Charleston Solar Path Light
First Use
The Try Me switch can be used to help match the LED color to the lantern color, afterwards it can be
disconnected and discarded. Although there may be some charge left in the battery we recommend fully
charging it before first use. Leave the switch in the off position for 2 sunny days to ensure the battery is
fully charged. Once fully charged switch to ON and the lights will automatically illuminate when it gets dark.
First Use
Although there may be some initial charge in the battery we recommend fully
charging it before first use. Leave the switch (inside lens) in the off position for 2
sunny days to ensure the battery is fully charged. Once fully charged turn switch
to on position. The light will now automatically illuminate when it gets dark. You
can cover the light or place in a dark room to test that the light is operating.
Switch off for 1 to 2 sunny days to allow the maximum charge to the battery. If after this boost charge your
battery still does not perform to expectations you should replace it. All our batteries are covered by a 1
year warranty. To change the battery first remove the top by turning it and lifting off. Remove the 3 screws
on the underside of the top to remove the battery cover. Remove the existing battery and replace with a
new one. Only use Ni-MH or Ni-Cd rechargeable batteries. Please ensure that the battery is disposed of
according to local regulations.
Position
ü
Assembly
ü
û
û
To assemble your Charleston Path Lights simply push the post and ground stake on
as shown.
Position the light to receive the maximum
amount of sunlight. Do not position where
the solar panel will be shaded.
Do not position under bright
light as this will prevent the
light switching on at night.
Battery
Rechargeable batteries become less efficient with repeated charge-discharge
cycles and the battery capacity reduces. If you find that the battery appears to be
less efficient or does not run for long we suggest you first try to boost charge it.
x3
ON OFF
-
1
Smart Solar 3426WRM6-HC Operating instructions
- Type
- Operating instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Smart Solar 3732WR30 Operating instructions
-
-
-
-
-
-
-
-
-
Sharper Image 22" Solar Powered Candle Lantern User manual
Other documents
-
Kenroy Home 60525RED Installation guide
-
-
-
Toro Solar Path Light User manual
-
eLEDing EE814WX-BP User manual
-
Brinkmann SL-7 Owner's manual
-
none 50029SS Installation guide
-
SMA SRC-1 Technical Description
-
-