2. Zebra
  3. ST6080

Zebra ST6080 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Zebra ST6080 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Page 1 of 2 Part No. 1005974 Revision A
Installation Instruction for ST6080 Rubber Boot
1. Installation of the ST6080 Yellow Rubber Boot for Standard Back
STEP 1.
INSERT HANDHELD THROUGH
OPENING IN THE RUBBER BOOT
AS SHOWN IN FIGURE A.
STEP 2.
SECURELY FIT THE FRONT
END OF THE HANDHELD IN
THE END OF RUBBER BOOT.
SEE FIGURE B.
Continued on other side…
Figure A
Figure B
Page 2 of 2 Part No. 1005974 Revision A
STEP 4.
FIGURE E SHOWS THE
COMPLETED ASSEMBLY
OF THE RUBBER BOOT.
STEP 3.
FIRMLY PULL BOTTOM CORNERS OF RUBBER BOOT (ONE AT A TIME
WORKS BEST) AROUND THE END OF THE HANDHELD UNTIL SECURELY
ENCLOSED. AS SHOWN IN FIGURES C AND D.
Appendix A: Support Services
Fortechnicalsupport,pleasevisittheSupportsectionofourcommunityIngenuityWorking:http://community.psion.com/support
.
Figure C Figure D
Figure E
/