Grizzly G0451 Owner's manual

Brand: Grizzly

Model: G0451

Type: Owner's manual

MODEL G0451

14" SLIDING TABLE SAW

OWNER'S MANUAL

8DENG><=I6EG>A!'%%*7N<G>OOAN>C9JHIG>6A!>C8#!G:K>H:9B6N!'%&& IH

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

;DGBD9:AHB6CJ;68IJG:9H>C8:*$&%:L+.(,EG>CI:9>CI6>L6C

This manual provides critical safety instructions on the proper setup,

operation, maintenance, and service of this machine/tool. Save this

document, refer to it often, and use it to instruct other operators.

Failure to read, understand and follow the instructions in this manual

may result in fire or serious personal injury—including amputation,

electrocution, or death.

The owner of this machine/tool is solely responsible for its safe use.

This responsibility includes but is not limited to proper installation in

a safe environment, personnel training and usage authorization,

proper inspection and maintenance, manual availability and compre-

hension, application of safety devices, cutting/sanding/grinding tool

integrity, and the usage of personal protective equipment.

The manufacturer will not be held liable for injury or property damage

from negligence, improper training, machine modifications or misuse.

3OMEDUSTCREATEDBYPOWERSANDINGSAWINGGRINDINGDRILLINGAND

OTHERCONSTRUCTIONACTIVITIESCONTAINSCHEMICALSKNOWNTOTHE3TATE

OF#ALIFORNIATOCAUSECANCERBIRTHDEFECTSOROTHERREPRODUCTIVE

HARM3OMEEXAMPLESOFTHESECHEMICALSARE

s ,EADFROMLEADBASEDPAINTS

s #RYSTALLINESILICAFROMBRICKSCEMENTANDOTHERMASONRYPRODUCTS

s !RSENICANDCHROMIUMFROMCHEMICALLYTREATEDLUMBER

9OURRISKFROMTHESEEXPOSURESVARIESDEPENDINGONHOWOFTENYOU

DOTHISTYPEOFWORK4OREDUCEYOUREXPOSURETOTHESECHEMICALS

7ORKINAWELLVENTILATEDAREAANDWORKWITHAPPROVEDSAFETYEQUIP

MENTSUCHASTHOSEDUSTMASKSTHATARESPECIALLYDESIGNEDTOFILTER

OUTMICROSCOPICPARTICLES

Table of Contents

INTRODUCTION ............................................... 2

BVcjVa6XXjgVXn########################################### '

8dciVXi>c[d####################################################'

>YZci^[^XVi^dc7Vh^X8dcigdah####################### (

<adhhVgnD[IZgbh######################################### +

BVX]^cZ9ViVH]ZZi###################################### ,

8jii^c\8VeVX^i^Zh######################################## &%

SECTION 1: SAFETY ..................................... 11

HV[Zin>chigjXi^dch[dgBVX]^cZgn################ &&

6YY^i^dcVaHV[Zin[dgIVWaZHVlh################# &(

SECTION 2: POWER SUPPLY ...................... 14

KdaiV\Z8dckZgh^dc###################################### &+

SECTION 3: SETUP ....................................... 17

CZZYZY[dgHZije######################################### &,

JceVX`^c\#################################################### &,

=VgYlVgZGZXd\c^i^dc8]Vgi####################### &-

>ckZcidgn######################################################&.

8aZVcje######################################################## '&

H^iZ8dch^YZgVi^dch###################################### ''

Bdk^c\EaVX^c\7VhZJc^i######################## '(

6hhZbWanHZije####################################### ')

EdlZg8dccZXi^dc######################################## ('

IZhiGjc###################################################### ((

SECTION 4: OPERATIONS ........................... 35

DeZgVi^dcDkZgk^Zl##################################### (*

Ldg`e^ZXZ>cheZXi^dc################################### (+

Cdc"I]gdj\]I]gdj\]8jih##################### (+

7aVYZ<jVgYG^k^c\@c^[Z######################### (,

7aVYZGZfj^gZbZcih#################################### (.

7aVYZHZaZXi^dc############################################ (.

8]Vc\^c\BV^c7aVYZ################################## )&

8]Vc\^c\6Y_jhi^c\HXdg^c\7aVYZ########### )'

G^e8jii^c\################################################### )(

8gdhhXjii^c\################################################# )*

B^iZg8jii^c\################################################# ),

9VYd8jii^c\################################################ )-

GVWWZi8jii^c\############################################# ).

GZhVl^c\##################################################### *%

SECTION 5: SHOP MADE SAFETY

ACCESSORIES .............................................. 52

;ZVi]ZgWdVgYh############################################## *'

Ejh]Hi^X`h################################################## **

Ejh]7adX`h################################################# *+

CVggdl"G^e6jm^a^Vgn;ZcXZEjh]7adX`## *,

SECTION 6: AFTERMARKET

ACCESSORIES FROM GRIZZLY .................. 59

SECTION 7: MAINTENANCE ......................... 61

HX]ZYjaZ###################################################### +&

8aZVc^c\#######################################################+&

JceV^ciZY8Vhi>gdc##################################### +&

AjWg^XVi^dc################################################### +'

SECTION 8: SERVICE ................................... 63

IgdjWaZh]ddi^c\########################################### +(

7ZaiHZgk^XZ################################################## +*

7aVYZI^ai8Va^WgVi^dc#################################### ++

Ha^Y^c\IVWaZEVgVaaZa6Y_jhibZci################ +,

IVWaZBdkZbZci6Y_jhibZci####################### +-

HfjVg^c\8gdhhXji;ZcXZid7aVYZ############## +.

6Y_jhi^c\G^k^c\@c^[ZBdjci^c\7adX`######## ,%

SECTION 9: WIRING ...................................... 71

L^g^c\HV[Zin>chigjXi^dch############################ ,&

L^g^c\DkZgk^Zl########################################### ,'

:aZXig^XVa7dmVi''%KL^g^c\###################### ,(

:aZXig^XVa7dmVi))%KL^g^c\###################### ,)

8dcigdaEVcZaL^g^c\#################################### ,*

BV^cBdidgL^g^c\######################################## ,+

HXdg^c\BdidgL^g^c\################################### ,,

SECTION 10: PARTS ..................................... 78

:aZXig^XVa8dbedcZcih################################# ,-

8gdhhXji;ZcXZ############################################ ,.

8gdhhXjiIVWaZ############################################# -%

8VW^cZi7dYn############################################### -&

BV^c7aVYZ################################################### -(

BV^c7aVYZ6gWdg######################################### -*

Ha^Y^c\IVWaZ################################################ -+

IVWaZh########################################################## --

G^e;ZcXZ##################################################### -.

HXdg^c\Bdidg############################################### .%

6Y_jhibZciL]ZZah###################################### .'

Hl^c\6gb#################################################### .(

BV^cBdidgEVgih######################################### .)

BVX]^cZAVWZah6######################################## .*

BVX]^cZAVWZah7######################################## .+

WARRANTY & RETURNS ........................... 101

"'"

BdYZa<%)*&B[\#H^cXZ*$&%

INTRODUCTION

LZVgZegdjYidd[[Zgi]^hbVcjVal^i]ndjgcZl

bVX]^cZ LZkZ bVYZ ZkZgn Z[[dgi id WZ ZmVXi

l^i] i]Z ^chigjXi^dch! heZX^[^XVi^dch! YgVl^c\h!

VcY e]did\gVe]h d[ i]Z bVX]^cZ lZ jhZY l]Zc

lg^i^c\i]^hbVcjVa#=dlZkZg!hdbZi^bZhlZhi^aa

bV`ZVcdXXVh^dcVab^hiV`Z#

6ahd!dl^c\id djgeda^Xnd[Xdci^cjdjh^begdkZ"

bZci!your machine may not exactly match the

manual#>[ndj[^cYi]^hidWZi]ZXVhZ!VcYi]ZY^["

[ZgZcXZWZilZZci]ZbVcjVaVcYbVX]^cZaZVkZh

ndj ^c YdjWi! X]ZX` djg lZWh^iZ [dg i]Z aViZhi

bVcjVajeYViZdgXVaaiZX]c^XVahjeedgi[dg]Zae#

7Z[dgZXVaa^c\![^cYi]ZbVcj[VXijgZYViZd[ndjg

bVX]^cZWnadd`^c\Vii]ZYViZhiVbeZY^cidi]Z

bVX]^cZ >9 aVWZa hZZ WZadl# I]^h l^aa ]Zae jh

YZiZgb^cZ ^[ i]Z bVcjVa kZgh^dc ndj gZXZ^kZY

bViX]Zhi]ZbVcj[VXijgZYViZd[ndjgbVX]^cZ#

;dgndjgXdckZc^ZcXZ!lZedhiVaaVkV^aVWaZbVc"

jVahVcYbVcjVajeYViZh[dg[gZZdcdjglZWh^iZ

Viwww.grizzly.com#6cnjeYViZhidndjgbdYZa

d[ bVX]^cZ l^aa WZ gZ[aZXiZY ^c i]ZhZ YdXjbZcih

VhhddcVhi]Z

VgZXdb

aZiZ#

BVcj[VXijgZ9ViZ

d[NdjgBVX]^cZ

Manual Accuracy

LZ hiVcY WZ]^cY djg bVX]^cZh# >[ ndj ]VkZ

VcnfjZhi^dch dg cZZY]Zae! jhZ i]Z ^c[dgbVi^dc

WZadlidXdciVXijh#7Z[dgZXdciVXi^c\!eaZVhZ\Zi

i]ZhZg^Va cjbWZg VcYbVcj[VXijgZ YViZ d[ ndjg

bVX]^cZ#I]^hl^aa]Zaejh]Zaendj[VhiZg#

<g^ooanIZX]c^XVaHjeedgi

&'%(AnXdb^c\BVaa8^gXaZ

BjcXn!E6&,,*+

E]dcZ/*,%*)+".++(

:bV^a/iZX]hjeedgi5\g^ooan#Xdb

LZlVcindjg[ZZYWVX`dci]^hbVcjVa#L]ViY^Y

ndj a^`Z VWdji ^i4 L]ZgZ XdjaY ^i WZ ^begdkZY4

EaZVhZiV`ZV[Zlb^cjiZhid\^kZjh[ZZYWVX`#

<g^ooan9dXjbZciVi^dcBVcV\Zg

E#D#7dm'%+.

7Zaa^c\]Vb!L6.-'',"'%+.

:bV^a/bVcjVah5\g^ooan#Xdb

Contact Info

BdYZa<%)*&B[\#H^cXZ*$&%

"("

Identification & Basic Controls

JhZFigures 1–5VcYi]Z[daadl^c\YZhXg^ei^dchid

\V^c Vc jcYZghiVcY^c\d[i]Z[ZVijgZhVcY WVh^X

Xdcigdahd[i]ZiVWaZhVl#I]^h`cdlaZY\Zl^aaWZ

gZfj^gZY id egdeZgan hZi je i]Z bVX]^cZ [dg i]Z

iZhigjc#

A. Flip Stops. JhZY[dgfj^X`XgdhhXjii^c\bZV"

hjgZbZcih#

B. Crosscut Fence. JhZY Yjg^c\ XgdhhXjii^c\

deZgVi^dch# ;ZVijgZh V hXVaZ VcY bjai^eaZ

[a^e"hinaZ hide WadX`h [dg egZX^hZ! gZeZViVWaZ

XgdhhXjii^c\deZgVi^dch#

C. Sliding Table·8dckZc^Zcian \a^YZh i]Z

ldg`e^ZXZ i]gdj\] i]Z WaVYZ l^i] egZX^h^dc

VcYZVhZ#

Figure 1. BV^ck^Zld[bVX]^cZ[ZVijgZhVcYXdcigdah#

;

D. Blade Guard. BV^ciV^ch bVm^bjb egdiZX"

i^dc VgdjcY i]Z hVl WaVYZ! VcY V ' Yjhi

edgiZ[[ZXi^kZanZmigVXihYjhi[gdbi]ZXjii^c\

deZgVi^dc#

E. Rip Fence. ;ZVijgZhb^Xgd"VY_jhibZci`cdW

[dgegZX^h^dcVY_jhibZcih#;ZcXZ[VXZXVcWZ

edh^i^dcZY[dghiVcYVgYXjii^c\deZgVi^dch!dg

^c i]Z adlZg edh^i^dc! [dg WaVYZ \jVgY XaZVg"

VcXZYjg^c\cVggdlg^ee^c\deZgVi^dch#

F. Control Panel. ;ZVijgZh ejh]"Wjiidc Xdc"

igdah [dg deZgVi^c\ i]Z bVcn [ZVijgZh d[ i]Z

hVl#

G. Blade Angle Handwheel. 6Y_jhihi]ZVc\aZ

d[i]ZhVlWaVYZh#

H. Blade Elevation Handwheel. 6Y_jhih i]Z

]Z^\]id[i]ZbV^chVlWaVYZ#

I. Crosscut Table. Egdk^YZh V l^YZ! hiVWaZ

eaVi[dgb[dghjeedgi^c\[jaa"h^oZeVcZahYjg^c\

XgdhhXjii^c\deZgVi^dch#

To reduce the risk of

serious injury when using

this machine, read and

understand this entire

manual before beginning

any operations.

")"

BdYZa<%)*&B[\#H^cXZ*$&%

O. Riving Knife·BV^ciV^ch`Zg[deZc^c\Yjg^c\

Xjii^c\deZgVi^dch# I]^h[jcXi^dc^hXgjX^Va^c

egZkZci^c\`^X`WVX`XVjhZYWni]Z`Zg[Xadh"

^c\WZ]^cYi]ZWaVYZ#

P. Scoring Blade·HbVaa Xjii^c\ WaVYZ i]Vi

gdiViZh deedh^iZ i]Z bV^c hVl WaVYZ# I]Z

WaVYZhXdgZhi]Zldg`e^ZXZWZ[dgZi]ZVXijVa

Xjii^c\ deZgVi^dc ^h eZg[dgbZY egZkZci^c\

iZVg"dji ^c aVb^cViZ bViZg^Vah# I]Z hXdg^c\

WaVYZ^hVY_jhiVWaZ[dglVgYVcYWVX`lVgY!je

VcYYdlc!VcY^ci]^X`cZhhd[`Zg[#

Q. Main Blade·EZg[dgbh i]Z Xjii^c\ deZgV"

i^dch#

Figure 3#7aVYZh#

J. Fence Assembly Lock Down Lever.

HZXjgZhi]Z[ZcXZVhhZbWan^cedh^i^dcVadc\

i]Z[ZcXZgV^a#

K. Rip Fence Scale. 6aadlh egZX^hZ bZVhjgZ"

bZcih[dgg^eXjii^c\deZgVi^dch#

L. Slide Lock Handle. HZXjgZh i]Z Vajb^cjb

[ZcXZ e^ZXZ dc ^ih [dglVgY$WVX`lVgY ha^YZ

igVX`#

M. Micro-Adjustment Lock Knob. HZXjgZhi]Z

[ZcXZ V[iZg ^i ]Vh WZZc VY_jhiZY l^i] i]Z

b^Xgd"VY_jhibZci`cdW#

N. Micro-Adjustment Knob. EgZX^hZan VY_jhih

i]Z[ZcXZ#

Figure 2#;ZcXZXdcigdah#

BdYZa<%)*&B[\#H^cXZ*$&%

"*"

R. Power ON/OFF Switch. 8dccZXihedlZgid

Vaa bdidgh ^c i]Z hVl! VcY XVc WZ Y^hVWaZY

l^i]i]Z`Zn#

S. Power Indicator Light. >cY^XViZhVa^kZedlZg

XdccZXi^dcidi]ZbVX]^cZ#

T. Main Blade OFF Button. Hideh i]Z bV^c

hVlWaVYZbdidg#

U. Scoring Blade OFF Button. Hidehi]ZhXdg"

^c\WaVYZbdidg#

V. Primary Emergency Stop Button.

9^hXdccZXihedlZgidWdi]bdidgh#

W. Scoring Blade ON Button. HiVgihi]ZhXdg"

^c\WaVYZ#

 Note: The main saw blade must be ON for

the scoring blade to start.

X. Main Blade ON Button. HiVgihi]ZbV^chVl

WaVYZ#

Figure4#8dcigdaeVcZa#

Y. Scoring Blade Elevation Knob. 6Y_jhihi]Z

]Z^\]id[i]ZhXdg^c\WaVYZ#

Z. Scoring Blade Alignment Knob. 6Y_jhihi]Z

h^YZ"id"h^YZVa^\cbZcid[i]ZhXdg^c\WaVYZid

i]ZbV^cWaVYZ#

AA. Secondary Emergency Stop Button.

9^hXdccZXihedlZgidWdi]bdidgh#

Figure 5.H^YZXdcigdah#

"+"

BdYZa<%)*&B[\#H^cXZ*$&%

I]Z[daadl^c\^hVa^hid[XdbbdcYZ[^c^i^dch!iZgbhVcYe]gVhZhjhZYi]gdj\]djii]^hbVcjVaVhi]ZngZaViZ

idi]^hiVWaZhVlVcYlddYldg`^c\^c\ZcZgVa#7ZXdbZ[Vb^a^Vgl^i]i]ZhZiZgbh[dgVhhZbWa^c\!VY_jhi^c\

dgdeZgVi^c\i]^hbVX]^cZ#NdjghV[Zin^hVERY ^bedgiVciidjhVi<g^ooan

Arbor:BZiVah]V[iZmiZcY^c\[gdbi]ZYg^kZ

bZX]Vc^hb!idl]^X]hVlWaVYZ^hbdjciZY#

Bevel Edge Cut:I^ai^c\i]ZVgWdgVcYhVlWaVYZ

idVc Vc\aZ WZilZZc% VcY)*idXjiVWZk"

ZaZYZY\ZdcidVldg`e^ZXZ#

Blade Guard:BZiVadgeaVhi^XhV[ZinYZk^XZi]Vi

bdjcih dkZg i]Z hVl WaVYZ# >ih [jcXi^dc ^h id

egZkZci i]Z deZgVidg[gdbXdb^c\ ^cid XdciVXi

l^i]i]ZhVlWaVYZ#

Crosscut:8jii^c\deZgVi^dc^cl]^X]i]ZXgdhhXji

[ZcXZ^hjhZYidXjiVXgdhhi]Z\gV^c!dgVXgdhh

i]Zh]dgiZhil^Yi]d[i]Zldg`e^ZXZ#

Dado Blade:7aVYZdghZid[WaVYZhi]ViVgZjhZY

idXji\gddkZhVcYgVWWZih#

Dado Cut: 8jii^c\ deZgVi^dc i]Vi jhZh V YVYd

WaVYZidXjiV[aViWdiidbZY\gddkZ^cidi]Z[VXZ

d[i]Zldg`e^ZXZ#

Featherboard: HV[Zin YZk^XZ jhZY id `ZZe i]Z

ldg`e^ZXZV\V^chii]Zg^e[ZcXZVcYV\V^chii]Z

iVWaZhjg[VXZ#

Kerf: I]Z gZhjai^c\ Xji dg \Ve ^c i]Z ldg`e^ZXZ

V[iZg i]Z hVl WaVYZ eVhhZh i]gdj\] Yjg^c\ V

Xjii^c\deZgVi^dc#

Kickback: 6c ZkZci ^c l]^X] i]Z ldg`e^ZXZ ^h

egdeZaaZYWVX` idlVgYhi]ZdeZgVidgViV]^\]

gViZd[heZZY#

Parallel:7Z^c\VcZfjVaY^hiVcXZVeVgiViZkZgn

ed^ci Vadc\ ild \^kZca^cZh dg eaVcZh# >#Z# i]Z

g^e[ZcXZ[VXZ^heVgVaaZaidi]Z[VXZd[i]ZhVl

WaVYZ#

Non-Through Cut: 6 hVl^c\ deZgVi^dc i]Vi

gZfj^gZhi]ZgZbdkVad[i]ZWaVYZ\jVgYVcYg^k"

^c\`c^[Z#9VYdVcYgVWWZiXjihVgZXdch^YZgZY

Cdc"I]gdj\]8jihWZXVjhZi]ZWaVYZYdZhcdi

egdigjYZVWdkZi]Zide[VXZd[i]ZlddYhidX`#

6alVnhgZbZbWZgidgZ"^chiVaai]ZWaVYZ\jVgY

VcYg^k^c\`c^[ZV[iZgeZg[dgb^c\Vcdc"i]gdj\]

Xji#

Perpendicular:A^cZhdgeaVcZhi]Vi^ciZghZXiVcY

[dgbg^\]iVc\aZh#>#Z#i]ZWaVYZ^heZgeZcY^XjaVg

idi]ZiVWaZhjg[VXZ#

Push Stick: HV[Zin YZk^XZ jhZY id ejh] i]Z

ldg`e^ZXZ i]gdj\] V Xjii^c\ deZgVi^dc# JhZY

bdhid[iZcl]Zcg^eXjii^c\i]^cldg`e^ZXZh#

Rabbet:8jii^c\deZgVi^dci]ViXgZViZhVcA"h]VeZY

X]VccZaVadc\i]ZZY\Zd[i]Zldg`e^ZXZ#

Riving knife:BZiVaeaViZadXViZYWZ]^cYi]Z

WaVYZ#>ibV^ciV^chi]Z`Zg[deZc^c\^ci]ZlddY

l]ZceZg[dgb^c\VXjii^c\deZgVi^dc#

Straightedge:6iddajhZYidX]ZX`i]Z[aVicZhh!

eVgVaaZa^hb!dgXdch^hiZcXnd[Vhjg[VXZh#

Through Cut: 6 hVl^c\ deZgVi^dc ^c l]^X] i]Z

ldg`e^ZXZ^hXdbeaZiZanhVlci]gdj\]#



Rip Cut:8jii^c\deZgVi^dc^cl]^X]i]Zg^e[ZcXZ

^hjhZYidXjil^i]i]Z\gV^c!dgVXgdhhi]Zl^Y"

Zhil^Yi]d[i]Zldg`e^ZXZ#

Glossary Of Terms

BdYZa<%)*&B[\#H^cXZ*$&%

","

0$&+,1('$7$

6+((7

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

02'(/*6/,',1*7$%/(6$:+3

Product Dimensions:

Weight............................................................................................................................................................ 1309 lbs.

Width (side-to-side) x Depth (front-to-back) x Height........................................................... 105-1/2 x 117-1/2 x 49 in.

Footprint (Length x Width)..................................................................................................................... 54-1/2 x 39 in.

Shipping Dimensions:

Type................................................................................................................................................... Wood Slat Crate

Content........................................................................................................................................................... Machine

Weight............................................................................................................................................................ 1680 lbs.

Length x Width x Height..................................................................................................................... 103 x 46 x 43 in.

Electrical:

Power Requirement..................................................................................................... 220V or 440V, 3-Phase, 60 Hz

Minimum Circuit Size.......................................................................................................... 40A at 220V, 20A at 440V

Switch...................................................................................................... Magnetic with Thermal Overload Protection

Switch Voltage..................................................................................................................................................... 220V

Plug Included........................................................................................................................................................... No

Recommended Plug/Outlet Type.......................................................................................... Hardwire Locking Switch

Voltage Conversion Kit.................................................................................................. Requires Part# G440VG0451

Phase Converter................................................................................................................................................ G7979

Motors:

Scoring

Type........................................................................................................................................... TEFC Induction

Horsepower................................................................................................................................................ 1 HP

Voltage................................................................................................................................................ 220/440V

Prewired..................................................................................................................................................... 220V

Phase.................................................................................................................................................... 3-Phase

Amps....................................................................................................................... 3.6A at 220V, 1.8A at 440V

Speed................................................................................................................................................ 3450 RPM

Cycle......................................................................................................................................................... 60 Hz

Number of Speeds............................................................................................................................................ 1

Power Transfer .................................................................................................................................. Belt Drive

Bearings....................................................................................................................... Shielded and Lubricated

Main

Type........................................................................................................................................... TEFC Induction

Horsepower.............................................................................................................................................. 10 HP

Voltage................................................................................................................................................ 220/440V

Prewired..................................................................................................................................................... 220V

Phase.................................................................................................................................................... 3-Phase

Amps......................................................................................................................... 26A at 220V, 13A at 440V

Speed................................................................................................................................................ 3450 RPM

Cycle......................................................................................................................................................... 60 Hz

Number of Speeds............................................................................................................................................ 1

Power Transfer .................................................................................................................................. Belt Drive

Bearings....................................................................................................................... Shielded and Lubricated

Machine Data Sheet

"-"

BdYZa<%)*&B[\#H^cXZ*$&%

Main Specifications:

Operation Information

Main Blade Size......................................................................................................................................... 14 in.

Main Arbor Size........................................................................................................................................... 1 in.

Scoring Blade Size................................................................................................................................ 120 mm

Scoring Blade Arbor Size........................................................................................................................ 22 mm

Main Blade Tilt................................................................................................................................... 0 - 45 deg.

Main Blade Speed............................................................................................................................. 4200 RPM

Scoring Blade Tilt.............................................................................................................................. 0 - 45 deg.

Scoring Blade Speed......................................................................................................................... 8000 RPM

Cutting Capacities

Max Depth of Cut At 90 Deg.................................................................................................................. 4-1/2 in.

Max Depth of Cut At 45 Deg.................................................................................................................. 3-1/2 in.

Table With Rip Fence Max Cut Width................................................................................................. 32-5/8 in.

Sliding Table With Cross Fence Max Cut Width.................................................................................. 98-3/8 in.

Sliding Table With Cross Fence Max Cut Length.................................................................................... 126 in.

Miter Fence Cut Width At 45 Deg...................................................................................................... 114-1/2 in.

Table Information

Floor To Table Height.......................................................................................................................... 33-1/2 in.

Table Size Length................................................................................................................................ 39-1/4 in.

Table Size Width........................................................................................................................................ 24 in.

Table Size Thickness............................................................................................................................ 2-1/2 in.

Table Size With Ext Wings Length............................................................................................................ 68 in.

Table Size With Ext Wings Width........................................................................................................ 39-3/4 in.

Table Size With Ext Wings Thickness................................................................................................... 2-1/2 in.

Sliding Table Length.................................................................................................................................. 98 in.

Sliding Table Width.............................................................................................................................. 13-3/4 in.

Sliding Table Thickness............................................................................................................................... 6 in.

Sliding Table T Slot Top Width................................................................................................................. 5/8 in.

Sliding Table T Slot Height....................................................................................................................... 5/8 in.

Sliding Table T Slot Bottom Width......................................................................................................... 1-3/8 in.

Fence Information

Fence Type...................................................................................... Single Lever Locking, Extruded Aluminum

Fence Size Length............................................................................................................................... 39-3/8 in.

Fence Size Width.................................................................................................................................. 2-3/8 in.

Fence Size Height................................................................................................................................. 3-1/2 in.

Fence Stops..................................................................................................................................................... 2

Construction Materials

Table.................................................................................................................................................... Cast Iron

Sliding Table....................................................................................................................................... Aluminum

Base........................................................................................................................................................... Steel

Body Assembly........................................................................................................................................... Steel

Cabinet....................................................................................................................................................... Steel

Trunnions............................................................................................................................................. Cast Iron

Rollers........................................................................................................................................................ Steel

Fence Assembly.................................................................................................................. Extruded Aluminum

Rails............................................................................................................................................ Chromed Steel

Guard....................................................................................................................................................... Plastic

Spindle Bearing Type......................................................................................... Radial Ball Bearing 6206-2RS

Paint........................................................................................................................................... Powder Coated

Other Related Information

No of Dust Ports............................................................................................................................................... 2

Dust Port Size.................................................................................................................................... 2-1/2, 5 in.

BdYZa<%)*&B[\#H^cXZ*$&%

"."

Other Specifications:

Country Of Origin ............................................................................................................................................. Taiwan

Warranty ........................................................................................................................................................... 1 Year

Serial Number Location ...................................................................................................................... Grizzly ID Label

Assembly Time .......................................................................................................................................... 2-1/2 hours

Features:

Blade Guard with 2 1/2" Dust Port

5" Main Dust Port

Adjustable Scoring Knife Kerf

Adjustable Riving Knife

Mirco Adjustable, Single Lever Locking Fence

"&%"

BdYZa<%)*&B[\#H^cXZ*$&%

MODEL G0451 14" SLIDING TABLE SAW

8jhidbZgHZgk^XZ/*,%*)+".++(IdDgYZg8Vaa/-%%*'("),,,;Vm/-%%)(-"*.%&

SLIDING TABLE

SAW CAPACITIES

G^ee^c\L^Yi]

B^iZg8ji.%§

ejh]Xji

B^iZg8ji)*§

ejh]Xji

8gdhh8ji

[ZcXZcdiZmiZcYZY

B^iZg8ji)*§

ejh]Xji![ZcXZcdiZmiZcYZY

B^iZg8ji)*§

[ZcXZcdiZmiZcYZY

8gdhh8ji

('"*$-

&'+

.-"($-

&&)"&$'

,("&$-

.-"($-

&'+

).

()"&$'

&'+

&&)"&$'

(("&$'

&'+

BdYZa<%)*&B[\#H^cXZ*$&%

"&&"

For Your Own Safety, Read Instruction

Manual Before Operating this Machine

The purpose of safety symbols is to attract your attention to possible hazardous conditions.

This manual uses a series of symbols and signal words intended to convey the level of impor-

tance of the safety messages. The progression of symbols is described below. Remember that

safety messages by themselves do not eliminate danger and are not a substitute for proper

accident prevention measures.

WEARING PROPER APPAREL. 9d cdi lZVg

Xadi]^c\! VeeVgZa! dg _ZlZagn i]Vi XVc WZXdbZ

ZciVc\aZY ^c bdk^c\ eVgih# 6alVnh i^Z WVX` dg

XdkZgadc\]V^g# LZVgcdc"ha^e[ddilZVgidVkd^Y

VXX^YZciVaha^ehl]^X]XdjaYXVjhZVadhhd[ldg`"

e^ZXZXdcigda#

HEARING PROTECTION. 6alVnh lZVg ]ZVg"

^c\egdiZXi^dcl]ZcdeZgVi^c\dgdWhZgk^^c\adjY

bVX]^cZgn# :miZcYZY ZmedhjgZ id i]^h cd^hZ

l^i]dji]ZVg^c\egdiZXi^dcXVc XVjhZ eZgbVcZci

]ZVg^c\adhh#

MENTAL ALERTNESS. 7Z bZciVaan VaZgi l]Zc

gjcc^c\ bVX]^cZgn# CZkZg deZgViZ jcYZg i]Z

^c[ajZcXZd[Ygj\hdgVaXd]da!l]Zci^gZY!dgl]Zc

Y^higVXiZY#

OWNER’S MANUAL. GZVY VcY jcYZghiVcY

i]^h dlcZg»h bVcjVa 7:;DG: jh^c\ bVX]^cZ#

JcigV^cZYjhZghXVcWZhZg^djhan]jgi#

EYE PROTECTION.6alVnhlZVg6CH>"VeegdkZY

hV[Zin\aVhhZhdgV[VXZh]^ZaYl]ZcdeZgVi^c\dg

dWhZgk^c\ bVX]^cZgn id gZYjXZ i]Z g^h` d[ ZnZ

^c_jgndgWa^cYcZhh[gdb[an^c\eVgi^XaZh#:kZgnYVn

ZnZ\aVhhZhVgZcdiVeegdkZYhV[Zin\aVhhZh#

HAZARDOUS DUST. 9jhi XgZViZY l]^aZ jh^c\

bVX]^cZgn bVn XVjhZ XVcXZg! W^gi] YZ[ZXih! dg

adc\"iZgb gZhe^gVidgn YVbV\Z#7Z VlVgZ d[Yjhi

]VoVgYhVhhdX^ViZYl^i]ZVX]ldg`e^ZXZbViZg^Va!

VcYValVnhlZVgVC>DH="VeegdkZYgZhe^gVidgid

gZYjXZndjgg^h`#

Indicates a potentially hazardous situation which, if not avoided,

MAY result in minor or moderate injury. It may also be used to alert

against unsafe practices.

Indicates a potentially hazardous situation which, if not avoided,

COULD result in death or serious injury.

Indicates an imminently hazardous situation which, if not avoided,

WILL result in death or serious injury.

This symbol is used to alert the user to useful information about

proper operation of the machine.

NOTICE

Safety Instructions for Machinery

SECTION 1: SAFETY

"&'"

BdYZa<%)*&B[\#H^cXZ*$&%



DISCONNECTING POWER SUPPLY.6alVnhY^h"

XdccZXi bVX]^cZ [gdb edlZg hjeean WZ[dgZ hZg"

k^X^c\! VY_jhi^c\! dg X]Vc\^c\ Xjii^c\ iddah W^ih!

WaVYZh!XjiiZgh! ZiX## BV`ZhjgZ hl^iX] ^h ^cD;;

edh^i^dcWZ[dgZgZXdccZXi^c\idVkd^YVcjcZmeZXi"

ZYdgjc^ciZci^dcVahiVgi#

APPROVED OPERATION. JcigV^cZY deZgVidgh

XVc WZ hZg^djhan ]jgi Wn bVX]^cZgn# Dcan Vaadl

igV^cZY dg egdeZgan hjeZgk^hZY eZdeaZ id jhZ

bVX]^cZ# L]Zc bVX]^cZ ^h cdi WZ^c\ jhZY! Y^h"

XdccZXi edlZg! gZbdkZ hl^iX] `Znh! dg adX`"dji

bVX]^cZidegZkZcijcVji]dg^oZYjhZ·ZheZX^Vaan

VgdjcYX]^aYgZc#BV`Zldg`h]de`^Yegdd[

DANGEROUS ENVIRONMENTS. 9d cdi jhZ

bVX]^cZgn ^c lZi dg gV^cn adXVi^dch! XajiiZgZY

VgZVh! VgdjcY [aVbbVWaZh!dg ^c eddgan"a^iVgZVh#

@ZZe ldg` VgZV XaZVc! Ygn! VcY lZaa"a^\]iZY id

b^c^b^oZg^h`d[^c_jgn#

ONLY USE AS INTENDED. Dcan jhZ bVX]^cZ

[dg ^ih ^ciZcYZY ejgedhZ# CZkZg bdY^[n dg VaiZg

bVX]^cZ[dgVejgedhZcdi^ciZcYZYWni]ZbVcj"

[VXijgZgdghZg^djh^c_jgnbVngZhjai

USE RECOMMENDED ACCESSORIES.8dchjai

i]^hdlcZg»hbVcjVadgi]ZbVcj[VXijgZg[dggZX"

dbbZcYZY VXXZhhdg^Zh# Jh^c\ ^begdeZg VXXZh"

hdg^Zhl^aa^cXgZVhZi]Zg^h`d[hZg^djh^c_jgn#

CHILDREN & BYSTANDERS. @ZZe X]^aYgZc

VcYWnhiVcYZghVhV[ZY^hiVcXZVlVn[gdbldg`

VgZV#Hidejh^c\bVX]^cZ^[X]^aYgZcdgWnhiVcY"

ZghWZXdbZVY^higVXi^dc#

REMOVE ADJUSTING TOOLS. CZkZg aZVkZ

VY_jhibZciiddah!X]jX``Znh!lgZcX]Zh!ZiX#^cdg

dcbVX]^cZ·ZheZX^VaancZVgbdk^c\eVgih#KZg^[n

gZbdkVaWZ[dgZhiVgi^c\

SECURING WORKPIECE. L]Zc gZfj^gZY! jhZ

XaVbehdgk^hZhidhZXjgZ ldg`e^ZXZ# 6 hZXjgZY

ldg`e^ZXZegdiZXih]VcYhVcY[gZZhWdi]d[i]Zb

iddeZgViZi]ZbVX]^cZ#

FEED DIRECTION.JcaZhhdi]Zgl^hZcdiZY![ZZY

ldg` V\V^chi i]Z gdiVi^dc d[ WaVYZh dg XjiiZgh#

;ZZY^c\^ci]ZhVbZY^gZXi^dcd[gdiVi^dcbVnejaa

ndjg]VcY^cidi]ZXji#

FORCING MACHINERY.9dcdi[dgXZbVX]^cZ#

>il^aa Yd i]Z_dWhV[ZgVcY WZiiZg Vii]ZgViZ [dg

l]^X]^ilVhYZh^\cZY#

GUARDS & COVERS. <jVgYh VcY XdkZgh XVc

egdiZXi ndj [gdb VXX^YZciVa XdciVXi l^i] bdk^c\

eVgih dg [an^c\ YZWg^h# BV`Z hjgZ i]Zn VgZ egde"

Zgan^chiVaaZY!jcYVbV\ZY!VcYldg`^c\XdggZXian

WZ[dgZjh^c\bVX]^cZ#

NEVER STAND ON MACHINE.HZg^djh^c_jgndg

VXX^YZciVa XdciVXi l^i]Xjii^c\ idda bVn dXXjg ^[

bVX]^cZ^hi^eeZY#BVX]^cZbVnWZYVbV\ZY#

STABLE MACHINE. JcZmeZXiZYbdkZbZciYjg"

^c\deZgVi^dch\gZVian^cXgZVhZhi]Zg^h`d[^c_jgn

VcY adhh d[ Xdcigda# KZg^[n bVX]^cZh VgZ hiVWaZ$

hZXjgZ VcY bdW^aZ WVhZh ^[ jhZY VgZ adX`ZY

WZ[dgZhiVgi^c\#

AWKWARD POSITIONS. @ZZe egdeZg [ddi^c\

VcYWVaVcXZViVaai^bZhl]ZcdeZgVi^c\bVX]^cZ#

9dcdidkZggZVX]6kd^YVl`lVgY]VcYedh^i^dch

i]Vi bV`Z ldg`e^ZXZ Xdcigda Y^[[^Xjai dg ^cXgZVhZ

i]Zg^h`d[VXX^YZciVa^c_jgn#

UNATTENDED OPERATION. CZkZg aZVkZ

bVX]^cZgjcc^c\l]^aZjcViiZcYZY#IjgcbVX]^cZ

OFFVcYZchjgZVaabdk^c\eVgihXdbeaZiZanhide

WZ[dgZlVa`^c\VlVn#

MAINTAIN WITH CARE.;daadlVaabV^ciZcVcXZ

^chigjXi^dch VcY ajWg^XVi^dc hX]ZYjaZh id `ZZe

bVX]^cZ^c\ddYldg`^c\XdcY^i^dc#6c^begdeZgan

bV^ciV^cZYbVX]^cZbVn^cXgZVhZi]Zg^h`d[hZg^"

djh^c_jgn#

CHECK DAMAGED PARTS. GZ\jaVgan ^cheZXi

bVX]^cZ [dg YVbV\ZY eVgih! addhZ Wdaih! b^h"

VY_jhiZY dg b^h"Va^\cZY eVgih! W^cY^c\! dg Vcn

di]Zg XdcY^i^dch i]Vi bVn V[[ZXi hV[Z deZgVi^dc#

6alVnhgZeV^gdggZeaVXZYVbV\ZYdgb^h"VY_jhi"

ZYeVgihWZ[dgZdeZgVi^c\bVX]^cZ#

EXPERIENCING DIFFICULTIES. >[ Vi Vcn i^bZ

ndj VgZ ZmeZg^ZcX^c\ Y^[[^Xjai^Zh eZg[dgb^c\ i]Z

^ciZcYZYdeZgVi^dc!hidejh^c\i]ZbVX]^cZ

8dciVXi djg IZX]c^XVa Hjeedgi 9ZeVgibZci Vi

*,%*)+".++(#

BdYZa<%)*&B[\#H^cXZ*$&%

"&("

HAND POSITIONING.CZkZgejgedhZanidjX]V

hVl WaVYZ Yjg^c\ deZgVi^dc# 6alVnh `ZZe]VcYh$

[^c\Zgh dji d[ i]Z WaVYZ eVi]0 eaVXZ i]Zb l]ZgZ

i]ZnXVccdiha^e^cidi]ZWaVYZVXX^YZciVaan#CZkZg

gZVX]VgdjcY!WZ]^cY!dgdkZgi]ZWaVYZ#IdjX]^c\

Vhe^cc^c\hVlWaVYZl^aaXVjhZhZg^djhaVXZgVi^dc

dgVbejiVi^dc^c_jg^Zh#

BLADE GUARD. JhZ i]Z WaVYZ \jVgY [dg Vaa

¸i]gdj\]Xjih¹[dgl]^X]^iXVcWZjhZY#6i]gdj\]

Xji^hVcdeZgVi^dcl]ZgZi]ZWaVYZXjihXdbeaZiZ"

an i]gdj\] i]Z ide d[ i]Z ldg`e^ZXZ# BV`Z hjgZ

i]ZWaVYZ\jVgY^h^chiVaaZYVcYVY_jhiZYXdggZXian0

egdbeiangZeV^gdggZeaVXZ^i^[YVbV\ZY#6alVnh

gZ"^chiVaaWaVYZ\jVgY^bbZY^ViZanV[iZgdeZgVi^dch

i]Vi gZfj^gZ ^ih gZbdkVa# DeZgVi^c\ hVl l^i] i]Z

WaVYZ\jVgYgZbdkZY\gZVian^cXgZVhZhi]Zg^h`d[

hZkZgZaVXZgVi^dcdgVbejiVi^dc^c_jg^Zh[gdbVXX^"

YZciVaWaVYZXdciVXi#

RIVING KNIFE. JhZ i]Z g^k^c\ `c^[Z[dg Vaa ¸cdc"

i]gdj\]Xjih¹[dgl]^X]^iXVcWZjhZY#6cdc"

i]gdj\]Xji^hVcdeZgVi^dcl]ZgZi]ZWaVYZYdZh

cdi Xji i]gdj\] i]Z ide d[ i]Z ldg`e^ZXZ# BV`Z

hjgZi]Zg^k^c\`c^[Z^hVa^\cZYVcYedh^i^dcZYXdg"

gZXian0VcYegdbeiangZeV^gdggZeaVXZ^i^[YVbV\ZY#

Jh^c\i]Zg^k^c\`c^[Z^cXdggZXianl^aa^cXgZVhZi]Z

g^h`d[`^X`WVX`dgVXX^YZciVaWaVYZXdciVXi#

KICKBACK.@^X`WVX`dXXjghl]Zci]ZhVlWaVYZ

Z_ZXih i]Z ldg`e^ZXZ WVX` idlVgY i]Z deZgVidg#

@cdl]dlidgZYjXZi]Zg^h`d[`^X`WVX`!VcYaZVgc

]dlidegdiZXindjghZa[^[^iYdZhdXXjg#

FEEDING WORKPIECE. ;ZZY^c\ i]Z ldg`e^ZXZ

^cXdggZXianl^aa^cXgZVhZg^h`d[`^X`WVX`#CZkZg

hiVgii]ZhVll^i]Vldg`e^ZXZidjX]^c\i]ZWaVYZ0

Vaadli]ZWaVYZidgZVX][jaaheZZYWZ[dgZXjii^c\#

Dcan [ZZY i]Z ldg`e^ZXZ V\V^chi i]Z Y^gZXi^dc d[

WaVYZ gdiVi^dc# 6alVnh jhZ hdbZ ineZ d[ \j^YZ

[ZcXZ!b^iZg\Vj\Z!ha^Y^c\ iVWaZ dg haZY! ZiX# id

[ZZYi]Zldg`e^ZXZ^cVhigV^\]ia^cZ#CZkZgWVX`V

ldg`e^ZXZdjid[VXjidgignidbdkZ^iWVX`lVgYh

dgh^YZlVnhV[iZghiVgi^c\VXji#;ZZYXjihVaai]Z

lVn i]gdj\] id XdbeaZi^dc# CZkZg eZg[dgb Vcn

deZgVi^dc¸[gZZ]VcY¹bV`^c\VXjil^i]djijh^c\V

[ZcXZ!b^iZg\Vj\Z!dgdi]Zg\j^YZ#

FENCE. BV`Z hjgZ i]Z [ZcXZ gZbV^ch egdeZgan

VY_jhiZYVcYeVgVaaZa l^i] i]ZWaVYZ#6alVnhadX`

i]Z[ZcXZ^ceaVXZWZ[dgZjh^c\#Jh^c\dgVY_jhi^c\

i]Z[ZcXZ^cXdggZXianl^aa^cXgZVhZg^h`d[`^X`WVX`#

PUSH STICKS/BLOCKS.JhZejh]hi^X`hdgejh]

WadX`hl]ZcZkZgedhh^WaZid`ZZendjg]VcYh[Vg"

i]ZgVlVn[gdbi]ZWaVYZl]^aZXjii^c\0^ci]ZZkZci

d[VcVXX^YZcii]ZhZYZk^XZhl^aad[iZciV`ZYVb"

V\Zi]VildjaY]VkZ]VeeZcZYid]VcYh$[^c\Zgh#

CUT-OFF PIECES.CZkZgjhZndjg]VcYhidbdkZ

Xji"d[[hVlVn[gdbi]ZWaVYZl]^aZi]ZhVl^hgjc"

c^c\# >[ V Xji"d[[ WZXdbZh igVeeZY WZilZZc i]Z

WaVYZVcYiVWaZ^chZgi!ijgci]ZhVlOFFVcYVaadl

i]ZWaVYZidXdbeaZiZanhideWZ[dgZgZbdk^c\^i#

BLADE ADJUSTMENTS. 6Y_jhi^c\ i]Z WaVYZ

]Z^\]idgi^aiYjg^c\deZgVi^dc^cXgZVhZhi]Zg^h`d[

XgVh]^c\ i]Z WaVYZ VcY hZcY^c\ bZiVa [gV\bZcih

[an^c\l^i]YZVYan[dgXZVii]ZdeZgVidgdgWnhiVcY"

Zgh#DcanVY_jhii]ZWaVYZ]Z^\]iVcYi^ail]Zci]Z

WaVYZ^hXdbeaZiZanhideeZYVcYi]ZhVl^hOFF#

CHANGING BLADES. 6alVnh Y^hXdccZXi edlZg

WZ[dgZ X]Vc\^c\ WaVYZh# 8]Vc\^c\ WaVYZh l]^aZ

i]Z hVl^h XdccZXiZY id edlZg \gZVian ^cXgZVhZh

i]Z^c_jgng^h`^[hVl^hVXX^YZciVaanedlZgZYje#

DAMAGED SAW BLADES.CZkZgjhZWaVYZh

i]Vi ]VkZ WZZc YgdeeZY dg di]Zgl^hZ YVbV\ZY#

9VbV\ZYWaVYZhXVc[anVeVgiVcYhig^`Zi]ZdeZg"

Vidgl^i]h]VgYhd[bZiVa#

DADO AND RABBET OPERATIONS. 9D CDI

ViiZbei YVYd dg gVWWZi^c\ deZgVi^dch l^i]dji

[^ghi gZVY^c\ i]dhZ hZXi^dch ^c i]^h bVcjVa# 9VYd

VcYgVWWZi^c\deZgVi^dchgZfj^gZheZX^VaViiZci^dc

WZXVjhZ i]Zn bjhi WZ eZg[dgbZY l^i] i]Z WaVYZ

\jVgYgZbdkZY#

CUTTING CORRECT MATERIAL.CZkZgXji

bViZg^Vahcdi^ciZcYZY[dgi]^hhVl0dcanXjicVijgVa

VcYbVc"bVYZlddY egdYjXih!aVb^cViZXdkZgZY

lddYegdYjXih!VcYhdbZeaVhi^Xh#8jii^c\bZiVa!

\aVhh!hidcZ!i^aZ!ZiX#^cXgZVhZhi]Zg^h`d[deZgVidg

^c_jgnYjZid`^X`WVX`dg[an^c\eVgi^XaZh#

Additional Safety for Table Saws

"&)"

BdYZa<%)*&B[\#H^cXZ*$&%

SECTION 2: POWER SUPPLY

Availability

7Z[dgZ^chiVaa^c\i]ZbVX]^cZ!Xdch^YZgi]ZVkV^a"

VW^a^inVcYegdm^b^ind[i]ZgZfj^gZYedlZghjeean

X^gXj^i# >[ Vc Zm^hi^c\ X^gXj^i YdZh cdi bZZi i]Z

gZfj^gZbZcih[dgi]^hbVX]^cZ!VcZlX^gXj^ibjhi

WZ ^chiVaaZY# Id b^c^b^oZ i]Z g^h` d[ ZaZXigdXj"

i^dc![^gZ!dgZfj^ebZciYVbV\Z!^chiVaaVi^dcldg

VcYZaZXig^XVal^g^c\bjhiWZYdcZWnVfjVa^[^ZY

ZaZXig^X^Vc^cVXXdgYVcXZl^i]VaaVeea^XVWaZXdYZh

VcYhiVcYVgYh#

Electrocution, fire, or

equipment damage may

occur if machine is not

correctly grounded and

connected to the power

supply.

Full-Load Current Rating

I]Z [jaa"adVY XjggZci gVi^c\ ^h i]Z VbeZgV\Z V

bVX]^cZYgVlhVi&%%d[i]ZgViZYdjiejiedlZg#

Dc bVX]^cZh l^i] bjai^eaZ bdidgh! i]^h ^h i]Z

VbeZgV\ZYgVlcWni]ZaVg\Zhibdidgdghjbd[Vaa

bdidghVcYZaZXig^XVa YZk^XZhi]Vib^\]ideZgViZ

VidcZi^bZYjg^c\cdgbVadeZgVi^dch#

Full-Load Current Rating at 220V .. 29.6 Amps

Full-Load Current Rating at 440V .. 14.8 Amps

I]Z[jaa"adVYXjggZci^hcdii]ZbVm^bjbVbdjci

d[Vbehi]Vii]ZbVX]^cZl^aaYgVl#>[i]ZbVX]^cZ

^hdkZgadVYZY!^il^aaYgVlVYY^i^dcVaVbehWZndcY

i]Z[jaa"adVYgVi^c\#

>[i]ZbVX]^cZ^hdkZgadVYZY[dgVhj[[^X^ZciaZc\i]

d[i^bZ!YVbV\Z!dkZg]ZVi^c\!dg[^gZbVngZhjai·

ZheZX^Vaan ^[ XdccZXiZY id Vc jcYZgh^oZY X^gXj^i#

IdgZYjXZ i]Z g^h` d[i]ZhZ]VoVgYh!Vkd^Y dkZg"

adVY^c\ i]Z bVX]^cZ Yjg^c\ deZgVi^dcVcY bV`Z

hjgZ^i^hXdccZXiZYidVedlZghjeeanX^gXj^ii]Vi

bZZihi]ZgZfj^gZbZcih^ci]Z[daadl^c\hZXi^dc#

Circuit Requirements for 220V

I]^h bVX]^cZ ^h egZl^gZY id deZgViZ dc V ''%K

edlZghjeeanX^gXj^ii]Vi]VhVkZg^[^ZY\gdjcYVcY

bZZihi]Z[daadl^c\gZfj^gZbZcih/

Nominal Voltage .............................. 220V/240V

Cycle ..........................................................60 Hz

Phase .................................................... 3-Phase

Power Supply Circuit ......................... 40 Amps

Circuit Requirements for 440V

I]^h bVX]^cZ XVc WZ XdckZgiZY id deZgViZ dc V

))%KedlZghjeeangZ[ZgidVoltage Conversion

^chigjXi^dchi]Vi]VhVkZg^[^ZY\gdjcYVcYbZZih

i]Z[daadl^c\gZfj^gZbZcih/

Nominal Voltage .............................. 440V/480V

Cycle ..........................................................60 Hz

Phase .................................................... 3-Phase

Power Supply Circuit ......................... 20 Amps

For your own safety and protection of

property, consult a qualified electrician if

you are unsure about wiring practices or

electrical codes in your area.

Note: The circuit requirements listed in this man

ual apply to a dedicated circuit—where only on

machine will be running at a time. If this machin

will be connected to a shared circuit where mul

tiple machines will be running at the same time,

consult a qualified electrician to ensure that th

circuit is properly sized for safe operation.

6 edlZg hjeean X^gXj^i ^cXajYZh Vaa ZaZXig^XVa

Zfj^ebZciWZilZZci]ZWgZV`ZgWdmdg[jhZeVcZa

^ci]ZWj^aY^c\VcYi]ZbVX]^cZ#I]ZedlZghje"

eanX^gXj^ijhZY[dgi]^hbVX]^cZbjhiWZh^oZYid

hV[Zan]VcYaZi]Z[jaa"adVYXjggZciYgVlc[gdbi]Z

bVX]^cZ [dg Vc ZmiZcYZY eZg^dY d[ i^bZ# >[ i]^h

bVX]^cZ ^h XdccZXiZY id V X^gXj^i egdiZXiZY Wn

[jhZh!jhZVi^bZYZaVn[jhZbVg`ZY9#

Circuit Information

BdYZa<%)*&B[\#H^cXZ*$&%

"&*"

Extension Cords

H^cXZ i]^h bVX]^cZ bjhi WZ eZgbVcZcian Xdc"

cZXiZY id i]Z edlZg hjeean! Vc ZmiZch^dc XdgY

XVccdiWZjhZY#

Connection Type

Figure 6.Ine^XVahZijed[VeZgbVcZcian

XdccZXiZYbVX]^cZ#

EdlZg

HdjgXZ

AdX`^c\

9^hXdccZXiHl^iX]

BVX]^cZ

<gdjcY

8dcYj^i8dcYj^i

6 edlZg XdgY ^h cdi ^cXajYZY! WZXVjhZ i]^h

bVX]^cZ bjhi WZ eZgbVcZcian XdccZXiZY id i]Z

edlZg hjeean# 6 Y^hXdccZXi^c\ bZVch! hjX] Vh

V adX`^c\ hl^iX] hZZ Figure WZadl! bjhi WZ

egdk^YZYidVaadli]ZbVX]^cZidWZY^hXdccZXiZY

^hdaViZY [gdb i]Z edlZg hjeean l]Zc gZfj^gZY#

I]^h^chiVaaVi^dcbjhiWZeZg[dgbZYWnVfjVa^[^ZY

ZaZXig^X^Vc^cVXXdgYVcXZl^i]VaaVeea^XVWaZZaZX"

ig^XVaXdYZhVcYdgY^cVcXZh#

Serious injury could occur if you connect

the machine to power before completing the

setup process. DO NOT connect to power

until instructed later in this manual.

Grounding Instructions

>c i]Z ZkZci d[ V bVa[jcXi^dc dg WgZV`Ydlc!

\gdjcY^c\ egdk^YZh V eVi] d[ aZVhi gZh^hiVcXZ

[dgZaZXig^XVaXjggZciidgZYjXZi]Zg^h`d[ZaZXig^X

h]dX`# 6 eZgbVcZcian XdccZXiZY bVX]^cZ bjhi

WZXdccZXiZYidV\gdjcYZYbZiVaeZgbVcZcil^g"

^c\hnhiZb0dgidVhnhiZb]Vk^c\VcZfj^ebZci"

\gdjcY^c\XdcYjXidg#6aa\gdjcYhbjhiWZkZg^[^ZY

VcY gViZY [dg i]Z ZaZXig^XVa gZfj^gZbZcih d[ i]Z

bVX]^cZ# >begdeZg \gdjcY^c\ XVc ^cXgZVhZ i]Z

g^h`d[ZaZXig^Xh]dX`

"&+"

BdYZa<%)*&B[\#H^cXZ*$&%

3. Ejaai]Z[jhZi]Vi^h^ci]Z¸''%¹hadiVcYejh]

^i^cidi]Z¸))%¹hadihZZFigure 8#

4. GZbdkZi]Z bV^c bdidgdkZgadVYgZaVn hZZ

Figure 9 VcY gZeaVXZ ^i l^i] i]Z dkZgadVY

gZaVn[gdbi]Z))%KXdckZgh^dc`^i#Ijgci]Z

Y^Vadci]ZbV^cbdidgdkZgadVYgZaVnid.6#

5. Dci]ZhXdg^c\bdidgdkZgadVYgZaVn!X]Vc\Z

i]ZY^VahZii^c\id'#+6#

6. DeZci]ZbdidgXVW^cZiYddgVcYgZbdkZi]Z

bdidgl^g^c\XdkZgh[gdbi]ZbV^cbdidgVcY

i]ZhXdg^c\bdidghZZFigure 10#

7. GZ"l^gZ i]Z bdidgh Vh h]dlc dc i]Z Y^V"

\gVbh i]Vi VgZ eaVXZY dc i]Z ^ch^YZ d[ i]Z

bdidgl^g^c\XdkZgh#

I]ZBdYZa<%)*&XVcWZgZl^gZY[dg))%KdeZgV"

i^dc#I]ZcZXZhhVgneVgih[dgi]^hegdXZYjgZXVc

WZejgX]VhZYWnXVaa^c\djgXjhidbZghZgk^XZVi

-%%*'("),,,VcYdgYZg^c\eVgiE%)*&%%&+#

I]^hgZl^g^c\_dWbjhiWZ^cheZXiZYWnVcZaZXig^"

X^VcdgfjVa^[^ZYhZgk^XZeZghdccZaWZ[dgZi]ZhVl

^hXdccZXiZYidi]ZedlZghdjgXZ#6ahd!i]Zbdidgh

XVcWZVXXZhhZYZVh^Zg[dggZl^g^c\^[i]ZWaVYZ^h

bdkZYid%ß.%ßidiVWaZWZ[dgZWZ\^cc^c\#

To rewire the machine for 440V operation:

1. 9>H8DCC:8IH6L;GDBEDL:G

2. DeZci]ZZaZXig^XVaeVcZaVcYadXViZi]Zkdai"

V\ZigVch[dgbZgh]dlc^cFigure 7#

Voltage Conversion

Figure 7.>ch^YZk^Zld[i]ZXdcigdaeVcZa#

:aZXig^XVa

6XXZhh

EVcZa

KdaiV\ZIgVch[dgbZg

BV^cBdidg

DkZgadVYGZaVn

HXdg^c\Bdidg

DkZgadVYGZaVn

Figure 8. ;jhZ^chiVaaZYVii]Z''%KadXVi^dc#

;jhZ

Figure 9.BdidgdkZgadVYgZaVnh#

BV^cBdidg

DkZgadVYGZaVn

HXdg^c\Bdidg

DkZgadVYGZaVn

Figure 10.BdidgadXVi^dch#

HXdg^c\

Bdidg

BV^c

Bdidg

BdYZa<%)*&B[\#H^cXZ*$&%

"&,"

SECTION 3: SETUP

I]Z [daadl^c\VgZcZZYZY id XdbeaZiZi]ZhZije

egdXZhh!WjiVgZcdi^cXajYZYl^i]ndjgbVX]^cZ#

Description Qty

 6cdi]ZgEZghdc###########################################&

 HV[Zin<aVhhZh#################&[dg:VX]EZghdc

 8aZVcZg$9Z\gZVhZg######################6hCZZYZY

 9^hedhVWaZH]deGV\h################6hCZZYZY

 EdlZgA^[i^c\:fj^ebZci

 GViZY[dgViaZVhi&*%%aWh########################&

 A^[i^c\HigVeh

 GViZY[dgViaZVhi&*%%aWh#ZVX]##############'

 HigV^\]iZY\Z)dgadc\Zg###########################&

 BV^c7aVYZ&'dg&)##################################&

 E]^aa^ehHXgZlYg^kZg'################################&

 =ZmLgZcX]Zh(!)!+!-bb########## &:VX]

 LgZcX]ZhdgHdX`Zih&+&-bb##### &:VX]

 9jhi8daaZXi^dcHnhiZb###############################&

 *9jhi=dhZaZc\i]VhcZZYZY################&

 *=dhZ8aVbe############################################'

 '9jhi=dhZaZc\i]VhcZZYZY#############&

 EdlZg8dgYaZc\i]VhcZZYZY##################&

 EdlZg9^hXdccZXi7dml$AdX`^c\Hl^iX]###&

Needed for Setup

This machine presents

serious injury hazards

to untrained users. Read

through this entire manual

to become familiar with

the controls and opera-

tions before starting the

machine!

Wear safety glasses dur-

ing the entire setup pro-

cess!

Ndjg bVX]^cZ lVh XVgZ[jaan eVX`V\ZY [dg hV[Z

igVchedgiVi^dc# GZbdkZ i]Z eVX`V\^c\ bViZg^Vah

[gdb VgdjcY ndjgbVX]^cZ VcY ^cheZXi ^i# >[ ndj

Y^hXdkZgVcnYVbV\Z! please call us immediatel

at (570) 546-9663for advice.

HVkZi]ZXdciV^cZghVcYVaaeVX`^c\bViZg^Vah[dg

edhh^WaZ ^cheZXi^dc Wn i]Z XVgg^Zg dg ^ih V\Zci#

Otherwise, filing a freight claim can be difficult.

L]ZcndjVgZXdbeaZiZanhVi^h[^ZYl^i]i]ZXdcY^"

i^dcd[

djgh]^ebZci!^ckZcidg

i]ZXdciZcih#

Unpacking

SUFFOCATION HAZARD!

Keep children and pets away

from plastic bags or packing

materials unpacked with this

machine. Discard immediately.

The Model G0451 is a heavy

machine that weighs over

1300 lbs. Serious personal

injury may occur if safe

moving methods are not

followed. To be safe, you

will need assistance and

power equipment when

moving the shipping crate

and machine.

"&-"

BdYZa<%)*&B[\#H^cXZ*$&%

Hardware Recognition Chart

Page is loading ...

Grizzly G0451 Owner's manual

Grizzly G0451 Owner's manual

Grizzly G0451 Owner's manual

Related papers

Other documents