2. Way Basics
  3. BS-285-340-1150-BK

Way Basics BS-285-340-1150-BK User manual

  • Hello! I am an AI chatbot trained to assist you with the Way Basics BS-285-340-1150-BK User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Watch and Assemble www.waybasics.com/help-triple-cube-plus Help and Comments www.waybasics.com/contact Share and Win www.waybasics.com/share
Important
Tip Start assembly from bottom to top.
DO NOT place unit on its side or back as
it will compromise its structural integrity.
THIS SIDE UP
1 2
5 6
Carefully remove the
3M protective layer from
adhesive.
Place alignment pins
in vertical zBoards.
Align vertical zBoards
and backer board to
horizontal zBoard.
Align middle zBoard.
3 Align vertical zBoards and
backer board to horizontal
zBoard.
4 Align middle zBoard.
7 Align vertical zBoards
and backer board to
horizontal zBoard.
8 Align horizontal zBoard. Visit
links below for more details.
Enjoy building possibilities!
3 Backer Boards
thin and has no adhesive
2 Horizontal zBoards
with grooves
6 Vertical zBoards
adhesive strips on 2 edges
24 Pins
2 Middle zBoards
with grooves on 2 sides
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
Included
TRIPLE CUBE PLUS
• Assemble your unit on a flat even surface, carpet not recommended
• Furniture is for indoor use only
• When moving your Way Basics furniture, lift from the bottom
• Make sure zBoard surfaces are clean and dry
/