Page is loading ...
3
Thank You
on purchasing your new Steren product.
This manual includes all the feature operations
and troubleshooting necessary to install and
operate your new 7-ports USB hub. Please
review this manual thoroughly to ensure proper
installation and operation of this product. For
support, shopping, and everything new at
Steren, visit our website:
www.steren.com
USB-537
7-ports USB hub
4
IMPORTANT
-Clean only with a soft, dry cloth.
-Do not try to open the equipment, may
cause malfunction and warranty will be void.
System Requirements
1. Microsoft windows 98 or later.
2. Your PC must have a principal USB
con¬troller within the system.
5
Highlights
The 7 port USB hub has a sliding cover to
protect the USB ports and on / off switch.
It is compatible with USB Ver. 2.0 and Ver.
1.1. It is hot swap, so you don’t need to
restart computer after installation, perfect to
connect up to 7 devices to one port in the
computer.
It includes power converter, allowing to
connect high power consumption devices
to the hub or more hubs in cascade without
data loss.
6
Installation
This product does not require drivers to
use it.
1.- Plug the A-type connector into an
available USB port in the computer.
2.- Move the cover protector to connect USB
devices.
3.- To turn on, move the on/off button to (I).
7
4.- Plug the devices (cameras, keyboard,
mouse, USB Memory, ipod/iphone, etc.) that
you want to use into the hi-speed HUB.
5.- The hi-speed HUB automatically will be
detected by the computer, including the plugged
devices into it.
Note: If you connect many HUBs into
daisy-chain, the adaptor (included) must be
connected to the rst one that is not functioning.
8
There are two different ways to power up the
hi-speed hub.
The rst one is through the USB port from
the computer. When you connect the
hi-speed hub to an available USB port
automatically will be powered by the USB
port with 5V- - - and 500mA.
The second one is through a power adaptor
(included). Use the included power adapter.
Note: If you connect many HUBs
into daisy-chain, you must power
adapter(included) in the rs onet.
Power supply
9
Specications
Troubleshooting
Problem Solution
My PC does not
detect the hub.
-Check that is well
connected.
-Plug into another
USB port.
Input:5V- - - 500mA (x USB)
5V- - - 2A (with power converter)
Power converter
Input: 100-240 V~ 50-60Hz 12Wmax
Output: 5V- - - 2A
Product design and specications are
subject to change without previous notice.
10
WARRANTY
This Steren product is warranted under normal usage against
defects in workmanship and materials to the original purchaser
for one year from the date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice,
product box or package, and product, must be presented when
warranty service is required.
2.- If the product stills on the warranty time, the company will
repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the
day the claim was received.
4.- Steren sell parts, components, consumables and acces-
sories to customer, as well as warranty service, at any of the
addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God,
mishandling, leaky batteries, failure to follow enclosed instruc-
tions, improper repair by unauthorized personnel, improper safe
keeping, among others.
a) The consumer can also claim the warranty service in the
purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show
the invoice or purchase ticket.
Product: 7-ports USB hub
Part number: USB-537
Brand: Steren
/