Kichler Lighting 43535CLP is a versatile lighting fixture compatible with various ceiling types and bulb options. Its adjustable swivel and customizable stem length allow for precise positioning and desired illumination angles. Installation involves connecting wires, securing the mounting strap, and attaching the canopy. For safety, consult an electrician for proper installation and follow the included instructions.
Kichler Lighting 43535CLP is a versatile lighting fixture compatible with various ceiling types and bulb options. Its adjustable swivel and customizable stem length allow for precise positioning and desired illumination angles. Installation involves connecting wires, securing the mounting strap, and attaching the canopy. For safety, consult an electrician for proper installation and follow the included instructions.
IS-43535-US
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
2) Pass xture wire through end of swivel[C] without
threaded pipe. Thread that end of swivel onto end of last
stem. Note direcon of swivel in accordance with ceiling.
If swivel is not yet installed, follow steps 3, 4 & 5. If swivel
is already installed, go to step 6.
3) Pass xture wire through hole in canopy[D]. Pass
threaded pipe on end of swivel up through hole in
canopy.
4) Pass xture wire through lockwasher[E] . Thread
lockwasher onto end of threaded pipe protruding from
inside canopy.
5) Pass xture wire through hexnut[F]. Thread hexnut onto
end of threaded pipe.
6) Find the appropriate threaded holes on mounng
strap[G]. Assemble mounng screws[H] into threaded
holes.
7) Aach mounng strap to outlet box[I] using the strap
mounng screws[M]. Mounng strap can be adjusted to
suit posion of xture.
8) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a
hole and two raised dimples, wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b) On xtures where a cupped washer is provided,
aach ground wire from outlet box under cupped
washer and green ground screw, then thread into
mounng strap.
If xture is provided with ground wire, connect xture
ground wire to outlet box ground wire with wire
connector aer following the above steps. Never connect
ground wire to black or white power supply wires.
9) Make wire connecon. Reference chart below for correct
connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth (See illus.)
Neutral Wire
10) Push xture to ceiling, carefully passing mounng screws
through holes in canopy. NOTE: Be certain wires do not
get pinched between canopy and ceiling.
11) Use knobs[J] and lockwashers[K] to secure canopy.
Tighten to secure.
12) Insert recommended bulbs (Not supplied).
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
Fixture Diagram
Parts List
[A] Stems
[B] Short
Threaded
Tubes
[C] Swivel
[D] Canopy
[E] Lockwasher
[F] Hexnut
[G] Mounting
Strap
[H] Mounting
Screws
[I] Outlet Box
[J] Knobs
[K] Lockwashers
[L] Fixture Body
[M] Strap
Mounting
Screws
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
Installaon Instrucons
1) Pass xture wire through desired amount of stems[A]
and screw stems together using supplied short threaded
tubes[B]. Thread the assembled stems into the top of
the xture body[L].
NOTE: Thread locking compound must be applied to
all stem threads as noted with (4) symbol to prevent
accidental rotaon of xture during cleaning, relamping,
etc.
Installaon Instrucons (connued)
I
G
D
H
K
J
M
►
A
►
B
►►
►►
►
C
E
F
L
Page is loading ...
IS-43535-CB
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
2) Pass xture wire through end of swivel[C] without
threaded pipe. Thread that end of swivel onto end of last
stem. Note direcon of swivel in accordance with ceiling.
If swivel is not yet installed, follow steps 3, 4 & 5. If swivel
is already installed, go to step 6.
3) Pass xture wire through hole in canopy[D]. Pass
threaded pipe on end of swivel up through hole in
canopy.
4) Pass xture wire through lockwasher[E] . Thread
lockwasher onto end of threaded pipe protruding from
inside canopy.
5) Pass xture wire through hexnut[F]. Thread hexnut onto
end of threaded pipe.
6) Find the appropriate threaded holes on mounng
strap[G]. Assemble mounng screws[H] into threaded
holes.
7) Aach mounng strap to outlet box[I] using the strap
mounng screws[M]. Mounng strap can be adjusted to
suit posion of xture.
8) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a
hole and two raised dimples, wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b) On xtures where a cupped washer is provided,
aach ground wire from outlet box under cupped
washer and green ground screw, then thread into
mounng strap.
If xture is provided with ground wire, connect xture
ground wire to outlet box ground wire with wire
connector aer following the above steps. Never connect
ground wire to black or white power supply wires.
9) Make wire connecon. Reference chart below for correct
connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth (See illus.)
Neutral Wire
10) Push xture to ceiling, carefully passing mounng screws
through holes in canopy. NOTE: Be certain wires do not
get pinched between canopy and ceiling.
11) Use knobs[J] and lockwashers[K] to secure canopy.
Tighten to secure.
12) Insert recommended bulbs (Not supplied).
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
Fixture Diagram
Parts List
[A] Stems
[B] Short
Threaded
Tubes
[C] Swivel
[D] Canopy
[E] Lockwasher
[F] Hexnut
[G] Mounting
Strap
[H] Mounting
Screws
[I] Outlet Box
[J] Knobs
[K] Lockwashers
[L] Fixture Body
[M] Strap
Mounting
Screws
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
Installaon Instrucons
1) Pass xture wire through desired amount of stems[A]
and screw stems together using supplied short threaded
tubes[B]. Thread the assembled stems into the top of
the xture body[L].
NOTE: Thread locking compound must be applied to
all stem threads as noted with (4) symbol to prevent
accidental rotaon of xture during cleaning, relamping,
etc.
Installaon Instrucons (connued)
I
G
D
H
K
J
M
►
A
►
B
►►
►►
►
C
E
F
L
Page is loading ...
-
1
-
2
-
3
-
4
Kichler Lighting 43535CLP is a versatile lighting fixture compatible with various ceiling types and bulb options. Its adjustable swivel and customizable stem length allow for precise positioning and desired illumination angles. Installation involves connecting wires, securing the mounting strap, and attaching the canopy. For safety, consult an electrician for proper installation and follow the included instructions.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
-
Kichler Lighting 43983BK User manual
-
Kichler Lighting 43966PN User manual
-
-
Kichler Lighting 43996CH User manual
-
Kichler Lighting 43996CH User manual
-
Kichler Lighting 43893DBK User manual
-
Kichler Lighting 43531CLP User manual
-
Kichler Lighting 44380BK User manual
-
Kichler Lighting 52094AUB User manual
-
Kichler Lighting 52255BK User manual
Other documents
-
Design House 578518 Installation guide
-
Kichler 52314CLP Operating instructions
-
-
Kichler 44085BK Installation guide
-
-
Warehouse of Tiffany RL7971D Operating instructions
-
-
-
-