LG HS6 (LAS650M) Owner's manual

ENGLISH

Model : MUSICFLOWHS6

SMART Hi-Fi AUDIO

Wireless Multi-room Sound Bar

Please read this manual carefully before

operating your speaker and retain it for future

reference.

ENGLISH | OWNER’S MANUAL

1 Getting Started

Getting Started2

Getting Started

1

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral

triangle is intended to alert the

user to the presence of uninsulated

dangerous voltage within the

product’s enclosure that may be of sucient

magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature accompanying the

product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products

around this product. (ex. Electrical swatter) This

product may malfunction due to electrical shock.

CAUTION: The apparatus should not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, should be placed on the

apparatus.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over heating. The

openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

NOTICE: For safety marking information including

product identication and supply ratings, please

refer to the main label on the bottom or the other

surface of the product.

For models using an adapter

Only use the AC adapter supplied with this device.

Do not use a power supply from another device or

another manufacturer. Using any other power cable

or power supply may cause damage to the device

and void your warranty.

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In

case of an emergency, the Power Plug must remain

readily accessible.

Check the specication page of this owner’s

manual to be certain of the current requirements.

Do not overload wall outlets. Overloaded wall

outlets, loose or damaged wall outlets, extension

cords, frayed power cords, or damaged or cracked

wire insulation are dangerous. Any of these

conditions could result in electric shock or re.

Periodically examine the cord of your device, and if

its appearance indicates damage or deterioration,

unplug it, discontinue use of the device, and have

the cord replaced with an exact replacement part

by an authorized service center. Protect the power

cord from physical or mechanical abuse, such as

being twisted, kinked, pinched, closed in a door,

or walked upon. Pay particular attention to plugs,

wall outlets, and the point where the cord exits the

device.

Getting Started 3

Getting Started

1

This device is equipped with a portable battery or

accumulator.

Safety way to remove the battery from the

equipment: Remove the old battery or battery

pack, follow the steps in reverse order than

the assembly. To prevent contamination of the

environment and bring on possible threat to

human and animal health, the old battery or

the battery put it in the appropriate container

at designated collection points. Do not dispose

of batteries or battery together with other

waste. It is recommended that you use local,

free reimbursement systems batteries and

accumulators. The battery should not be exposed

to excessive heat such as sunshine, re or the like.

Table of Contents4

Table of Contents

1 Getting Started

2 Safety Information

6 Main Features

6 Introduction

7 Accessories

8 Front panel

8 Rear panel

9 Remote control

10 Installing the sound bar

10 Mounting the main unit on a wall

2 Connecting

12 Connecting the AC Adapter

12 Wireless subwoofer connection

14 Connecting to your TV

14 – Using an OPTICAL cable

14 – LG Sound Sync

15 – Using an HDMI cable

16 – Enjoy rich sound broadcast of the

channel with the sound bar

16 – What is SIMPLINK?

17 – ARC (Audio Return Channel) function

17 – Additional information for HDMI

18 Optional equipment connection

18 – HDMI connection

19 – PORT. (Portable) IN connection

19 – OPTICAL IN connection

20 Initial Multi-Room Setup

20 – Wired connection (MUSICflow Mesh

Network Connection)

20 – Wireless connection (Standard

Wireless Connection)

20 Installing “Music Flow Player” App

21 – Starting with Music Flow Player app

22 Connecting the speaker to your Home

Network

22 – Simple Connection (EZ Setup)

23 – Connecting the speaker to your

network with a LAN cable

25 – Connecting the speaker to your

Network via the Wi-Fi Setup Method

(Android)

28 – Connecting the speaker to your

Network via the Wi-Fi Setup Method

(iOS)

31 Connecting the speakers to your Home

Network (Additional)

31 – Connecting the additional speaker to

your network with a LAN cable

33 – Connecting the additional speaker

to your network via the Wi-Fi Setup

Method

35 Using the Bridge

35 – Use as a root device (wired to the

home router)

37 – Use as a wireless extender

38 Using Media Server for PC

38 – Music Flow PC Software for windows

39 – Nero MediaHome 4 Essentials for

Mac OS

3 Operating

41 Enjoying the Music with Music Flow Player

app

41 – Overview of Home menu

42 – Overview of the side menu

43 – Playing a song

44 – Overview of Playback

46 Different ways of listening to music

46 – Group Playback

47 – Surround Sound Mode (Home

Cinema Mode)

49 – Seamless playback

50 Setting the Speaker with Music Flow

Player app

50 – Overview of setting menu

50 – [General] Menu

51 – [Speakers] Menu

52 – [Alarms/Sleep Timer] Menu

52 – [Account management] Menu

52 – [Time Zone] Menu

53 – [Advanced Settings] Menu

55 – [Chromecast] Menu

55 – [Version Info.] Menu

55 – [Open source licenses] Menu

56 Using a Bluetooth Wireless Technology

56 – About Bluetooth

Table of Contents 5

1

2

3

4

5

56 – Bluetooth profiles

56 – Listening to Music of a Bluetooth

Device

57 – NFC for Easy Pairing

(Android Only)

58 Other operations

58 – DRC (Dynamic Range Control)

58 – AV Sync

58 – Using your TV remote control

58 – Turn off the sound temporarily

58 – Displaying input source information

58 – Sleep timer setting

59 – Auto power down

59 – AUTO POWER On/Off

60 Sound adjustment

60 – Adjust volume level automatically

60 – Adjust the Treble/Bass/Sub-woofer

60 Standby mode

60 – Standby mode

60 – Network standby mode

61 – Bluetooth standby mode

61 Reset the Speaker

61 – Resetting the speaker

4 Troubleshooting

62 Troubleshooting

62 – General

63 – Network

64 – Application and PC Software

5 Appendix

65 File requirement

65 Trademarks and licenses

66 Specifications

68 Handling the Speaker

68 Important Information Relating to

Network Services

69 TERMS OF USE

Some of the content in this manual may dier from Music Flow Player app depending on the

application’s version.

Getting Started6

Getting Started

1

Main Features

Made for iPod/iPhone/iPad or

Android device

Enjoys music from iPod/iPhone/iPad or Android

device with simple connection.

LG Sound Sync

Controls volume level of this unit by the remote

control of your LG TV that is compatible with LG

Sound Sync.

Portable In

Listens to music from your portable device.

Music Flow Player application

Listens to music stored on your smart device.

You can control this speaker with your iPod touch/

iPhone/iPad or Android device via Music Flow

Player app. This speaker and your smart device

must be connected to the same network. Visit

Apple “App Store” or Google “Play Store” or use the

QR code shown below to search for “Music Flow

Player” app. For detailed information, refer to page

20.

(Apple iOS)

(Android OS)

y

Depending on the application’s version and the

settings of smart device, Music Flow Player app

may not be operated normally.

y

Some smart devices may not be compatible with

this speaker.

Introduction

Symbol used in this manual

,

Note

Indicates special notes and operating features.

>

Caution

Indicates cautions for preventing possible damages

from abuse.

Getting Started 7

Getting Started

1

Accessories

Please check and identify the supplied accessories.

Designs and specications of the accessories are

subject to change without prior notice.

Remote control (1) Batteries (2)

AC adapter (1) Power cord (1)

Wall bracket (2) Wall bracket install

guide (1)

Screws (2) Cable ties for arranging

cables (2)

LG Tag On sticker (1) LAN cable

Optical

LG Tag On sticker

1. Remove the battery cover on the rear of the

remote control.

2. Attach the supplied LG Tag On sticker on the

remote control. See the image below.

Refer to the pages 57 for how to use.

Getting Started8

Getting Started

1

A

Display window

B

Remote sensor

LED indicator

Shows connection status.

C

(Add)

Adds the speaker to your network. (page 31)

D

(Wi-Fi)

Connects your speaker to your network. (page

25)

E

F (Function)

Selects the function and input source.

F

p/o

(Volume)

Adjusts volume level.

G

1/!

(Standby/On)

- Power On

- Switching to the standby mode (page 60)

Front panel

A

DC IN (AC adapter input)

B

S/W download connector (For service only)

C

HDMI IN / OUT : HDMI input / output

D

ETHERNET : LAN port

E

PORTABLE IN : Portable input

F

OPT. IN : Optical input

Rear panel

Getting Started 9

Getting Started

1

Remote control

Replacement of Battery

Remove the battery cover on the rear of the

Remote Control, and insert two R03 (size AAA)

batteries with and matched correctly.

• • • • • • • • • •

a

• • • • • • • • •

1

(Power) : Switches the unit ON or OFF. / Switches

to the standby mode.

FUNC : Selects the function and the input source.

(Mute) : Mutes the sound.

OPTICAL : Changes input source to OPTICAL

directly.

SOUND EFFECT : Selects a sound eect mode.

WOOFER LEVEL : Sets the sound level of woofer.

VOL

o

/

p

: Adjusts speaker volume.

• • • • • • • • • •

b

• • • • • • • • •

REPEAT : Listen to your music repeatedly.

C/V

(Skip) : Skips Fast backward or Forward.

dM

(Play/Pause) : Starts playback. / Pauses

playback.

(Shue) : Shues the music on the list.

You can use these playback buttons after

play music by “Music Flow Player” App or PC

software.

,

Note

• • • • • • • • • •

c

• • • • • • • • •

DRC : Turns on or o DRC function.

INFO : Displays the input source information.

AV SYNC : Synchronizes the audio and video.

SLEEP : Sets the system to turn o automatically at

a specied time.

AUTO VOL : Turns on or o the AUTO VOLUME

mode.

AUTO POWER : Turns on or o AUTO POWER

function. (Refer to the page 59.)

Getting Started10

Getting Started

1

Installing the sound

bar

You can hear the sound by connecting the unit to

the other device : TV, Blu-ray disc player, DVD player,

etc.

Place the unit in front of the TV and connect it to

the device you want. (Refer to pp. 14 - 19.)

You can place the wireless subwoofer anywhere in

your room. But it is better to place the subwoofer

near the main unit. Turn it slightly toward the center

of the room to reduce the wall reections.

y

For best performance of wireless connection

such as Bluetooth or wireless subwoofer,

do not install the unit on Metallic furniture

because wireless connection communicates

through a module positioned on the

bottom of the unit.

y

Be careful not to make scratches on the

surface of the Unit /Sub-Woofer when

installing or moving them.

>

Caution

Mounting the main

unit on a wall

You can mount the main unit on a wall.

Because it is dicult to make a connection

after installing this unit, you should connect

the cables before installation.

>

Caution

Preparation materials

Unit

Wall bracket install guide

Screws

Screws (A)

Wall plug

Wall bracket

(Not supplied)

Getting Started 11

Getting Started

1

1. Match the TV’s BOTTOM EDGE of Wall bracket

install guide with the bottom of TV and attach

to the position.

TV

2. When you mount it on a wall (concrete), use the

wall plugs. You should drill some holes. A guide

sheet (Wall bracket install guide) is supplied to

drill. Use the sheet to check the point to drill.

3. Remove the Wall bracket install guide.

4. Fix the brackets with screws (A) as shown in the

illustration below.

Screws (A) and Wall Plugs are not supplied for

mounting the unit. We recommend the Hilti

(HUD-1 6 x 30) for the mounting.

,

Note

5. Put the unit on the brackets to match screw

holes on the bottom of the unit.

6. Fix the unit with the screws firmly.

To detach the unit, perform it in reverse order.

,

Note

y

Do not install this unit upside down. It can

damage the parts of this unit or be the

cause of personal injury.

y

Do not hang onto the installed unit and

avoid any impact to the unit.

y

Secure the unit rmly to the wall so that it

does not fall o. If the unit falls o, it may

result in an injury or damage to the product.

y

When the unit is installed on a wall, please

make sure that a child does not pull any of

connecting cables, as it may cause it to fall.

>

Caution

2 Connecting

Connecting12

Connecting

2

Connecting the AC

Adapter

Connect the speaker to the power supply with the

supplied AC adapter.

1. Connect the supplied AC power cord to the AC

adapter.

2. Connect the AC adapter cable to DC. IN adapter

input.

3. Plug the AC power cord into an AC outlet.

Only use the AC adapter supplied with this

device. Do not use a power supply from

another device or manufacturer. Using any

other power cable or power supply may cause

damage to the device and void your warranty.

>

Caution

Wireless subwoofer

connection

LED indicator of wireless subwoofer

LED Color Status

Green

(Blink)

The connection is trying.

Green The connection is completed.

Red The wireless subwoofer is

in standby mode or the

connection is failed.

O (No

display)

The power cord of wireless

subwoofer is disconnected.

Setting up the wireless subwoofer

for the first time

1. Connect the power cord of the wireless

subwoofer to the outlet.

2. Turn on the main unit : The main unit and

wireless subwoofer will be automatically

connected.

Manually pairing wireless subwoofer

When your connection is not completed, you can

see the red LED or the blinking of green LED on

the wireless subwoofer and the subwoofer does

not make sound. To solve the problem, follow the

below steps.

1. Adjust volume level of the main unit to

minimum.

-

”VOL MIN” appears on the display window.

2. Press and hold (Mute) on the remote control

for about 3 seconds.

-

“WL RESET” appears on the display window

briey.

Connecting 13

Connecting

2

3. If the LED of the wireless subwoofer already

blinks in green continually, you can skip this

step.

Press and hold PAIRING on the back of the

wireless subwoofer for more than 5 seconds.

-

The LED of the wireless subwoofer lights up

alternately in red and green.

4. Disconnect the power cord of the main unit

and the wireless subwoofer.

5. Connect them again after the LED of the main

unit and the wireless subwoofer is fully turned

off.

The main unit and the wireless subwoofer will

be paired automatically when you turn on the

main unit.

-

When the connection is completed, you can

see the green LED on the subwoofer.

y

It takes a few seconds (and may take longer)

for the main unit and the subwoofer to

communicate with each other and make

sounds.

y

The closer the main unit and the subwoofer,

the better sound quality. It is recommended

to install the main unit and the subwoofer

as close as possible and avoid the cases

below.

-

There is a obstacle between the main

unit and the subwoofer.

-

There is a device using same frequency

with this wireless connection such as a

medical equipment, a microwave or a

wireless LAN device.

,

Note

Connecting14

Connecting

2

Connecting to your TV

Please connect with this unit and TV using the

optical digital cable or HDMI cable considering the

state of the TV.

Using an OPTICAL cable

1. Connect the OPT. IN jack on the back of the

unit to OPTICAL OUT jack on the TV using an

OPTICAL cable.

Optical cable

2. Set the input source to OPTICAL. Press

repeatedly FUNC on the remote control or

F on the unit until the function is selected.

To directly select the OPTICAL function, press

OPTICAL on the remote control.

y

You can enjoy the TV audio through the

speakers of this unit. In the case of some

TV models, you must select the external

speaker option from the TV menu. (For

details, reference your TV user manual.)

y

Set up the sound output of TV to listen to

the sound through this unit :

TV setting menu

[

[Sound]

[

[TV Sound

output]

[

[External speaker (Optical)]

y

Details of TV setting menu vary depending

on the manufacturers or models of your TV.

,

Note

LG Sound Sync

You can control some functions of this unit by

your TV’s remote control with LG Sound Sync. It is

compatible with the LG TV that is supported LG

Sound Sync. Make sure of the LG Sound Sync logo

on your TV.

Controllable function by LG TV’s remote control :

Volume up/down, mute

Refer to the TV’s instruction manual for the details

of LG Sound Sync.

Make one of the following connections, depending

on the capabilities of your equipment.

y

You can also use the remote control of

this unit while using LG Sound Sync. If you

use TV's remote control again, the unit

synchronizes with the TV.

y

When the connection fails, make sure of the

condition of the TV and power.

y

Make sure of the condition of this unit and

the connection in the cases below when

using LG Sound Sync.

-

Turn o the unit.

-

Changing the function to the others.

-

Disconnecting the optical cable.

y

The amount of time to turn o this unit is

dierent depending on your TV when you

set AUTO POWER function to ON.

,

Note

Connecting 15

Connecting

2

With wired connection

1. Connect your LG TV to the unit by using an

optical cable.

Optical cable

2. Set up the sound output of TV to listen to the

sound through this unit :

TV setting menu

[

[Sound]

[

[TV Sound

output]

[

[LG Sound Sync (Optical)]

3. Turn on the unit by pressing

1

(Power) on the

remote control.

4. Select OPTICAL function by using FUNC on

the remote control or F on the unit until the

function is selected.

You can see “LG OPT” on the display window

if connecting normally between this unit and

your TV.

Details of TV setting menu vary depending on

the manufacturers or models of your TV.

,

Note

Using an HDMI cable

If you connect this unit to a TV that supports HDMI

CEC and ARC (Audio Return Channel), you can

enjoy the TV audio through the speakers of this unit

without connecting the optical cable.

Connect the HDMI OUT jack on the back of the unit

to ARC jack on the TV using an HDMI cable.

HDMI cable

y

HDMI CEC (Consumer Electronics Control):

Using a single remote control, you have the

ability to operate CEC compatible devices

(TV, Sound Bar, Blue-ray player, etc.)

y

You can also enjoy extra functions such as

Bluetooth with FUNC on remote control

or F on this unit. When you go back to live

TV channel after using the extra functions

(Bluetooth) of this audio system, you should

choose your preferred speaker on TV to

enjoy the sound from this audio system

again.

,

Note

Connecting16

Connecting

2

HDMI cable Checklist

Some HDMI cables do not support the ARC

function, this can result in no sound output.

When connecting this unit to the TV, if there is no

sound, there might be a problem with the HDMI

cable. Therefore connect this unit to the TV and

check whether the Type A, High speed HDMI™

Cable with Ethernet.

STANDARD HDMI CABLE WITH ETHERNET

HIGH SPEED HDMI CABLE

HIGH SPEED HDMI CABLE WITH ETHERNET

(X)

(O)

Enjoy rich sound broadcast of

the channel with the sound

bar

Connection through HDMI Cable

Your television must support the newest HDMI

features (HDMI CEC

1)

/ ARC (Audio Return Channel))

to fully enjoy the Live broadcasting channel with

audio system through an HDMI cable. Unless your

TV supports these HDMI features, the audio system

should be connected through an OPTICAL cable.

1) HDMI CEC (High-Denition Multimedia Interface

Consumer Electronics Control)

Consumer Electronics Control (CEC) is an HDMI

feature designed to allow the user to command

and control the CEC-enabled devices, that are

connected through HDMI by using only one of

their remote controls.

※

Trade names for CEC are SimpLink (LG) , Anynet+

(Samsung), BRAVIA Sync (Sony), EasyLink (Philips),

etc.

What is SIMPLINK?

Some functions of this unit are controlled by the

TV’s remote control when this unit and LG TV’s with

SIMPLINK are connected through HDMI connection.

Controllable functions by LG TV’s remote control :

Power on/o, volume up/down, etc.

Refer to the TV owner’s manual for the details of

SIMPLINK function.

LG TV’s with SIMPLINK function has the logo as

shown above.

y

Depending on the state of the unit, some

SIMPLINK operation may dier from your

purpose or not work.

y

Depending on a TV or a player which

is connected with this unit, SIMPLINK

operation may dier from your purpose.

,

Note

Connecting 17

Connecting

2

ARC (Audio Return Channel)

function

The ARC function enables an HDMI capable TV to

send the audio stream to HDMI OUT of the unit.

To use this function :

-

Your TV must support the HDMI-CEC and ARC

function and the HDMI-CEC and ARC must be

set to On.

-

The setting method of HDMI-CEC and ARC may

dier depending on the TV. For details about

ARC function, refer to your TV manual.

-

You must use the HDMI cable (Type A, High

Speed HDMI™ cable with Ethernet).

-

You must connect the HDMI OUT on the unit

with HDMI IN of the TV that supports ARC

function using an HDMI cable.

-

You can connect only one Sound bar to TV

compatible with ARC.

y

ARC function is automatically selected when

ARC signal comes in from TV, no matter

what kind of the function you are using.

y

You can enjoy the TV audio through the

speakers of this unit. In the case of some

TV models, you must select the external

speaker option from the TV menu. (For

details, reference your TV user manual.)

y

Set up the sound output of TV to listen to

the sound through this unit :

TV setting menu

[

[Sound]

[

[TV Sound

output]

[

[External speaker (HDMI ARC)]

y

Details of TV setting menu vary depending

on the manufacturers or models of your TV.

,

Note

Additional information for

HDMI

y

When you connect an HDMI or DVI compatible

device make sure of the following:

- Try switching off the HDMI/DVI device and this

player. Next, switch on the HDMI/DVI device

and leave it for around 30 seconds, then switch

on this player.

- The connected device’s video input is set

correctly for this unit.

- The connected device is compatible with

720 x 576p, 1280 x 720p, 1920 x 1080i or

1920 x 1080p video input.

y

Not all HDCP-compatible HDMI or DVI devices

will work with this player.

- The picture will not be displayed properly with

non-HDCP device.

y

If a connected HDMI device does not accept

the audio output of the player, the HDMI

device’s audio sound may be distorted or

may not output.

y

Changing the resolution when the

connection has already been established

may result in malfunctions. To solve the

problem, turn o the player and then turn it

on again.

y

When the HDMI connection with HDCP

is not veried, TV screen is changed to

black screen. In this case, check the HDMI

connection, or disconnect the HDMI cable.

y

If there are noises or lines on the screen,

please check the HDMI cable (length is

generally limited to 4.5 m(15 ft).

y

You cannot change the video resolution

in the HDMI IN mode. Change the video

resolution of the connected component.

y

If the video output signal is abnormal when

your personal computer is connected to

HDMI IN jack, change the resolution of your

personal computer to 576p, 720p, 1080i or

1080p.

,

Note

Connecting18

Connecting

2

Optional equipment

connection

HDMI connection

For enjoying sound only

You can enjoy the sound from the external device

you connect.

To the Blu-ray disc player,

DVD player, etc.

1. Connect HDMI IN jack on the back of the unit to

HDMI OUT jack on the audio device such as Blu-

ray disc player, DVD player, etc.

2. Set the input source to HDMI IN. Press

repeatedly FUNC on the remote control or F on

the unit until the function is selected.

For enjoying both sound and picture

You can enjoy both sound and picture from the

external device you connect.

1. Connect HDMI IN jack on the back of the unit to

HDMI OUT jack on the external device such as

Blu-ray disc player, DVD player, etc.

2. Connect HDMI OUT jack on the back of the unit

to HDMI IN jack on the TV.

3. Set the input source to HDMI IN. Press

repeatedly FUNC on the remote control or F on

the unit until the function is selected.

HDMI OUT jack is for TV connection. Even

though PCM multi channel is inputted to the

unit through an HDMI cable, the unit can only

output 2 channel to TV.

,

Note

Connecting 19

Connecting

2

PORT. (Portable) IN

connection

Listening to music from your

portable player

The unit can be used to play the music from many

types of portable players or external devices.

1. Connect the portable player to the PORTABLE

IN connector of the unit.

2. Turn the power on by pressing

1

(Power).

3. Select the PORTABLE function by pressing

FUNC on the remote control or F on the unit

until the function is selected.

4. Turn on the portable player or external device

and start playing it.

OPTICAL IN connection

Connect an optical output jack of external devices

to the OPT. IN jack.

Optical cable

1. Connect the OPT. IN jack on the back of the unit

to optical out jack of your TV (or digital device

etc.)

2. Select the input source to OPTICAL by pressing

FUNC on the remote control or F on the unit

until the function is selected.

To directly select the OPTICAL function, press

OPTICAL on the remote control.

3. Listen to sound from the connected device.

4. Press OPTICAL to exit from OPTICAL.

Function is retuned to previous one.

Connecting20

Connecting

2

Initial Multi-Room

Setup

When installing the MUSICow product for the rst

time, you can choose two types of connection as

below.

Wired connection (MUSICflow

Mesh Network Connection)

Connect your speaker to the home router using

LAN cable.

Then you can connect the additional MUSICow

products (Optional) to your home network

wirelessly. Refer to “Connecting the speakers to

your Home Network (Additional)” on page 31.

LAN Cable

Wireless connection (Standard

Wireless Connection)

When the wired connection is unavailable between

your speaker and home router, this unit oers

music streaming service within home router’s Wi-Fi

coverage.

Connect one of the your speaker to the home

router wirelessly.

Then you can connect the additional MUSICow

products (Optional) to your home network

wirelessly. Refer to “Connecting the speakers to

your Home Network (Additional)” on page 31.

Wireless signal

Installing “Music Flow

Player” App

Through Apple “App Store” or

Google “Play Store”

1. Tap the Apple “App Store” icon or Google “Play

Store” icon.

2. Type in “Music Flow Player” in the search bar and

tap “Search”.

3. Select “Music Flow Player” in the search result list

to download.

y

Music Flow Player app will be available in

version of the software as follow;

Android OS : Ver 4.0 (ICS) (or later)

iOS O/S : Ver 6.0 (or later)

y

Depending on the device, “Music Flow

Player” app may not work.

,

Note

Through QR code

Install “Music Flow Player” app through QR code.

Scan the QR code using the scanning application.

(Apple iOS)

(Android OS)

Page is loading ...

LG HS6 (LAS650M) Owner's manual

This manual is also suitable for

LG HS6 (LAS650M) Owner's manual

Other documents