Revolabs 01-USBAUD35-KIT User manual

IN

RevolabsFLXUSBAudioConnectorKit

01‐USBAUD35‐KIT

ToconnecttheRevolabsFLXtoyourcomputerusetheRevolabsFLXUSBAudioConnectorKit(01‐USBAUD35‐KIT).

PlugtheStereosideofthecablesintotheUSBaudiodongle,andthemonosideintotheFLXBaseStaon.Ensurethatthe

HeadsetoutputoftheDongleisconnectedtotheINportoftheFLXBaseStaon,andtheMicropho

neinputofthedongle

totheOUTportoftheFLXBaseStaon.

Onceyouconnectthedongletoyourcomputer,theoperangsystemshouldautomacallydetectthedongleasanaudio

device,andloadtherequireddrivers.Nosowareshouldneedtobeinstalledonthecomputer.

OntheFLXDial

ergotoMenu—Setup—AdvancedSetup—AdvancedAudio—AuxAudioandensurethatAuxOutissetto

LINE.BothAuxInandAuxOuthavetobesettoONinthismenufortheaudiotowork.