notice.

10

WARRANTY

This Steren product is warranted under normal usage against

defects in workmanship and materials to the original purchaser

for one year from the date of purchase.

CONDITIONS

1.- This warranty card with all the required information, invoice,

product box or package, and product, must be presented when

warranty service is required.

2.- If the product stills on the warranty time, the company will

repair it free of charge.

3.- The repairing time will not exceed 30 natural days, from the

day the claim was received.

4.- Steren sell parts, components, consumables and acces-

sories to customer, as well as warranty service, at any of the

addresses mentioned later.

THIS WARRANTY IS VOID IN THE NEXT CASES:

If the product has been damaged by an accident, acts of God,

mishandling, leaky batteries, failure to follow enclosed instruc-

tions, improper repair by unauthorized personnel, improper safe

keeping, among others.

a) The consumer can also claim the warranty service in the

purchase establishment.

b) If you lose the warranty card, we can reissue it, if you show

the invoice or purchase ticket.

Product: 7-ports USB hub

Part number: USB-537

Brand: Steren

Page is loading ...

Steren USB-537 Owner's manual

Steren USB-537 Owner's manual

in other languages

Related papers

Other documents