2. Zip-Rip
  3. ZR1RD
ZR1RD

Zip-Rip ZR1RD Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Zip-Rip ZR1RD Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Tape Measure
STEP 2
Rotate the Clamp around
and over the end
of the Tape
Measure
to align
the hole
in the
Base Component
with the hole in the
bottom of the Clamp.
Insert second screw
through the bottom
of the Base Component.
Tighten both screws firmly.
Tape Measure
STEP 1
1A. Insert one screw
up through the
bottom of the
Base Component
and into the Clamp.
Tighten slightly.
1B. Place the end of the Tape Measure
into the slot of the Base Component.
Zip
★
Rip Tape Measure Attachment
Assembly Instructions
Base Component Top Clamp Two (2) Screws
Parts List
Warranty Information
Thirty (30) day money back guarantee.
/