Champion P-5 Specification

P-5
Champion
Brand
Champion
Model
P-5
Type
Specification

This manual is also suitable for

Project
Item No.
Quantity
(1M) 2/05 Printed in U.S.A.
CH053
5 Hp - 30" Pulper
Waste Handling System
P5-30
P5-30 PULPER
STANDARD FEATURES
• Flatware saver
• Flushing valve to pump-motor seal
• Flexible draw latches on hood
assembly
• Remote mounted control box with
overload indicator lights and circuit
breaker
• Removable, gasketless water
extractor door
• Start/stop switch mounted on
extractor
• Stainless steel tubular bulletfeet
legs 1-1/2" total adjustment
• Total stainless steel construction
Water level control
SPECIFIER STATEMENT
Specied unit will be Champion model P5-30 pulper waste
handling system.
Features include: 5 hp with 30" diameter slurry chamber,
atware saver, three stationary blocks with four cutting
surfaces each, two tool steel rotating shearing blades, large
water extractor chamber with removable gasketless door
and external drain handle. Contructed of Type 304 SST.
1 year parts and labor warranty.
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 800/532-8591 Fax: 336/661-1979
www.championindustries.com
Champion Industries, Inc.
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 800/263-5798 Fax: 905/562-4618
OPTIONS & ACCESSORIES
Recirculating pump
Multiple trough congurations
Extractor ushing system
Spray Reel - 30ft. unmounted
Automatic shutdown timer
Deodorizer injector
Remote mounted start-stop station (unmounted)
Multiple trough congurations (9" & 12")
5 Hp - 30" Pulper
Waste Handling System
P5-30 PULPER
Dimensions shown in inches
Volume crated: 99 cu. ft.
Shipping weight crated: 1000 lbs.
57-3/4"
15-1/8" 18-1/4" 12 - 1/16"12-1/4"
18-3/4"
33"
25-15/16"
18-13/16"
38-1/16"
60-5/16"
A
2
4
5HP
B
3
5-3/4"
1-15/16"
F
D
C
E
2HP
G
20-9/16"
10"
32-3/8"
16-5/16"
19-1/8"
36-7/8"
20-7/8"
11-3/16"
3
2HP
11"
6-1/4"
4
2
3/4HP
3/4HP Recirculating Pump
Top View
Front View
Top View
P5-30 with Optional Recirculating Pump
Mounted on Rear of Water Extractor
Utilities
1 Electrical (see chart)
2 Optional Recirculation Pump
3 Drain
1-1/2" NPT
4 Cold water
1/2" NPT cold water connection
Item Qty. Description
A 1 Slurry Chamber 30" dia.
B 1 Motor-Main Drive 5 Hp
C 1 Water Extractor Drive Motor 2 Hp
D 1 Water Extractor
E 1 Discharge Chute
F 1 Scrapping Tray
G 1 Start/Stop Station
SPECIFICATIONS
Capacities Input
Waste (approx. lbs. per hr.) 700
Motor horsepower
Pulper 5
Water Extractor 2
Slurry Chamber
Tank (in. dia.) 30
Cutting Disk (in. dia.) 12
Connections
Fresh water (in.) 1/2
Drain (in.) 1-1/2
19-11/16"
20-9/16"
3/4HP Recirculating Pump
19-1/8"
16-5/16"
10"
32-3/8"
11"
2
3/4HP
11-3/16"
2HP
36-7/8"
20-7/8"
6-1/4"
4
3
38-1/16"
57-3/4"
12-1/16"
5-3/4"
1 -13/16"
15-1/8" 18-1/4" 12-1/4"
23-1/4"
33"
25-15/16"
60-5/16"
A
4
2
3
5HP
B
1-15/16"
3/4HP
D
C
F
2HP
G
E
5 Hp - 30" Pulper
Waste Handling System
P5-30 PULPER
24"
FLOORLINE
8"1
48"
16"
Front View
9"
8"
4"
Front
View
Front View
Top View
Side View
P5-30 with Optional
Recirculating Pump
Mounted on Front of
Water Extractor
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 800/532-8591 • Fax: 336/661-1979 • www.championindustries.com
P5-30 w/ 3/4 Hp Recirculating Pump
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs. Amps Ampacity Device
208/60/3 31 40 40
240/60/3 29 40 40
480/60/3 15 20 20
P5-30 w/o Recirculating Pump
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs. Amps Ampacity Device
208/60/3 27 35 35
240/60/3 26 35 35
480/60/3 13 20 20
5 Hp - 30" Pulper
Waste Handling System
P5-30
P5-30 PULPER
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 800/532-8591 • Fax: 336/661-1979 • www.championindustries.com
Trough Feed #1
Trough Feed #4
Trough Feed #2
Trough Feed #3
Trough Feed #6
Trough Feed #5
Top View
Feed Tray w/Hood
Front View
Under Table Feed Tray
Top View
3"
5HP
12"
33"
2HP
2HP
Front View
12"
5HP
33"
2HP
2HP
30-1/4"
32-1/8"
15-1/8"
13-1/8"
18-1/2"
26-1/4"
26-1/4"
30-1/4"
18-1/2"
47-1/4"
Trough Feed #1
Trough Feed #4
Trough Feed #2
Trough Feed #3
Trough Feed #6
Trough Feed #5
Top View
Feed Tray w/Hood
Front View
Under Table Feed Tray
Top View
3"
5HP
12"
33"
2HP
2HP
Front View
12"
5HP
33"
2HP
2HP
30-1/4"
32-1/8"
15-1/8"
13-1/8"
18-1/2"
26-1/4"
26-1/4"
30-1/4"
18-1/2"
47-1/4"
Sample Trough Configurations and Feed Methods
For additional trough configurations and
feed methods, contact Factory.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Champion P-5 Specification

P-5
Champion
Brand
Champion
Model
P-5
Type
Specification
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents