Smart Solar 3426WRM6-AB Installation guide

Type
Installation guide

Smart Solar 3426WRM6-AB is a solar-powered light that automatically illuminates at night. It is designed to be positioned in an area with maximum sunlight exposure, and it can be used for a variety of purposes, such as illuminating pathways, driveways, or gardens. The light features a rechargeable battery that is charged by the solar panel during the day, and it has an on/off switch that allows you to manually control the light. The light also has a sensor that automatically turns it on at night and off during the day.

Smart Solar 3426WRM6-AB is a solar-powered light that automatically illuminates at night. It is designed to be positioned in an area with maximum sunlight exposure, and it can be used for a variety of purposes, such as illuminating pathways, driveways, or gardens. The light features a rechargeable battery that is charged by the solar panel during the day, and it has an on/off switch that allows you to manually control the light. The light also has a sensor that automatically turns it on at night and off during the day.

Charleston Solar Path Lights
Customer Service
Introduction
Contents
Position
First Use
Battery
For immediate answers visit our website www.smartlivinghg.com where you will find troubleshooting and
FAQs or contact us using the details below. One year limited manufacturer’s warranty.
Solar lights work by using electricity generated by the solar panel to charge internal batteries. These batteries are
then used to power the light. When switched on the lights automatically illuminate at night by using a sensor. The
duration of illumination will depend on the amount of sunlight and therefore charge received by the batteries.
Although there may be some charge left in the battery we
recommend fully charging it before first use. Leave the
switch in the off position for 2 sunny days to ensure the
battery is fully charged. Once fully charged switch to on
position. The light will now automatically illuminate when it
gets dark. You can cover the solar panel to test that the light
is operating.
Rechargeable batteries become less efficient with repeated
charge-discharge cycles and the battery capacity reduces. If you find
that the battery appears to be less efficient or does not run for long we
suggest you first try to boost charge it. Switch off for 3 to 5 sunny days
to allow the maximum charge to the battery. If after this boost charge
your battery still does not perform to expectations you should replace
it. To change the battery remove the 3 screws on the underside of the
top to remove the battery cover.
Remove the existing battery and replace with a new one. Only use
Ni-MH or Ni-Cd rechargeable batteries. Please ensure that the battery
is disposed of according to local regulations.
Position the light to receive the maximum amount of sunlight.
Do not position under bright light as this will
prevent the light switching on at night.
Ground stake
Mounting tube
Light with solar panel
x3
ON OFF
unscrew top
inside view of top
inside view of top
remove and
replace battery
on/off switch
www.smartlivinghg.com
Follow us on Facebook
facebook.com/SmartLivinghg
Smart Solar is a Smart Living Home & Garden brand.
  • Page 1 1

Smart Solar 3426WRM6-AB Installation guide

Type
Installation guide

Smart Solar 3426WRM6-AB is a solar-powered light that automatically illuminates at night. It is designed to be positioned in an area with maximum sunlight exposure, and it can be used for a variety of purposes, such as illuminating pathways, driveways, or gardens. The light features a rechargeable battery that is charged by the solar panel during the day, and it has an on/off switch that allows you to manually control the light. The light also has a sensor that automatically turns it on at night and off during the day.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI